Product features:
1. Safe and reliable: safe and reliable: high segmentation capacity, short circuit, overload protection, to ensure safe and reliable operation
2. Remote control: WIFI/Zigbee+RS485 communication, supports remote control of breaking/closing and parameter setting.
3. Manual/automatic setting: manual or automatic mode can be set.
4. Real-time monitoring: read real-time voltage, current, temperature and other parameters, with measurement function.
5. Wide range of applications: mainly used for remote control of power equipment in homes, schools, irrigation, farms, etc.
Product parameters:
Product name: intelligent metering circuit breaker
Rated operating voltage: AC230V/400V
Shell frame rated current: 125A
Breaking capacity: Ics is 6000A
Rated current In: 63A
Lifetime: Mechanical lifespan of 10,000 times, electrical lifespan of 6,000 times
Action characteristics under over-voltage conditions:
Over-voltage action value setting range: AC 240-300V
Over-voltage recovery value Uvor: AC 220-250V
Under-voltage action characteristics:
Under-voltage action value setting range: AC 140-190V
Undervoltage recovery value Uvur: AC 170-220V
Undervoltage action delay time: 0.5S-6S
Communication: WIFI/Zigbee+RS485
Precautions:
1. The circuit breaker shall not be attacked by rainwater during both transportation and storage, and the product shall be stored in a place with good air circulation.
2. During use, dust and dirt should be removed regularly, and it is best to use the face to make the circuit breaker only expose the handle part.
3. The basic technical data on the nameplate or logo should be checked before use to see if they meet the requirements.
4. The protection characteristics of this circuit breaker are set by the manufacturer, and cannot be disassembled and adjusted at will during use.
5. Zero fire wire shall not be connected incorrectly.
6. The wiring screws must be tightened before use to avoid damage to the product due to poor contact.
7. The setting temperature of this series of circuit breakers is 30+5℃, if more than one circuit breaker is installed into the same sealed box should be used to reduce the capacity, the coefficient of capacity reduction is 0.8.
8. The product shall not be frequently open/close the gate, especially the LED screen or switching power supply class, not recommended for power greater than 1kW screen or switching power supply class.
If you need to be used for power greater than 1kW large screen or switching power supply class load, must be done to delay processing, that is, after a delay of 1-2 seconds after the load start.
Delivery list:
Circuit breaker x1
Antenna x1
Wiring x1