• Fitment
  • For Bentley Continental 2003-2013 4.0L/6.0L/6.8L For Volkswagen Phaeton 2004-2006 4.2L/6.0L
  •  
  • Air Suspension Installation Guide
  • 1.Pre-installation Preparation
  • Tools & Accessories
    • General repair sockets, wrenches, torque wrench
    • Jack, safety stands, tire remover
    • Air struts, air pipes, air compressor, air tank, solenoid valves, mounting brackets, sealant, cable ties
    Safety Check
    • Park the vehicle on flat solid ground, engage parking brake and chock wheels.
    • Disconnect vehicle power supply to prevent short circuit.
     
  • 2.Remove Original Shock Absorbers
  • Front Right Air Strut For 2003-2013 Bentley Continental 6.0L 6.8L 4.0L

    Fitment

    For Bentley Continental 2003-2013 4.0L/6.0L/6.8L
    For Volkswagen Phaeton 2004-2006 4.2L/6.0L

     

    Air Suspension Installation Guide

    1.Pre-installation Preparation

    Tools & Accessories

    • General repair sockets, wrenches, torque wrench
    • Jack, safety stands, tire remover
    • Air struts, air pipes, air compressor, air tank, solenoid valves, mounting brackets, sealant, cable ties

    Safety Check

    • Park the vehicle on flat solid ground, engage parking brake and chock wheels.
    • Disconnect vehicle power supply to prevent short circuit.

     

    2.Remove Original Shock Absorbers

    • Lift the car with a jack, secure with safety stands, then remove all tires.
    • Loosen upper and lower mounting bolts of the original shock absorber in order, then take off the original assembly.
    • Clean dust and rust on mounting positions, and inspect suspension parts for damage.

     

    3.Install Main Air Struts

    • Align the air strut with original mounting holes, fasten bolts loosely (do not fully tighten yet).
    • Adjust the angle and position to ensure no jamming or scraping, then tighten bolts to standard torque with a torque wrench.
    • Check the travel range of the air spring to ensure enough operating space.

     

    4.Lay Air Piping

    • Plan the route of air pipes, keep away from high-temperature parts, sharp edges and moving components.
    • Cut air pipes to proper length, connect strut air ports, solenoid valves, air tank and compressor. Apply sealant on joints to prevent air leakage.
    • Fix pipes neatly with cable ties, reserve extra length for vehicle lifting and lowering.

     

    5.Install Electric Control & Air Supply System

    • Mount the air compressor, air tank and solenoid valve set in the trunk or vacant undercarriage area.
    • Connect power wires, control wires and control panel per wiring instructions, wrap all wires for waterproofing.
    • Firmly connect ground wire to vehicle metal body for stable conduction.

     

    6.Debug & Air Leak Test

    • Switch on power, start the compressor to inflate the system. Check if all air struts lift and lower synchronously and smoothly.
    • Apply soapy water on all pipe joints and air ports to find air leaks, then re-seal defective positions.
    • Lift and lower the vehicle repeatedly, test all height levels to verify normal operation.

     

    7.Final Restoration

    • Reinstall tires, remove safety stands and jack, then lower the vehicle to the ground.
    • Double-check all bolts, pipes and wires, and clean the working area.
    • Take a short test drive. The installation is finished if there is no abnormal noise or air leakage.

     

    Important Safety Tips

    1. Please confirm compatibility and the original part number before purchasing.
    2. Installation instructions not included.Self-installation is not recommended for non-professionals. Improper operation may cause suspension failure and driving hazards.Professional installation is recommended.
    3. Regularly inspect air tightness and wire aging to ensure driving safety.
    4. Do not drive for a long time with the vehicle at extreme height or low height.

    Item Specifics
    Brand everpartstorecs
    Manufacturer Part Number 13968908
    Manufacturer Warranty 1 Year
    Placement on Vehicle Front Right
    Type Air Suspension Shock Strut
    Quantity 1
    Material Iron, Aluminium Alloy, Rubber
    Fitment Type Direct Replacement
    Items Included Air Suspension Shock Strut
    Mounting Style Screw-On
    OE Spec or Performance/Custom OE Spec
    Custom Bundle No
    Features Sealed
    Modified Item No
    Adjustable Yes
    Performance Part Yes
    Universal Fitment No
    Vintage Car Part No
    Surface Finish Rust Protected
    Greasable or Sealed Sealed
    Interchange Part Number Air Suspension Shock Strut, Air Ride Shock Strut
    OE/OEM Part Number 3W0616040, 3W5616040, 3W7616040
    Superseded Part Number 3D0616040, 3D5616040, 3D7616040
    Single Weight(KG) 9.870
    Size Single Dimension(CM) 82.00(Length)*20.00(Width)*20.00(Height)
    Drive Layout RWD/4WD
    Platform D1
    Maximum Operating Pressure (psi) 195
    Minimum Operating Pressure (psi) 90
    Upper Mount Type Stud
    Lower Mount Type U-Bracket

    Shipping

    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Payment

    Any payments accepted by ebay also can be accepted.

    Service

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    Note

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.

    Front Right Air Strut For 2003-2013 Bentley Continental 6.0L 6.8L 4.0L

    Fitment

    For Bentley Continental 2003-2013 4.0L/6.0L/6.8L
    For Volkswagen Phaeton 2004-2006 4.2L/6.0L

     

    Air Suspension Installation Guide

    1.Pre-installation Preparation

    Tools & Accessories

    • General repair sockets, wrenches, torque wrench
    • Jack, safety stands, tire remover
    • Air struts, air pipes, air compressor, air tank, solenoid valves, mounting brackets, sealant, cable ties

    Safety Check

    • Park the vehicle on flat solid ground, engage parking brake and chock wheels.
    • Disconnect vehicle power supply to prevent short circuit.

     

    2.Remove Original Shock Absorbers

    • Lift the car with a jack, secure with safety stands, then remove all tires.
    • Loosen upper and lower mounting bolts of the original shock absorber in order, then take off the original assembly.
    • Clean dust and rust on mounting positions, and inspect suspension parts for damage.

     

    3.Install Main Air Struts

    • Align the air strut with original mounting holes, fasten bolts loosely (do not fully tighten yet).
    • Adjust the angle and position to ensure no jamming or scraping, then tighten bolts to standard torque with a torque wrench.
    • Check the travel range of the air spring to ensure enough operating space.

     

    4.Lay Air Piping

    • Plan the route of air pipes, keep away from high-temperature parts, sharp edges and moving components.
    • Cut air pipes to proper length, connect strut air ports, solenoid valves, air tank and compressor. Apply sealant on joints to prevent air leakage.
    • Fix pipes neatly with cable ties, reserve extra length for vehicle lifting and lowering.

     

    5.Install Electric Control & Air Supply System

    • Mount the air compressor, air tank and solenoid valve set in the trunk or vacant undercarriage area.
    • Connect power wires, control wires and control panel per wiring instructions, wrap all wires for waterproofing.
    • Firmly connect ground wire to vehicle metal body for stable conduction.

     

    6.Debug & Air Leak Test

    • Switch on power, start the compressor to inflate the system. Check if all air struts lift and lower synchronously and smoothly.
    • Apply soapy water on all pipe joints and air ports to find air leaks, then re-seal defective positions.
    • Lift and lower the vehicle repeatedly, test all height levels to verify normal operation.

     

    7.Final Restoration

    • Reinstall tires, remove safety stands and jack, then lower the vehicle to the ground.
    • Double-check all bolts, pipes and wires, and clean the working area.
    • Take a short test drive. The installation is finished if there is no abnormal noise or air leakage.

     

    Important Safety Tips

    1. Please confirm compatibility and the original part number before purchasing.
    2. Installation instructions not included.Self-installation is not recommended for non-professionals. Improper operation may cause suspension failure and driving hazards.Professional installation is recommended.
    3. Regularly inspect air tightness and wire aging to ensure driving safety.
    4. Do not drive for a long time with the vehicle at extreme height or low height.


    1.We will ship your order within 2 working days after confirming the payment, and most areas will receive delivery within 2-8 working days.

     

    2.All orders will be shipped from our US warehouses and delivered by USPS,UPS or FedEx.

     

    3.We will deliver the product to the address filled in eBay, if you need to change your address, please make sure you

     tell us the new address within 12 hours after payment 

    (no delivery to remote areas).

     

    4.We will provide you with a logistics tracking number, you can check the logistics status according to the number in time,

     if there are any problems, contact us immediately please.

    Any payments accepted by ebay also can be accepted.

    1. Products can be returned for no reason within 30 days of receipt

     (products to be returned must be in a resalable condition, if they have been used we will not accept the return).

     

    2. If the product does not match the description on the product page, we will exchange or refund the product for free 

    within 30 days.

     

    3. We offer one year warranty, but man-made damage by abuse or wrong operation is not covered by this warranty.

    If you have any concerns about the product or before providing a review or feedback, please contact us immediately, we will give a satisfied solution.

     

    Do check the compatible chart or contact us if you have any quetion in compatibilities before ordering the items.