Key Points:

Pneumatic in-line directional control solenoid valve is body ported spool valve. Solenoid valve is a 4 way, 2 position, single solenoid valve.  This pneumatic electric directional control solenoid valve is operated by a ED 100% continuous duty solenoid.  Directional control valve is a body ported mounting type, valve can be surface mounted. Directional control valve is commonly use to operate linear motion control components such as double acting air cylinder.

Key Features:

Only 25 Psi Can Start the Pneumatic Valve, Which is Easy to Operate, Easy to Install and Easy to Remove.
The Manual Button Tests the Status of the Product when It is Powered Up.two Air Intake Holes Cannot Be Used at the Same Time. when Using, You Need to Block One Side with a Plug.
The Valve Body is Made of High Precision Aluminum with High Hardness and Long Service Life.
The Inner Hole is Machined by a Special Process, with Low Frictional Resistance, Low Starting Air Pressure.
Please Pay Attention to the Direction of Gas Flow and the Correct Connection when Installing. Pay Attention to Dustproof. It is Recommended to Install a Muffler on the Exhaust Port.
Air Solenoid Valve Has Single Control Solenoid Valve Have Internal Pilot Structure, Sliding Column Structure, Good Sealing and Responsive.
Each Thread is Finely Processed, No Burrs, Smooth and Easy to Install.
The Valve Body Contains a High Concentricity Seal Ring, Which is Not Easy to Leak, and the Rubber Pad with Lubricating Oil Reduces Friction.
Each Product Comes with Fittings That Can Be Used Directly. No Need to Buy Additional Accessories, Just Insert 6mm or 1/4"tube.
Manual Operation, Smooth Operation, Accurate and Reliable Positioning. High Precision Stem Fit Degree is High Air Tightness.
Please check product compatibility carefully to ensure it is the product you need
So as not to waste your time and energy on return

Details:

Valve Type: 5 Way, 2 Position, 1 Single Solenoid
Working Medium: 40 Micron Filtered Air
Operation Model: Air Pilot
Action Model: Spool Design Inner Guide Type
Port & Mounting: Body Ported
Flow Rate: 0.67 Cv (25 SCFM@100 PSI)
Response Time: Less than 20 ms
Body Material: Anodized Aluminum
Armature Tube Material: Brass
Coil Power: 3VA  28mA
Coil Class: F Class IP 65
Certification: CE Certification
Coil Duty: 100% ED (Continuous Duty)
Operating Pressure: 21 PSI to 115 PSI
Operating Temperature: 14 to 140 °F
Port Size: 1/8" Inch NPT Female Port
Coil Voltage: 110/120V AC 
Voltage Tolerances: DC: +10% –5% ; AC: +10% -15%

Package Including:

1PC 1/8" pneumatic 5-way electric direction control air solenoid valve
as the picture