|
OPEL • VAUXHALL • PC-BASED DIAGNOSTICS
OP-COM Opel / Vauxhall OBD2 Diagnostic InterfaceFirmware V1.99 • USB-based • Works with all versions of Windows
|
|
The latest high-quality OP-COM interface for diagnosing Opel and Vauxhall vehicles from a PC. It works on most Opel / Vauxhall cars from roughly 1990 to 2010 and beyond, and runs firmware OP-COM V1.99, the latest stable release. The interface is reprogrammable and upgradeable. Read and clear fault codes, watch live data, run output tests and reach a wide range of control units, all from a simple USB connection. |
|
✔ Wide Opel / Vauxhall Coverage Most models from 1990 to 2010+ |
✔ All Windows Versions XP, Vista, 7, 8, 8.1 and 10, in 32-bit and 64-bit |
|
✔ Firmware V1.99 Latest stable release, reprogrammable and upgradeable |
✔ Native USB Interface No serial-to-USB converter, so no compatibility headaches |
|
✔ High-Speed CAN Ready USB speed is fast enough for 500 kbps HS-CAN systems |
✔ Smart Multiplexer Automatically selects the right OBD pin for each module |
| Fault Codes | Read and clear fault codes, each with a full text description and full status (present, not present or intermittent). Print, save or copy the codes into other applications, or jump straight from the fault code window to the measuring blocks. |
| Live Data | Choose measuring blocks from the list on many control modules and view up to 8 parameters at once. Refresh speed depends on the protocol: older systems such as the Omega-B X 25 DT engine (ISO 9141-2) are slower, newer Multec and Bosch units (KWP2000) are quicker, and CAN-based units are very fast. |
| Output Tests | Run output tests on many controllers and get feedback on the state of each activated output, which makes it easier to track down failed components. |
| Keys & Immobiliser | Learn keys to the immobiliser and remote keys to the central locking. Reset and program immobiliser-related items (ECM, BCM, IPC). The vehicle security code is required and can be found on the CAR-PASS. |
| Service & Airbags | Reset and program the service interval reminder on Astra-G, Zafira, Corsa-C and Meriva. Code SAB6 and SAB8 airbags with the software. |
The software supports many control units, for example:
| Engine | Automatic Transmission | ABS | Airbag |
| Engine Cooling Module | Instrument Cluster | Electronic Climate Control | Body Control Unit |
…and many more.
Opel uses many pins in the OBD connector, so the interface works as a multiplexer and picks the correct pin for each communication line.
| Pins 3, 7, 8, 12 | Serial link (ISO 9141, KW81, KW82, KWP2000) |
| Pins 6 – 14 | HS-CAN – dual-wire, high speed CAN-BUS, 500 kbps |
| Pins 3 – 11 | MS-CAN – dual-wire, medium speed CAN-BUS, 95 kbps |
| Pin 1 | SW-CAN – single-wire, low speed CAN-BUS, 33.3 kbps |
| Why USB? Because the interface connects directly by USB, there are no serial-to-USB converter problems. USB is fast enough to handle today’s 500 kbps high-speed CAN-BUS systems, which is why only a USB interface is suitable for CAN-BUS work. |
|
1 x OP-COM Interface 1 x USB Cable 1 x Software CD |
| ✔ Free Delivery | ✔ Same Day Dispatch | ✔ UK Seller |