Description:
Product Name： Single-Phase Solid-State Relay
Dielectric Withstand Voltage] 2500 Vac
Off-State Time： ≤10 Ms
Operating Indicator： Led
Mounting Method： Bolt-Mounted
Control Mode： Da/Dd/Aa/La/Va/Vd (Selectable)
On-State Voltage Drop： ≤1.5 V
On-State Leakage Current： ≤2 Ma
Ambient Temperature： -30 To +75 °C
Two Common Misconceptions Regarding Solid-State Relay Selection:
Misconception 1: A Solid-State Relay Is Essentially An Ac Contactor
Explanation: A) Solid-State Relays Do Not Have Auxiliary Contacts
B) Solid-State Relays Generate Heat During Operation And Must Be Fitted With A Heat Sink
To Function; High-Power Models Require Fan Cooling Or Water Cooling.
To Function; High-Power Models Require Fan Cooling Or Water Cooling.
Misconception 2: The Current Rating Marked On A Solid-State Relay Represents Its Actual Operating Current
Helpful Tip
Solid-State Relays Generate Significant Heat; When Used With Load Currents Exceeding 10 A, They Must Be Fitted With A Heat Sink.
Apply Thermal Grease Between The Solid-State Relay’S Base Plate And The Heat Sink; For Currents Above 60 A, Add Forced Air Cooling.
Dielectric Withstand Voltage] 2500 Vac
Off-State Time： ≤10 Ms
Operating Indicator： Led
Mounting Method： Bolt-Mounted
Control Mode： Da/Dd/Aa/La/Va/Vd (Selectable)
On-State Voltage Drop： ≤1.5 V
On-State Leakage Current： ≤2 Ma
Ambient Temperature： -30 To +75 °C
Two Common Misconceptions Regarding Solid-State Relay Selection:
Misconception 1: A Solid-State Relay Is Essentially An Ac Contactor
Explanation: A) Solid-State Relays Do Not Have Auxiliary Contacts
B) Solid-State Relays Generate Heat During Operation And Must Be Fitted With A Heat Sink
To Function; High-Power Models Require Fan Cooling Or Water Cooling.
To Function; High-Power Models Require Fan Cooling Or Water Cooling.
Misconception 2: The Current Rating Marked On A Solid-State Relay Represents Its Actual Operating Current
Helpful Tip
Solid-State Relays Generate Significant Heat; When Used With Load Currents Exceeding 10 A, They Must Be Fitted With A Heat Sink.
Apply Thermal Grease Between The Solid-State Relay’S Base Plate And The Heat Sink; For Currents Above 60 A, Add Forced Air Cooling.
Package include:According to your choice.
