DRL LED Board
Light Output
Light color: White
Vehicle Compatibility
| Year | 2021-2024 |
|---|---|
| Make | RAM |
| Model / version | 1500 TRX |
| Part reference | 6002TX0619C2 |
Left (LH) and right (RH) are determined while seated inside the vehicle, facing forward. They do not mean the left and right sides when standing in front of the vehicle. Driver / passenger side varies between left-hand-drive and right-hand-drive vehicles.
Product Features
- LED circuit board for the daytime running light applications listed below.
- Board-level replacement component; check the supplied items under Package Contents.
- Match the board reference and mounting arrangement to the headlight configuration.
| Condition | New |
|---|---|
| Light color | White |
Package Contents
- *
Only the items listed above are included. Other parts shown in brand illustrations are not included.
Printed installation instructions are not included.
Installation Notes
No programming required for the part specified in this listing. Thermally conductive silicone adhesive is required for proper heat transfer and product longevity. It is not included and must be purchased separately. A standard thermally conductive silicone adhesive suitable for LED boards can be used.
- Use a screwdriver to gently pry off the original LED board. If it is secured with screws, remove the screws first.
- Check the thermal silicone adhesive marks left by the original board. Following these contact areas, apply thermally conductive silicone adhesive evenly to the back of the replacement board, including the contact area underneath the LED beads.
- Refit the board in its original position and press it flat. Allow the adhesive to cure according to its instructions before completing installation and using the light.
These symptoms may have several causes. Diagnose the fault before replacing components.
- DRL LEDs fail to illuminate
- Uneven daytime running light output
DRL Reference Guide
Reference illustration only. Refer to Package Contents for the items included in this listing.
Check the Light Guide Before Fitting
Before installing the replacement DRL LED board or module, inspect the light guide where it meets the LED source. If this area is burnt or discolored, have a professional assess it and carefully sand / polish the affected area as shown in the guide below. If the damage cannot be corrected, replace the light guide. Check the light guide as well as the LED component when diagnosing poor light output.
About MLJ AUTO PARTS
Brand imagery shows our wider product range. See Package Contents for the item supplied.
Shipping & After-sales
| Warranty period | 1 year |
|---|
Please refer to the shipping information and estimated delivery date shown in this eBay listing. Tracking details will be available in your eBay order when provided by the carrier.
Returns
Please refer to the return period and conditions shown in this eBay listing. For questions about your order or a product issue, contact us through eBay messages. Your statutory rights are not affected.
Warranty Coverage
1-year warranty. Contact us through eBay messages for warranty support.
Contact us through eBay messages with your order details and clear photos of the part.