2PCS 20mm 5x120 to 5x114.3 Wheel Adapters for Honda Acura 64.1-60.1 M12x1.5
Description:
These CMO adapters convert a 5x120 vehicle hub to accept 5x114.3 (5x4.5) wheels. Conversion direction cannot be reversed. The set contains 2 silver adapters, each 20mm (approximately 3/4 inch) thick, with a 64.1mm vehicle-side bore and a 60.1mm wheel-side hub lip. Additional M14x1.5 mounting hardware is included for attaching the adapters to matching factory M14x1.5 hub studs. The adapter's wheel-side studs remain M12x1.5; the included M14x1.5 hardware does not change that wheel-side thread. Select M12x1.5 wheel lug nuts with seats suitable for the wheels.
Fits Honda Civic Type R 2017-2026, Odyssey 2005-2026, Passport 2019-2027, Pilot 2009-2027, Ridgeline 2006-2026; Acura MDX 2007-2013 and 2017-2026, RL 2005-2012, RLX 2014-2020, TL 2009-2014, TLX 2021-2025, ZDX 2010-2013. Civic coverage is limited to the listed Type R trims. Confirm the exact year, trim, and original hub specifications. Wheels must have a 5x114.3 pattern and a bore that accepts the 60.1mm hub lip. A larger bore requires correctly sized hub rings for hubcentric centering. Verify wheel offset, brake clearance, and tire-to-fender clearance; each adapter moves its wheel outward by 20mm.
The forged 6061-T6 aluminum bodies are machined on a 4-axis CNC center and anodized. The wheel-side studs are heat-treated Metric Class 10.9 carbon steel. Check factory-stud protrusion and wheel back-pocket depth; trimming may be required for full wheel-to-adapter contact. Both mounting interfaces must be clean and completely flush. Correct any gap or interference before driving. Follow the supplied installation and torque instructions and recheck torque after 25-50 miles.
Features:
- [HUB-SIDE VEHICLE FITMENT] Fits Honda Civic Type R 2017-2026, Odyssey 2005-2026, Passport 2019-2027, Pilot 2009-2027, Ridgeline 2006-2026; Acura MDX 2007-2013 and 2017-2026, RL 2005-2012, RLX 2014-2020, TL 2009-2014, TLX 2021-2025, ZDX 2010-2013. Verify the exact year, trim and original hub hardware before ordering
- [DIRECTION AND INCLUDED HARDWARE] 2 silver hubcentric adapters, each 20mm (approximately 3/4 inch) thick. Vehicle side: 5x120, 64.1mm bore. Wheel side: 5x114.3, 60.1mm hub lip, M12x1.5 studs. Includes additional M14x1.5 mounting hardware for matching factory hub studs. The wheel-side thread remains M12x1.5
- [4-AXIS CNC PRECISION] Automated 4-axis CNC machining produces consistent bolt-hole placement, uniform thickness and flat mounting faces. The inner bore locates the adapter on the vehicle hub; the 60.1mm outer hub lip centers a matching wheel. Larger wheel bores require correctly sized hub rings to maintain hubcentric centering
- [SGS TESTED MATERIALS] Forged 6061-T6 aluminum combines strength with low weight. The anodized finish helps resist oxidation and surface wear. Heat-treated Metric Class 10.9 carbon steel studs provide the wheel-side fastening points. Aluminum and stud materials are SGS Tested
- [INSTALLATION CHECK] Check factory-stud protrusion and wheel back-pocket depth; trimming may be required for full wheel-to-adapter contact. Clean the mounting faces and require full, gap-free contact at both interfaces. Check fender and suspension clearance. Match hub-side mounting hardware to the original studs; use M12x1.5 wheel nuts with the correct seat. Follow supplied torque instructions and recheck after 25-50 miles