Application
This product is suitable for drilling holes in hard concrete, block, brick, masonry, and other materials, and can be used for air conditioner installation, range hood installation, roadbed construction, engineering bridge drilling, and sewer drilling.
How to Use
1. Fasten it correctly to the machine.
2. Turn on the machine and let the drill rotate in the air to check for balance problems.
3. Hold the machine firmly and apply gentle pressure.
4. Begin drilling.
Specifications
Style: Modern
Shape: Column
Color: Green
Material: 45# Steel
Surface Treatment: High-frequency Welding
Cutting Method: Dry/Wet
Blade Teeth: Turbo Tooth
Thread: M22
Number of Pieces: 4
Segment Height: 10mm/0.39 in
Max. Opening Depth: About 33cm/ 13 in, 31cm/ 12.20 in
Opening Diameter: 5.6cm/ 2.2 in, 7.6cm/ 3 in, 10.2cm/ 4.02 in, 12cm/ 4.72''
Product Height: 37cm/ 14.56 in, 35cm/ 13.78 in
Package Included
4* Open-hole Drills
Notes
- Please refer to the product specifications in mm units.
- Please note that the thread diameter of the drill is M22. Please make sure your product can use M22 thread diameter before your order.
- Please note that this product can not make holes in land wood and stone.
- Please note that it is used dry for punching brick walls and with water for reinforced concrete. Water must be added during use in wet environments.
- Please do not use excessive force or shake the drill while working.
- If you find it difficult to drill, please take a short break and have it checked.
- Please note that do not use impact or hammering mode! Electric hammers and impact drills are not recommended.
- Please note that this product is only suitable for hand-held water drilling machines and desktop water drilling machines. Use with other machines need to add the adapter, but this case can only hit the brick wall and can only be used by small models.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.