ANCEL L100 Digital Pressure Gaug Vacuum Smoke Tester Smoke Machine Leak Detector

ANCEL L100 Automotive Smoke Machine Leak Detector, EVAP Vacuum Smoke Leak Tester with Digital Pressure Gauge for Pipeline Fuel Exhaust Leak Test, Smoke Tester Automotive for 12V Cars System 
ANCEL L100 Automotive Smoke Machine Features
💹 For Low-Pressure System Leak Detection: The L100 smoke machine automotive is not only suitable for detecting leaks in automotive EVAP systems but also applicable for fuel tank ventilation, crankcase air leakage, front and rear oil seal leaks, throttle valve air leaks, intake manifold gasket leaks, exhaust pipe leaks, various joint leaks, inadequate valve closure, water ingress in oil passages, and diagnosing leaks and water noise in car windows, among other leakage test.
💹 The Latest Digital Pressure Gauge: The L100 automotive smoke machine comes with a built-in digital pressure gauge, allowing you to select from four units - Psi, Bar, Kpa, and kg/cm². It displays a range from -85 to 200Kpa, with precision to 0.001Psi. This assists you in monitoring pressure changes effectively for leak detection and diagnosis.
💹 Concealed Adjustable Flow Valve: The L100 EVAP smoke machine leak tester comes with an adjustable flow valve, which controls the smoke output of the smoke tester. This helps eliminate interference from excessive smoke and accurately locate leaks. Rotate clockwise to reduce flow and counterclockwise to increase flow.
💹 1/2PSIG Smart Pressure Relief Valve: Specially designed for EVAP system smoke leak detection, the intelligent pressure relief valve of EVAP smoke machine can reduce any external gas source pressure to 1/2PSIG, effectively safeguarding hoses and smoke leak detector.
💹 Smoke Diffuser: The smoke diffuser in a car smoke machine spreads smoke evenly to pinpoint leaks or emission points. It attaches to the detector's output, dispersing smoke uniformly into the area. This process helps locate leaks by highlighting areas where smoke gathers, making issues easier to identify.
💹 Instant Odorless Smoke: The L100 smoke leak detector automotive produces enough smoke instantly and consistently for long periods of time to produce odorless smoke.
💹 Lightweight Smoke Test Machine: Compact at 3.26''*2.87''*6.22 and lightweight at 2.3 pounds. L100 comes with a velcro strap for easy storage of the smoke delivery hose and power cord.

 

Smoke Oil  Choose
The equipment is compatible with John-son's Baby Pure Mineral Oil - Pink Label.    Pure #5 white oil is the best choice if available.    (This product does not contain oil.
How to Use the Automotive Fuel Smoke Leak Detector?
Notice before Leak Test: Turn OFF the Ignition of Your Vehicle
● Assemble the smoke machine with delivery hose, power socket and hook.
● Unscrew the oil filler cap and add test oil.   (Pure #5 white oil is the best choice if available)
● Disconnect the pipes that need to be connected with the smoke leak detector.
● Connect your car smoke machine’s power cord to 12V vehicle battery (red clip to battery positive and black clip to a good ground, then the Power LED would be ON, if else check the power supply)
● Introduce the smoke delivery hose into the pipeline to be tested via the Adapter Cone.
● Press Air Control Switch, wait for seconds until the system is pressurized, check the Pressure Gauge & Flow Meter reading for leak status.    Turn on the smoke generator, adjust the smoke amount to suitable amount so you can locate the leak position quickly.
● The leak can be judged according to where the smoke appears.
Generic Operation 
1.    Turn OFF the ignition of the vehicle.    LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF.
 2.    Dismantle the air filter and the throttle connections. 
3.    Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake Adapter into the opening. 
4.    Connect the Power Cord to 12V vehicle battery. 
5.    Now the Power LED would be ON, if else check the power supply. 
6.    Introduce the smoke nozzle into the system via the Adapter Cone. 
7.    Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge & Flow Meter.
8.    Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone Adapter when there’s obvious smoke coming out of the smoke nozzle. 
9.    The system will be ready for leak check in 2 minutes.    Use a bright light torch or working lamp to assist. 
10.    After test, press Smoke Control Switch again to stop the unit from generating smoke and press Air Control Switch to stop generating pressurized air. 
11.    Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage.    Hang the unit or make it stand in UPRIGHT position only.    Do NOT lay it down.
Warning 
1.    Only Authorized operator could use this equipment. 
2.    Always confirm Fluid level before use, if the fluid level is low enough to the bottom of the filler port, it will need a refill. 
3.    Do NOT use the unit on smoke sensitive parts.    Eg.    Lamp housing.
4.    Avoid using the equipment on windy environment. 
Safety 
1.    Do not use the equipment while the engine’s running. 
2.    Wear Protection Glass. 
3.    It is always best to test in a draft free area.    Always use a bright halogen lamp to enhance the visibility of the smoke exiting the leak.

 

Package List

•  We accept Credit cards、Debit card、Apple Pay、Google Pay ect. payment .
•  For United Kingdom buyer, VAT already included in the price,no extra fees.
•  Electronic VAT receipt available upon request.
•  If item is shipped from outside of UK, then then import tax NOT included in price.
•  If you accidentally placed the wrong order, please contact us to cancel the order.
About shipping:
UK Order will be shipped within 1 business day after payment confirmed from UK warehouse via Royal Mail 48 track(normally 2-3 working days) or Royal Mail 1st Class(normally 1- 2 working days)with tracking.Note: We will ship according to your EBAY address. Please make sure it' s correct and include phone number for delivery.
About Delivered:
The delevered time is not guaranteed as it's not in our hand. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
About Return:
Returns will be accepted within 30 days after receiving purchasing,All returns are expected to be in original conditions, please email us first for return address and instructions.
1. We are appreciate you to leave Positive Feedback and 5-stars ★★★★★ .It is really important support for us.Thank you.
2.If for any reason you are not satisfy with your purchase, please contact us prior  before ×opening a case× or ×leaving a feedback×, we aim to respond within 24 hours and will do everything to sort problems in your favor.
·We are a professional Authorized dealers of Foxwell, Launch, Ancel, Autophix, Autek,etc.so we can give you professional support.
·We support remote assistance by TeamViewer if you have any difficulty in software installation.
·We promise that we must try our best to make sure every customer 100% satisfied.
·Our items come with warranty and good service.
·We are committed to your satisfaction after your purchase.
·If you are not satisfied with your purchase in any way please message us frist and give us an opportunity to try and make it right befor  ×open a case× or ×leaving a feedback×. We will answer your questions within 1 working days.
·Any questions, Please feel free to contact us via email / ebay message .
·Business time:(GMT8: 9:00 am-6:30 pm,GMT: 2 am-10:30 am ) monday to Saturday.


On Nov 19, 2026 at 11:44:04 GMT, seller added the following information:

Datacaciques