Built specifically for commercial vehicles and heavy-duty mechanics, the MUCAR 563HD is a rugged and reliable diagnostic tablet designed to handle the toughest workshop environments. Whether you are diagnosing a Freightliner, Kenworth, or Volvo, this tool delivers comprehensive system coverage.

Core Features:

• Full Systems Diagnosis: Comprehensive diagnostic coverage for all vehicle modules.

• 8 Reset Services: Includes essential maintenance reset functions.

• CAN FD Protocol: Next-generation protocol support for newer heavy-duty trucks.

• DPF Regeneration: On-board Diesel Particulate Filter regeneration for modern diesel engines.

• Auto VIN Scan: Instantly identifies the vehicle for faster diagnostics.

• 70+ Brands (1996-2026): Extensive coverage for Trucks, Buses, and Diesel Machinery.

• Support 28 Languages: Multi-language interface for global users.

• Lifetime Free Updates: Never pay for software updates again. (Note: Please verify this against your actual warranty policy, as your PPT mentioned 2 years).

• 5" HD Touchscreen: Clear, rugged display for any workshop environment.

• Android 8.1 Operating System : Smooth and stable operating system. 

• 2GB + 64GB Memory: Ample storage and fast processing speed.

• 4-Core CPU, 1.6GHz

Full Systems Diagnosis

• All-Module Scan: Access Engine, ABS, SRS, Transmission, and Body systems in one scan.

• Read/Clear Codes: Instantly read and clear fault codes across the entire truck.

• Live Data & Active Tests: View real-time sensor data and perform active tests to verify component functionality.

8 Maintenance Services (Resets) Explained:

This device is equipped with 8 specialized maintenance reset functions tailored for heavy-duty vehicles, streamlining your service workflow. These typically include:

1. Oil Service Reset
   Resets the vehicle's oil life monitoring system and turns off the maintenance reminder light after an oil and filter change, ensuring the dashboard displays the correct next service interval.
2. DPF Regeneration & Reset
   Triggers a forced regeneration process to burn off accumulated soot inside the Diesel Particulate Filter. Use this when the DPF warning light is on, the truck enters limp mode, or after replacing DPF components.
3. EPB Reset
   Retracts the electronic parking brake calipers into service mode and resets the system afterward. This is essential when replacing rear brake pads or rotors to safely compress the calipers without damaging the electronic motor.
4. SAS Calibration
   Recalibrates the steering angle sensor to establish the exact "straight ahead" position. Required after a wheel alignment, steering component replacement, or when the traction control (ESP/ESC) light stays on due to sensor errors.
5. Injector Coding
   Writes the specific calibration code of a new fuel injector into the engine control unit. Must be performed after replacing one or more injectors to ensure precise fuel delivery and prevent rough idling or misfires.
6. ABS Bleeding
   Cycles the ABS pump and valves to push trapped air out of the ABS module and brake lines. Required after replacing the ABS module, master cylinder, or when air has entered the system, as manual bleeding cannot clear air inside the pump.
7. Throttle Relearn
   Re-educates the ECU on the closed and open positions of the electronic throttle body. Necessary after cleaning the throttle body, replacing it, or disconnecting the battery, preventing rough idling or engine stalling.
8. Battery Registration / Reset
   Informs the vehicle's power management system that a new battery has been installed and updates its data. Required after installing a new battery (especially AGM or EFB types) to prevent overcharging or undercharging, which can shorten the battery's lifespan.

(Note: Specific reset functions may vary depending on the truck's make and ECU. The scanner automatically reads the vehicle's supported functions.)

Advanced Protocols & Smart Features:

• Next-Gen Protocol Support (CAN FD & J1939): Unlike basic scanners, the 563HD fully supports J1939, J1708, and the latest CAN FD (Controller Area Network Flexible Data-rate). This means you can accurately diagnose newer 2019+ heavy-duty trucks and complex diesel engines that require faster data transfer speeds.

Full OBD2 Functions

This device provides comprehensive coverage for standard OBD2 diagnostic functions, ensuring you have all the essential tools for emission testing, engine diagnostics, and basic vehicle health checks.

• Read & Clear DTCs: Instantly read and clear Diagnostic Trouble Codes (DTCs) from the Engine Control Unit (ECU) to turn off the Check Engine Light (MIL).

• Live Data Stream: View real-time engine parameters (such as RPM, coolant temperature, oxygen sensor voltage, and fuel trim) in both text and graph formats.

• I/M Readiness Status: Quickly check if the vehicle's emission systems are ready for state inspection and smog tests.

• Freeze Frame Data: Capture a snapshot of the vehicle's operating conditions at the exact moment a fault code was triggered.

• O2 Sensor Test: Retrieve and view the results of the vehicle's Oxygen Sensor monitoring tests.

• On-Board Monitor Test: Request the results of on-board diagnostic monitoring tests for specific components or systems.

• EVAP System Test: Initiate a leak test for the vehicle's Evaporative Emission Control (EVAP) system.

• Vehicle Information: Retrieve the Vehicle Identification Number (VIN), Calibration IDs, and Calibration Verification Numbers (CVN).

🌐 Comprehensive Protocol Coverage (Including CAN FD)

The MUCAR 563HD is built to handle a wide range of heavy-duty and passenger vehicles, supporting the most advanced and standard diagnostic protocols.

• Next-Gen CAN FD: Fully supports CAN FD (Controller Area Network Flexible Data-rate), enabling fast and accurate communication with newer (typically 2019+) heavy-duty trucks and complex electronic systems. No more "No Communication" errors on the latest models.

• Heavy-Duty Protocols: Supports industry-standard commercial vehicle protocols including J1939 and J1708, ensuring seamless communication with major truck brands like Freightliner, Volvo, and Mack.

• Standard OBD-II Protocols:

  • SAE-J1850 PWM & VPW

  • ISO 9141

  • ISO 14230-2 & ISO 14230-4 KWP

  • ISO 15765-4 CAN

• Universal Compatibility: Whether you are working on a heavy-duty diesel truck, a light commercial vehicle, or a standard passenger car, this device automatically identifies and applies the correct protocol.

🗣️ Support 28 Languages (No Language Barrier)

Designed for global mechanics. The MUCAR 563HD features a user-friendly multi-language interface, eliminating the learning curve for technicians worldwide.

Supported Languages:

English (US), Spanish (ES), French (FR), Italian (IT), Portuguese (PT), Japanese (JP), Russian (RU), Polish (PL), Turkish (TR), Dutch (NL), Hungarian (HU), Chinese (Simplified), Korean (KR), Greek (GR), Slovak (SK), Romanian (RO), Arabic (AR), Croatian (HR), Slovene (SI), Finnish (FI), Czech (CS), Persian (FA), Swedish (SV), Danish (DA), Vietnamese (VI), Serbian (SR), Bulgarian (BG), Chinese (Traditional)

Note: Easily switch languages in the device settings to operate in your native tongue.

Complete Kit Includes:

• MUCAR 563HD Tablet x 1

• Main Diagnostic Cable (DB15) x 1

• OBDI Adapter Cable x 1

• Heavy-Duty Adapters (OBD-9, OBD-6, CAT-9) x 3

• Charging Cable x 1

• User Manual & Waterproof Carrying Case