Adapter lead for matching electric-bike motor and controller wiring. The cable has a red L1121-type 11-pin female screw-lock motor connector at one end, splitting to a yellow three-contact MT60-style phase connector and a white multiway signal connector at the other.
Supplied as one complete cable, exactly as shown in the photographs. The black outer sheath, moulded red-connector boot and separate power/signal ends can be inspected in the gallery.
Check the connector faces and wiring before ordering. The red L1121-type female connector has 3 large power sockets and 8 small signal sockets (11 positions in total), with a screw-lock collar. Matching colours or contact counts alone do not establish compatibility; confirm the phase and signal wiring against your motor and controller.
| End | Configuration shown |
|---|---|
| Motor end | L1121-type 11-pin female screw-lock connector; 3 large power sockets and 8 small signal sockets |
| Phase end | Yellow MT60-style three-contact plug |
| Signal end | White rectangular latching multiway connector |
Suitable where the connector housings and wiring match the existing installation. The red connector is visually identified as L1121-type. Its exact manufacturer and model marking are unconfirmed; genuine Julet manufacture is not claimed. Specific motor models, controller models and connector pin assignments are not claimed.
| Item | Motor wiring adapter cable |
| Condition | New |
| Colour | Black cable; red, yellow and white housings |
| Connectors supplied | 1 red L1121-type female motor end, 1 yellow MT60-style phase end and 1 white signal end |
| Quantity per purchase | 1 complete adapter cable |
The motor, controller, battery, display and mating connector halves are not included.