Pack of 4 black M7 hex-socket stem bolts with washers, intended as replacement fasteners for MTB bicycle stems that match the thread, length and head seating.
The photographed design has a 5mm Allen socket and a visible blue pre-applied thread patch. Overall length is approximately 28mm including the head.
Match your original bolt before ordering. Check thread diameter, pitch, usable length, washer and head seating. MTB stems use different fasteners; this pack is not a universal fit. Overall length includes the head and is not the nominal under-head bolt length.
| Check | Required match |
|---|---|
| Application | MTB bicycle stem fastening points using matching M7 hardware |
| Thread | M7 × 1.0mm pitch (metric coarse) |
| Size and seating | Compare overall length, usable threaded length, head profile and washer with the original fastener |
This listing supplies one 4-bolt pack. M7 × 1.0mm is specified for this design in the supplier details.
| Thread size | M7 |
| Thread pitch | 1.0mm – metric coarse |
| Overall length | Approximately 28mm including head |
| Supplier shank measurement | Approximately 21mm including washer; not a nominal under-head length designation |
| Head diameter | Approximately 9.9mm |
| Hex / Allen drive | 5mm |
| Finish | Black |
| Visible thread treatment | Blue pre-applied patch |
| Pack contents | 4 bolts with washers |
Detail pictures show alternative views of the bolt design. You receive 4 bolts in total. No separate nuts or Allen key are included.