Zenec ZE-RCE3705 E>GO Rear View Camera 

compatible with FIAT Ducato, Citroen Jumper, Peugeot Boxer, 

Opel Movano, Toyota Proace Max

SCOPE OF DELIVERY

Camera ZE-RCE3705

2-piece connection cable (main cable length 11 m)

2 x Stainless steel mounting bolts (71 mm length)

Assembly Instructions

Suitable for the following vehicles:

Fiat Ducato III from 2006 (250, Series 8/9/2)

Citroën Jumper II from 2006 (250, Series 2)

Peugeot Boxer II (250, Series 2)

Opel Movano C from 2021 (250, Series 2)

Toyota Proace Max 2024 onwards

Zenec ZE-RCE3705 E>GO Rear View Camera 

compatible with FIAT Ducato, Citroen Jumper, Peugeot Boxer, 

Opel Movano, Toyota Proace Max

TECHNICAL SPECIFICATIONS

- Camera System: 1/2.9"/8.76mm Silicon Optronics JX-F53 CMOS Sensor

- Focal Length Lens: f 1.6

- TV System: NTSC / 30 fps

- Viewing Angle: 180ø(D) x 160ø(H) x 100ø(V)

- Native Sensor Resolution: 2 Megapixels, 1920(H) x 1080(V) Pixels (1080p)

- Resolution output signal: >420 TV lines

- Refresh Rate: 30 fields/sec

- Signal-to-Noise Ratio: >48dB

- Light Sensitivity: 0.3 Lux

- Video Output: 1.0Vp-p, 75Ohm CVBS

- White Balance: Automatic

- Exposure Compensation: Auto

- Gamma Correction: 0.45

- Brightness Balance: Automatic

- Sync: Automatic

- Power supply: DC 6 - 24 Vv - Power consumption: 70 mA @ 12 V DC, ? 840mW

- Protection Rating: IP69K

- Operating Temperature: -30ø C ~ +75ø C, RH 95% Max.

- Dimensions: 7 x 27 x 6 cm

KEY FEATURES

- Compact high-resolution rear view camera for FIAT Ducato III vehicles and identical types

- System design with integration of the original brake light (ABE/vehicle registration remains)

- High quality Silicon Optronics CMOS image sensor with low power consumption

- Detailed image resolution with high contrast even at dusk

- Mechanically adjustable camera angle to personalize the field of view

- Injection molded plastic main body with stainless steel mounting bolts

- 11m main cable

The ZE-RCE3705 rear view camera for motorhomes and vans simply converts into the original 3rd Brake light integrated: unscrew the reflector housing of the brake light, put on the camera console, connect the cable and reassemble the reflector - done. The existing cable entry in the back panel can be used for the camera cable. An 11 meter long connection cable is included; 

General operating license and vehicle registration remain.

The ZE-RCE3705 is equipped with a high-quality, high-resolution image sensor from Silicon Optronics, which is characterized by low power consumption. The camera delivers a detailed, high-contrast image even at dusk. The large diagonal viewing angle of 180ø allows a wide view behind the vehicle. For optimum adjustment of the field of view 

the camera angle can be adjusted manually.

Thanks to the special camera housing - designed according to protection class IP69K, the highest IP protection class for electrical equipment and housing - the ZE-RCE3705 is optimally protected against dust, water and weather conditions. Due to the wide operating temperature range from -30 øC to +75 øC, the reversing camera offers reliable rear view 

- even in extreme temperature and weather conditions.

The brake light camera can be combined with multimedia systems and navigation devices that have an RCA video signal input (CVBS). The ZE-RCE3705 is compatible with FIAT Ducato III from 2006 (250, Series 8/9/2), Citroën Jumper II from 2006 (250, Series 2), 

Peugeot Boxer II (250, Series 2), Opel Movano C from 2021 (250, Series 2) and Toyota Proace Max from 2024.

Included are the housing console with integrated camera, two stainless steel mounting bolts, a two-piece connection cable with 11-metre main cable, a U-stick for adjusting the camera angle and detailed installation instructions. The original FIAT Ducato brake light reflector shown in the product pictures is for illustration purposes and is not included.