AKAI GX-646 CUSTOM GOLD
Auto-Reverse Reel-to-Reel Tape Deck
Professionally Restored • Custom Gold Finish
Converted for U.S. 120V Operation
2 Gold AKAI Reels + 2 Reel Hubs Included
1-Year HQaudios Technical Warranty
HIGHLIGHTS AT A GLANCE
✓ Professionally restored AKAI GX-646
✓ Custom Gold anodized exterior components
✓ Custom polished stainless-steel side panels
✓ Newly fabricated rear panel
✓ New drive belts
✓ New brake linings / pads
✓ Mechanical and tape transport service
✓ Playback and recording inspection & testing
✓ Converted from original 100V configuration to U.S. 120V
✓ Two matching Gold AKAI reels included
✓ Two reel hubs / adapters included
✓ Multi-stage HQaudios Quality Control
✓ 1-Year HQaudios Technical Warranty
ABOUT THIS AKAI GX-646
Offered by HQaudios, this listing is for the
actual AKAI GX-646 and accessories shown in the photographs.
This GX-646 has undergone an extensive
mechanical, functional, and cosmetic restoration.
The machine was carefully disassembled, serviced, inspected, refinished,
reassembled, and tested through multiple quality-control stages before final approval.
The restoration preserves the iconic design and character of the classic AKAI GX-646
while giving this specific machine a distinctive premium Gold presentation.
COMPLETE GOLD REEL & HUB COMBO
✓ 1 × AKAI GX-646 Reel-to-Reel Tape Deck
✓ 2 × Matching Gold AKAI Reels shown in the photos
✓ 2 × Reel Hubs / Adapters
✓ Actual accessories shown with the machine
✓ 1-Year HQaudios Technical Warranty
This machine is offered as a complete display-and-operation combo,
not simply as a bare tape deck.
TECHNICAL SPECIFICATIONS
|
Track System
|
4-Track, 2-Channel Stereo
|
|
Operation
|
Auto-Reverse Reel-to-Reel Tape Deck
|
|
Reel Capacity
|
Up to 10-inch Reel
|
|
Heads
|
2 × GX Recording Heads
2 × GX Playback Heads
2 × Erase Heads
|
|
Motor System
|
3 Motors Total
1 × AC Servo Capstan Motor
2 × AC Eddy-Current Reel Motors
|
|
Tape Speeds
|
7-1/2 ips (19 cm/s)
3-3/4 ips (9.5 cm/s)
|
|
Wow & Flutter
|
Less than 0.03% WRMS at 7-1/2 ips
Less than 0.04% WRMS at 3-3/4 ips
|
|
Frequency Response
|
25 Hz – 33,000 Hz ±3 dB at 7-1/2 ips (-20 VU)
25 Hz – 26,000 Hz ±3 dB at 7-1/2 ips (0 VU)
25 Hz – 25,000 Hz ±3 dB at 3-3/4 ips (-20 VU)
25 Hz – 15,000 Hz ±3 dB at 3-3/4 ips (0 VU)
|
|
Signal-to-Noise Ratio
|
Better than 65 dB at 7-1/2 ips
|
|
Harmonic Distortion
|
Less than 0.4% at 7-1/2 ips
|
|
Microphone Input
|
0.25 mV / 5 kΩ
|
|
Line Input
|
70 mV / 100 kΩ
|
|
Line Output
|
0.775 V at 0 VU
|
|
Dimensions
|
17.3 W × 19.0 H × 10.1 D inches
440 × 483 × 256 mm
|
|
Unit Weight
|
Approx. 46.4 lbs / 21 kg
|
|
Power – This Unit
|
Professionally converted for U.S. 120V operation
|
CUSTOM COSMETIC RESTORATION
• The aluminum faceplate, head cover, control knobs, and related exterior components
were completely removed for restoration.
• Existing scratches and surface imperfections were carefully treated.
• Restored aluminum components were professionally
anodized in a coordinated Gold finish.
• Painted surfaces were redesigned and refinished to complement the overall custom appearance.
• The original wooden side panels were replaced with
custom polished stainless-steel side panels.
• The rear panel was replaced with a newly fabricated panel made from the correct type of board
imported from the United States.
• All screws and mounting hardware were individually inspected.
• Original screws that remained in good condition were thoroughly cleaned and reused.
• Screws that did not meet our quality requirements were replaced.
• Exterior surfaces, controls, lettering, trim, hardware, and visible details
were carefully cleaned and inspected before final assembly.
IMPORTANT CUSTOM FINISH DISCLOSURE
The Gold anodized finish, refinished exterior surfaces, and polished stainless-steel
side panels are part of a professional custom restoration.
They are not the original factory cosmetic finish,
and this machine is not represented as a factory-produced AKAI Gold Limited Edition.
MECHANICAL SERVICE
The tape transport and mechanical systems were inspected and serviced as part of the restoration.
✓ Inspection, servicing, and adjustment of the mechanical system
✓ Replacement of the drive belts
✓ Replacement of the brake linings / brake pads
✓ Inspection and servicing of the reel transport system
✓ Inspection and servicing of the braking mechanisms
✓ Functional testing of primary transport controls
✓ Functional testing of moving mechanical assemblies
PLAYBACK & RECORDING SERVICE
✓ Playback section inspected and serviced
✓ Playback operation functionally tested
✓ Recording section inspected and serviced
✓ Recording operation functionally tested
✓ Play and Record functions checked during final evaluation
✓ Machine tested through its operating modes before final approval
CONVERTED FOR U.S. 120V OPERATION
This specific machine was originally configured for
100V operation.
Its power system has been professionally converted for
U.S. 120V operation.
No external 100V step-down transformer is required for normal operation
from a standard U.S. 120V power supply.
MULTI-STAGE HQAUDIOS QUALITY CONTROL
Each major stage of the restoration and preparation process is checked by
the appropriate HQaudios team.
1. Mechanical Repair & Functional QC
Mechanical servicing, tape transport, controls, and moving assemblies are inspected after repair.
2. Playback & Recording QC
Playback and recording functions are checked before approval.
3. Cosmetic Restoration QC
Custom finish, exterior components, hardware, controls, and overall presentation are inspected.
4. Media & Photography QC
The machine is reviewed again during preparation of the actual photographs and media used for this listing.
5. Final Inspection Before Packing
The machine, accessories, and order details are verified before packing.
6. Packaging QC
Packaging is checked before shipment to help reduce the risk of transportation damage.
ACTUAL UNIT SHOWN
The photographs in this listing show the
actual AKAI GX-646 being offered for sale.
Please inspect all photos carefully. They form an important part of the description
and show the actual machine, Gold finish, stainless-steel side panels, controls,
rear panel, Gold AKAI reels, reel hubs/adapters, cosmetic condition,
and accessories included with this sale.
IMPORTANT CONDITION INFORMATION
This is a
professionally restored vintage machine with a custom cosmetic finish.
It is not represented as untouched, unused, or cosmetically factory-original.
Because this is genuine vintage equipment, minor evidence of age, previous use,
handling, or restoration may remain even after restoration.
Please use the listing photographs as the final visual reference for
the exact cosmetic condition of this specific unit.
1-YEAR HQAUDIOS TECHNICAL WARRANTY
This AKAI GX-646 is backed by our
1-Year HQaudios Technical Warranty.
HQaudios specializes in professionally prepared vintage audio equipment,
with an emphasis on restoration, functional testing, quality control,
careful packaging, and after-sale technical support.
PROFESSIONAL PACKAGING
Reel-to-reel tape decks are heavy, mechanically complex, and sensitive to
impact during transportation.
This GX-646 will therefore be carefully packed using protective materials
appropriate for its size, weight, and mechanical construction.
Removable accessories such as the Gold reels and reel hubs/adapters
will be protected and secured appropriately for shipment.
HQAUDIOS RESTORATION SUMMARY
✓ Professionally Restored
✓ Custom Gold Anodized Finish
✓ Polished Stainless-Steel Side Panels
✓ Newly Fabricated Rear Panel
✓ New Drive Belts
✓ New Brake Linings / Pads
✓ Mechanical & Tape Transport Service
✓ Playback & Recording Service
✓ 3-Motor / 6-Head GX Design
✓ Two Tape Speeds: 7-1/2 & 3-3/4 ips
✓ Converted for U.S. 120V Operation
✓ 2 Matching Gold AKAI Reels Included
✓ 2 Reel Hubs / Adapters Included
✓ Multi-Stage HQaudios QC
✓ 1-Year HQaudios Technical Warranty
WHAT YOU SEE IS WHAT YOU RECEIVE
This sale includes the actual complete AKAI GX-646 combo shown in the photographs:
the restored tape deck, two matching Gold AKAI reels,
two reel hubs/adapters, and the accessories pictured with this specific machine.