6 LED Dental Operating Lamp Sensor Manual Switch 12V For Dental Chair
Dental Operating Lamp with Inductive & Manual Switch Control
Designed for stable lighting control and easy installation, this dental operating lamp features sensor control, manual switch support, and an adjustable arm structure. Note: It needs to be used with a transformer to convert the voltage to 12V. ⚙️
Key Features
- LED 6-Bead Sensor: Built with 6 LED beads for practical lighting performance.
- Dual Control Options: Supports inductive switch and manual switch control.
- Easy Installation: Comes with a 2-wire connector for straightforward setup.
- Adjustable Structure: The operating lamp has three movable joints to adjust the angle of use.
- Removable Handle: The handle includes a button and can be removed for sterilization.
- Light Output Range: Strong light-gathering ability with strong and weak light modes.
The sensor can be controlled by moving your hand close to about 50–120MM, making operation simple and convenient. ✨
Specifications
| Power | 8W |
| Input Voltage | 12VAC ±20﹪ |
| Frequency | 50/60Hz |
| Lamp Weight | 2kg |
| Rated Current | 800mA |
| Illumination | 8000–30000LUX |
| Color Temperature | 6000°K |
| Spot Size | 70 × 140MM (distance 700MM) |
| Control Method | Inductive switch and manual switch |
Environmental Requirements
| Storage & Transportation Temperature | -20℃ to 70℃ |
| Storage & Transportation Relative Humidity | 10﹪ to 90﹪ |
| Use Temperature | 5℃ to 40℃ |
| Use Relative Humidity | 30﹪ to 80﹪ |
| Atmospheric Pressure | 500–1060hpa |
Operation & Control
- The operating lamp has three movable joints to adjust the angle of use.
- The handle of the dental lamp can change angle according to user requirements.
- When your hand approaches the sensor to about 50–120MM, the lamp can be turned on or off.
Care & Maintenance
- The translucent cover can be wiped with lens paper.
- The housing and handle can be cleaned with a neutral cleaning solution.
- After cleaning, the housing and handle can be wiped and disinfected with alcohol or disinfectant.
Installation Method
Connect the dental lamp connection plug and the lamp arm connection plug, then tighten the dental lamp and the lamp arm with M6 screws. After that, connect the lamp arm to the AC12V power supply of the dental chair control board.
Important Notes
- Voltage Note: Use with a transformer to convert the voltage to 12V.
- Please refer to the listed specifications before purchase.
- Size and technical information are based on the original listing.
If this model matches your setup, this listing provides the key details you need for a clear and informed purchase. 😊
Shipping:
2-9 working days to: USA
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Nov 1, 2026 at 22:24:08 PST, seller added the following information: