1. Oil Reset
Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.EPB Electronic Park Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.

3.BAT battery service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

4.DPF Diesel Particulate Filter Reset
Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.SAS Steering Angel Sensor Reset
Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

6.TPMS Tire Pressure Monitoring System Reset
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Matching
In order to prevent the car from being used by illegal keys, the IMMO matching function enables the anti-theft control system on the car to identify and authorize the remote key, so that the car can be opened and used normally. When the car changes the ignition switch key,ignition switch, integrated dashboard, engine control unit (ECU), body control module (BCM) and remote control battery, the IMMO matching is required.

8.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset
Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

11.Gearbox (Transmission )Reset
Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

12.AFS Headlamp Reset
'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation
The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

15.Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

16.EGR Reset
Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

19.Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.

21.AT Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

22.Language Change
This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

24.ODO Meter Check:
Only supports reading the current mileage of the car, does not support modifying the mileage
Copy, write or rewrite the kilometer value. This feature is available for limited cars, including Chrysler 200 after 2010, Chrylser 300C before 2010, Chrylser Aspen after 2006, Chrysler Avenger after 2007, Chrysler Caliber after 2006, Chrysler Caravan after 2012, Chrysler Charger after 2004, Chrysler Durango after 2007, Chrysler Journey after 2008, Chrysler Liberty after 2008, Chrysler Magnum after 2004, Chrysler New Sebring after 2007, Chrysler Ram after 2006, Chrysler Voyager after 2015, Buick Enclave 2007-2013, Chevrolet Equinox 2008-2009, Pontiac Torrent 2007-2013, Saturn Outlook 2007, Nissan Datsun 2016-2018, VW Golf 2009-2014, VW Passat 2011-2018, VW Polo GTI 2012-2015, VW Tiguan 2009-2015.

25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key,etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

⚠️NOTE: List varies by vehicle's make, model, and year. NOT All Services work for All Cars. Please remember to contact sellers before buying to make sure the desired functions are compatible with your cars, which won't waste your time.

Bi-directional Control Test as a commonly-used function for mechanic/workshop, can save you a loads of time and money as it sends a command to vehicle ECU to perform component test for checking actuator's working status to quickly pinpoint problem parts without disassembling the vehicle, like testing A/C Clutch, Fuel Injectors, ABS Pump Motor, Cooling Fan, Solenoid Valves, Relays, Interior Lighting, Window, Door, Sunroof, Car Wipers, and etc.

✔ Fuel Pressure Control Valve, Fuel Trim Enable, Fuel Injector Tests, Injector Buzz Test
✔ Cylinder Deactivation, A/C Compressor Clutch Relay On/Off, Cycling ABS Pump Motor
✔ Rolling Up/down Car Windows/Doors/Sunroof
✔ Cooling Fan Motor Command, Interior Lighting Test, High Beam Test
✔ EVAP Tests: EVAP Purge Solenoid Valve, EVAP Vent Solenoid Valve, EVAP Purge/Seal

Supported 28 language:

English, German, Spanish, French, Italian, Portuguese, Russian, Polish, Turkish, Dutch, Hungarian, Chinese (Traditional), Greek, Slovak, Romanian, Arabic, Croatian, Slovene, Finnish, Japanese, Korean, Czech, Persian, Swedish, Serbian, Danish, Vietnamese , Bulgarian

Supporting CANFD

The ultimate diagnostic tool supports a wide range of crucial protocols, including CANFD—now supporting for SGM, for GM, for CHRYSLER.

[2021][Chevrolet][Onix]
CANFD6&14,[Chevrolet][Tracker] CANFD6&14,[Chevrolet][Suburban]
CCMA,[Cadillac][Escalade ESV] CCMA,[Cadillac][Escalade] CCMA,[GMC][YUKON XL]
CCMA,[GMC][YUKON] CCMA,[Chevrolet][Onix] ALL SYSTEM,[Chevrolet][Tracker] ALL
SYSTEM,[Chevrolet][Suburban] CCMA,[Cadillac][Escalade ESV]
CCMA,[Cadillac][Escalade] CCMA,[GMC][YUKON XL] CCMA,[GMC][YUKON] CCMA

[2023][Chevrolet][Montana] ALL
SYSTEM,[Chevrolet][Montana] CANFD6&14

[2024][Buick][Electra E5]
VSIM,[GMC][Sierra] H/U TCM 10 Speed (MGM)/10 Speed (MGU),[Buick][Electra E5]VSIM,[GMC][Sierra] H/U TCM 10 Speed
(MGM)/10 Speed (MGU)

Built-in Full OBDII Special Services(LIFETIME FREE):

Read Codes—Knows what and where the problem is according to the DTC and its definition.
Clear Codes—Clear the DTCs and turn off the warning lights after code reading and certain repairs.
Live Data---Request current powertrain diagnostic data. 4 data streams can be merged in 1 graph for easier comparison.
Freeze Frame—Request freeze frame information. Find the data at the time of the car failure.
O2 Sensor Test—Request oxygen sensor monitoring test results.
On-Board Monitor Test—Request on-board monitoring test results for specific monitored systems.
I/M Readiness—Request emission-related diagnostic trouble codes detected during current or last completed driving cycle
EVAP Test—Start the leak test of the vehicle's EVAP system (This tool does not perform the leak test, but sends a signal to the vehicle's on-board computer to start the test.)
Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.