Features & Benefits:

• Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance
• A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum airflow
• The high and low integrated throttle position sensors are tested to match OE characteristics throughout the entire operational range
• Final assemblies are tested for all critical functions, including response time and airflow at multiple points
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit

Common Symptoms

• Delayed or no throttle response
• Throttle position sensors codes stored
• Consistent reduced engine power
• Intermittent reduced engine power
• Low idle RPM
• Idle RPM hunt or erratic idle
• Erratic transmission shift points
• Engine surges
• Engine intermittent start then stall
• Hesitation

Installation Tips

Refer to an authorized original equipment service manual for detailed installation instructions. If you do not have the experience, proper tools or manuals, please seek the services of a qualified technician

• Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
  • A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
  • Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
  • Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn again if a drivability condition is present.
• Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
• Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
• Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
• Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.