Product Description

6 Pin Male to 3X 15 Pin SATA Power Cable for Corsair Modular PSU – 18AWG Hard Drive Power Adapter Splitter, 50cm+15cm+15cm+15cm

Need more SATA power connectors for your Corsair modular power supply? The 6 Pin Male to 3X 15 Pin SATA Power Cable provides a convenient solution for adding three extra 15-pin SATA connectors to your compatible Corsair Type 3 or Type 4 modular PSU. Designed for Corsair RM/RMX/RMi, HX/HXi, CX/CX-M, CS/CS-M, SF, TX/TX-M, and AXi/AX series power supplies, this high-quality 18AWG cable delivers reliable 12V/5V power to your hard drives, SSDs, and SATA peripherals.

What’s Included：

  • 1x 6 Pin Male to 3X 15 Pin SATA Power Cable (50cm+15cm+15cm+15cm, 18AWG)

What’s NOT Included：

  • Power supply or hard drives
  • Adapters for other connector types

CRITICAL – Read Before Ordering This cable is ONLY compatible with specific Corsair Type 3 and Type 4 modular power supplies. Using it with an incompatible PSU can damage your components.

Compatible Power Supplies（Corsair Type 3 & Type 4）：

RM Series RM, RMX, RMi (2019 and newer)
HX Series HX, HXi
CX Series CX, CX-M
CS Series CS, CS-M
SF Series SF (excluding SF-L)
TX Series TX, TX-M
AX Series AXi, AX (Titanium/Platinum) NOT AX1200, AX750, AX850

NOT Compatible With：

  • Corsair Type 5 PSUs – RMx Shift, SF-L, HXi Shift, SF850, SF1000-
  • Corsair AX1200, AX750, AX850
  • Corsair non-modular or semi-modular power supplies
  • Non-Corsair PSUs – This cable is not cross-compatible with other brands

Connector Type Verification：

  • The 6-pin male end connects to your PSU’s peripheral 6-pin port – NOT a PCIe 6-pin port or CPU 8-pin header.
  • The three 15-pin SATA female ends connect to your hard drives, SSDs, or other SATA devices.
  • The cable is directional – the 6-pin end and the SATA ends cannot be used interchangeably.

Technical Specifications：

Cable Type 6 Pin Male to 3X 15 Pin SATA Female
Length 50cm + 15cm + 15cm + 15cm
Wire Gauge 18AWG Tinned Copper
Connectors 1x 6 Pin Peripheral Male, 3x 15 Pin SATA Female
Material UL1007 18AWG tinned copper wire
Compatibility Corsair Type 3 & Type 4 Modular PSUs (see list above)

Installation Guide：

  1. Verify Compatibility – Check that your Corsair PSU is Type 3 or Type 4.
  2. Power Down – Turn off your PC and unplug the power cord.
  3. Connect to PSU – Plug the 6-pin male end into your PSU’s peripheral 6-pin port. This port is typically labeled “Perif” or “6-Pin Peripheral” on Corsair modular power supplies.
  4. Connect to Devices – Plug the three 15-pin SATA female ends into your hard drives, SSDs, or SATA peripherals.
  5. Secure & Test – Ensure all connections are secure. Power on and test.

Important Notes：

  • Connector Compatibility: This cable uses a 6-pin peripheral connector on the PSU end and 15-pin SATA connectors on the device end. It is NOT a PCIe or CPU cable.
  • PSU Port Verification: The 6-pin port on your PSU must be a peripheral/SATA port, not a PCIe port. These ports are physically different and not interchangeable. Check the labeling on your PSU.
  • Cable Direction: The 6-pin end must connect to the PSU. The three 15-pin SATA ends must connect to your devices.
  • Load Recommendation: Connect no more than 2x 3.5" HDDs, or up to 3x SSDs / 2.5" HDDs. SATA connectors are rated at 4.5A per rail (12V / 5V)-. Do not exceed the safe current limit of your PSU peripheral port.
  • Not recommended for mining.
  • Type 3/Type 4/Type 5 Clarification: Corsair Type 3 and Type 4 cables share the same SATA/PATA/Peripheral pinout; the only difference is the 24-pin ATX cable-1. Type 3/Type 4 cables are NOT compatible with Type 5 power supplies-1. Never mix cables from different Corsair PSU generations without verifying compatibility.