KZYEE KM05 Powerscan Circuit Tester Electrical Power 12V-24V Probe Diagnostic
KEYEE KM05 Features: 1.[AC & DC Voltage Detection Mode]: AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test. While DC volt. detection detects the voltage value of the circuit under test. 2.[Resistance Test & Diode Test Mode]: It detects the resistance between the circuit probe under test and the auxiliary ground; While Diode Test can quickly test the operation of the diode assembly and determines if it is conducting. 3.[Current Overload Protection]: When the current overload, KEYEE KM05 Automotive Circuit Tester will automatically disconnect the protection circuit to reduce unnecessary losses.
KEYEE KM05 Electrical System Circuit Tester Functions: 1. Power injection, measuring, ground testing, polarity checking, continuity testing and component activation. 2. Read the AVO meter, voltage, current, and resistance. 3. Energize the electrical components, such as the cooling fan, relay etc. 4. Activate the components 5. Determine the positive, negative and open circuit. 6. Test the bad ground contacts, follow and locate short circuits without wasting the fuse. 7. Test the continuity of the power switch, relay and diode. 8. Protect the tool from overload. 9. Allow you to work in the dark area by using the built-in head light.
Operating Instructions (Partial operating instructions, please refer to the manual for details): 👍 Quick Self-Test Before you test a circuit or component, be sure your tool is in good order by doing a quick self-test. With the tool connected, perform a quick self-test. The power switch is a momentary rocker switch located on the tool’s body. Flanking the switch are positive and negative markings. Press the Power Switch forward to activate the tip with a positive voltage. The Red LED should light and LCD display will read the battery voltage. A beep tone will sound. Let go of the power switch and the LED will turn off and the tone will cease. Press the Power Switch rearward to activate the tip with a negative voltage. The Green LED should light and the LCD display will read the 0.0V (ground). A beep tone will sound. Let go of the power switch and the LED will turn off and the tone will cease. Your tool is working correctly and is now ready for use. 👍Voltage & Polarity Testing: While the tool is in DC Voltage mode, contact the probe tip to a POSITIVE circuit. The red LED will light and the LCD displays the voltage with a resolution of 0.1V. A beep tone will sound. If contact the probe tip to a NEGATIVE circuit, the green LED will light and the LCD displays the voltage with a resolution of 0.1V. A beep tone will sound. If contact the probe tip to an OPEN circuit, neither of the LED will light. 👍Continuity Testing: While the tool is in Resistance mode, using the probe tip with chass is ground or the auxiliary ground lead, continuity can be tested on wires and components attached or disconnected from the vehicle’s electrical system. When the probe tip is contacting a good ground, the LCD will indicate “0.0Ω” and green LED will be on. A beep tone will sound.In other cases, the LCD only indicates the resistance value. If the resistance value is greater than 100KΩ, the LCD will show “0L”. There is also another way to prove continuity of connections to ground or battery. Power up the connection using the power switch. If the circuit breaker trips you know that you have a good solid low resistance connection. Note: You can use the probe tip to pierce the plastic insulation on a wire. This means that you can test the circuit without disconnecting anything. 👍Signal Circuit Testing: Once you extract a DTC from the vehicle and realize that troubleshooting begins with some kind of sensor circuit, there is a quick test you can perform to verify the code. Testing your sensor is easy while using the tool. For example, you suspect there is a problem with your M.A.P.? sensor circuit, then follow the procedure involved with testing this sensor: ◆ Set the tool in AC Voltage mode, using the probe tip with chassis ground or the auxiliary ground lead. ◆ Connect vacuum pump to MAP sensor. ◆ Contact the probe tip to the MAP sensor positive terminal and observe the LCD readings which should be a sine wave in normal condition. ◆ Apply vacuum. ◆ Release vacuum and observe the LCD readings.
Specifications: Display:1.77 inch TFT (160*128 DPI) Supply Voltage:DC: 8V~35V Operating Temperature:-20℃ (-4℉) to 50℃ (122℉) Storage Temperature:-40℃ (-40℉) to 65℃ (149℉) External Power:12 or 24 V power provided via vehicle battery Dimensions (L*W*H):225*45*35mm
Parts List: Description X 1 User’s Manual X 1 Vehicle Super Probe X 1 Probe tip X 1 Carton X 1
◆ Important Safety Information To prevent personal injury or damage to vehicles and/or the test tool, read this instruction manual first and observe the following safety precautions at a minimum whenever working on a vehicle: ◆ Always perform automotive testing in a safe environment. ◆ Wear safety eye protection that meets ANSI standards. ◆ Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts. ◆ Operate the vehicle in a well ventilated work area: Exhaust gases are poisonous. ◆ Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests. ◆Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These components create hazardous voltages when the engine is running. ◆Put the transmission in PARK ( for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged. ◆ Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires nearby. ◆ Don’t connect or disconnect any test equipment while the ignition is on or the engine is running. ◆ Keep the tool dry, clean, free from oil/ water or grease. Use a mild detergent on a clean cloth to clean the outside of the test tool, when necessary. ◆When the power switch in the tool is depressed battery current/voltage is conducted directly to the tip which may cause sparks when contacting ground or certain circuits. Therefore the tool should NOT be used around flammables such as gasoline or its vapors. The spark of an energized tool could ignite these vapors. Use the same caution as you would when using an arc welder.
• We accept Credit cards、Debit card、Apple Pay、Google Pay ect. payment . • For United Kingdom buyer, VAT already included in the price,no extra fees. • Electronic VAT receipt available upon request. • If item is shipped from outside of UK, then then import tax NOT included in price. • If you accidentally placed the wrong order, please contact us to cancel the order.
About shipping: UK Order will be shipped within 1 business day after payment confirmed from UK warehouse via Royal Mail 48 track(normally 2-3 working days) or Royal Mail 1st Class(normally 1- 2 working days)with tracking.Note: We will ship according to your EBAY address. Please make sure it' s correct and include phone number for delivery. About Delivered: The delevered time is not guaranteed as it's not in our hand. If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated! About Return: Returns will be accepted within 30 days after receiving purchasing,All returns are expected to be in original conditions, please email us first for return address and instructions.
1. We are appreciate you to leave Positive Feedback and 5-stars ★★★★★ .It is really important support for us.Thank you.
2.If for any reason you are not satisfy with your purchase, please contact us prior before ×opening a case× or ×leaving a feedback×, we aim to respond within 24 hours and will do everything to sort problems in your favor.
·We are a professional Authorized dealers of Foxwell, Launch, Ancel, Autophix, Autek,etc.so we can give you professional support. ·We support remote assistance by TeamViewer if you have any difficulty in software installation. ·We promise that we must try our best to make sure every customer 100% satisfied. ·Our items come with warranty and good service.
·We are committed to your satisfaction after your purchase.
·If you are not satisfied with your purchase in any way please message us frist and give us an opportunity to try and make it right befor ×open a case× or ×leaving a feedback×. We will answer your questions within 1 working days. ·Any questions, Please feel free to contact us via email / ebay message . ·Business time:(GMT8: 9:00 am-6:30 pm,GMT: 2 am-10:30 am ) monday to Saturday.
On Oct 15, 2026 at 12:24:43 BST, seller added the following information: