15M Misting Cooling System W/Pump -Garden Greenhouse Nozzle Irrigation Spray Kit



Features:
Perfect for cooling your outdoor living areas. Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog.  No air assistance is required, the system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and fine effect.

Scope of application: Wetting and descaling, air humidification, chemical treatments, chemical spraying, liquid spraying, tobacco leaf humidification, tablet coating, flue gas evaporative cooling, sterilization, component cooling, fruit spray Wax, tile glazing, plant humidification, salt spray test, artificial fog, humidification in other places, etc.


Specifications:
Sprayer Type: Pump
Type: Sprayers
Material: Plastic (ABS)
Product Name: 12V water pump misting kit
Nozzle Size: 0.4mm
Function: Humidity, Stop dust, Cooling, Landscaping
Application: Cooling, Humidification and Garden Micro irrigation
Hose Material: Food Grade PE
Pump Liter: 5L/min
Power: 12V 60W
Structure: Diaphragm Pump
Working Pressure: 115psi/0.8mpa


Package Includes:
1 x Pump
1 x Power supply
3M water house
12M misting line
21 x Mist nozzles
2 x White female connector
1 x End plug
1 x Inlet filter head
50 Saddle clamps(About)
50 cable ties(About)
1 x Seal tape


Installation steps: 

1, it is recommended to install the atomization system at a height of 2.5m-3m.

2. Connect the adapter to the faucet.

3, open the faucet cleaning system for 1 minute to clean the system and remove impurities.

4. Screw the spray nozzle onto the tee fitting, except for the very end nozzle.

5. Turn on the faucet cleaning system for 2 minutes to ensure that the system is completely cleaned.

6.Turn off the water and attach the last nozzle to the joint and use the end plug.

7. Fix the atomization pipe through the saddle-shaped clip of the cable tie provided.

8. Turn on the faucet until the sprayer is working and enjoy the cooling atomization system.

9, when the atomization system is not used for a long time, close the nozzle and keep it dry and clean.

Note:Water leakage proof tape is recommended if found anywhere with water leaking.



Installation steps:
1.   Take the 3M water hose and water inlet filter and put the filter into the water tank totaly .
2.   Fit Misting Nozzles and end plug with Nozzle Fittings.
3.   Take the black pump,Connecting one side with 3M water inlet and another side with 12M misting system.
4.   Connect power adapter with pump and turn on the power to operate the system for 1 Minute to discharge the air in.
5.   Check the whole system carefully to ensure there is no water leakage after the system start to work.
6.   Fix the misting lines by the cable ties and saddie clamps provided.
7.  Turn on the power and then enjoy the misting cooling system.



  • All payment method allowed use by eBay manage payment.
  • Buyers are required to carefully follow payment instructions on the checkout page, and note down any necessary details on it (e.g. bank account details). 

  • If buyers fail to follow the instructions on the checkout page, We are not liable for any unidentified payments and subsequent delivery delays. 
                                                                                                   




  • Shipment is within UK. 
  • Items are generally dispatched within 1 working day after payment is clear.
  • Buyers will also be able to trace deliveries online with a unique tracking number. While we endeavor to send all our items with tracking numbers, there may be a few smaller items that are not sent with a tracking number. 
  • Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
  • Re-delivery fee may be charged to buyers for items that are undelivered and/or returned to us due to incorrect delivery address or unsuccessful deliveries. 
  • Items will only be delivered during normal working hours (9am to 5pm on weekdays. Delivery is not available on weekends, public holidays or after business hours.



  • If it is the buyer's personal reason to return the item, the return postage fee would be at buyer's charge. 
  • Returns must be agreed by both parties prior to the actual return with 30 business days. 
  • Buyers must also strictly follow our returns procedure when returning an item. 
  • We reserves the rights to provide buyers a replacement, parts or a full or partial refund. Charges may apply if the product is damaged by buyers when the returned item is received. 
  • Should you change your mind and wish to return your item, this can be done if you notify us within 30 days of receiving your item. 



  • We have two or more warehouses that are all located in UK.
  • If any questions, please contact us freely, we will response within 24-48 hours.
  • If there is anything wrong with the order, please do not hesistate to contact us. We are sure we will try hard to help till you are satisfied!
 
Features:
Perfect for cooling your outdoor living areas. Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog.  No air assistance is required, the system is simple, the spray point is fine, the atomization is sufficient, energy and water saving, low cost and fine effect.

Scope of application: Wetting and descaling, air humidification, chemical treatments, chemical spraying, liquid spraying, tobacco leaf humidification, tablet coating, flue gas evaporative cooling, sterilization, component cooling, fruit spray Wax, tile glazing, plant humidification, salt spray test, artificial fog, humidification in other places, etc.


Specifications:
Sprayer Type: Pump
Type: Sprayers
Material: Plastic (ABS)
Product Name: 12V water pump misting kit
Nozzle Size: 0.4mm
Function: Humidity, Stop dust, Cooling, Landscaping
Application: Cooling, Humidification and Garden Micro irrigation
Hose Material: Food Grade PE
Pump Liter: 5L/min
Power: 12V 60W
Structure: Diaphragm Pump
Working Pressure: 115psi/0.8mpa


Package Includes:
1 x Pump
1 x Power supply
3M water house
12M misting line
21 x Mist nozzles
2 x White female connector
1 x End plug
1 x Inlet filter head
50 Saddle clamps(About)
50 cable ties(About)
1 x Seal tape


Installation steps: 

1, it is recommended to install the atomization system at a height of 2.5m-3m.

2. Connect the adapter to the faucet.

3, open the faucet cleaning system for 1 minute to clean the system and remove impurities.

4. Screw the spray nozzle onto the tee fitting, except for the very end nozzle.

5. Turn on the faucet cleaning system for 2 minutes to ensure that the system is completely cleaned.

6.Turn off the water and attach the last nozzle to the joint and use the end plug.

7. Fix the atomization pipe through the saddle-shaped clip of the cable tie provided.

8. Turn on the faucet until the sprayer is working and enjoy the cooling atomization system.

9, when the atomization system is not used for a long time, close the nozzle and keep it dry and clean.

Note:Water leakage proof tape is recommended if found anywhere with water leaking.



Installation steps:
1.   Take the 3M water hose and water inlet filter and put the filter into the water tank totaly .
2.   Fit Misting Nozzles and end plug with Nozzle Fittings.
3.   Take the black pump,Connecting one side with 3M water inlet and another side with 12M misting system.
4.   Connect power adapter with pump and turn on the power to operate the system for 1 Minute to discharge the air in.
5.   Check the whole system carefully to ensure there is no water leakage after the system start to work.
6.   Fix the misting lines by the cable ties and saddie clamps provided.
7.  Turn on the power and then enjoy the misting cooling system.
PAYMENT
  • All payment method allowed use by eBay manage payment.
  • Buyers are required to carefully follow payment instructions on the checkout page, and note down any necessary details on it (e.g. bank account details). 

  • If buyers fail to follow the instructions on the checkout page, We are not liable for any unidentified payments and subsequent delivery delays. 
                                                                                                   


SHIPPING
  • Shipment is within UK. 
  • Items are generally dispatched within 1 working day after payment is clear.
  • Buyers will also be able to trace deliveries online with a unique tracking number. While we endeavor to send all our items with tracking numbers, there may be a few smaller items that are not sent with a tracking number. 
  • Buyers have full responsibility to provide us with the correct delivery address on the checkout page before payment is made.
  • Re-delivery fee may be charged to buyers for items that are undelivered and/or returned to us due to incorrect delivery address or unsuccessful deliveries. 
  • Items will only be delivered during normal working hours (9am to 5pm on weekdays. Delivery is not available on weekends, public holidays or after business hours.

Terms of Sale
  • If it is the buyer's personal reason to return the item, the return postage fee would be at buyer's charge. 
  • Returns must be agreed by both parties prior to the actual return with 30 business days. 
  • Buyers must also strictly follow our returns procedure when returning an item. 
  • We reserves the rights to provide buyers a replacement, parts or a full or partial refund. Charges may apply if the product is damaged by buyers when the returned item is received. 
  • Should you change your mind and wish to return your item, this can be done if you notify us within 30 days of receiving your item. 

ABOUT US
  • We have two or more warehouses that are all located in UK.
  • If any questions, please contact us freely, we will response within 24-48 hours.
  • If there is anything wrong with the order, please do not hesistate to contact us. We are sure we will try hard to help till you are satisfied!