Opened never used - Box bit tatty.

About this item

USB C Switch for 2 Computers: Share one compatible USB-C monitor, Thunderbolt 4 monitor, USB4 dock or Thunderbolt 4 docking station between two laptops. Connect the attached output cable to the shared monitor or dock, then use the two included USB4 host cables to connect the laptops
20Gbps USB-C Connection: The USB C sharing switch provides overall connection bandwidth up to 20Gbps for video, data and peripherals connected through the shared monitor or docking station. Actual performance depends on the computers, shared device, peripherals and included cables
High-Resolution Monitor Support: Use this USB C monitor switch with one compatible USB-C or Thunderbolt 4 monitor at up to 8K@30Hz or 4K@144Hz on Windows and up to 4K@60Hz on macOS. Available resolution and refresh rate depend on the computer, graphics hardware, display and connection configuration
Share a USB4 or Thunderbolt 4 Dock: Switch a compatible docking station and its connected display and USB peripherals between two computers. Windows multi-monitor output requires a compatible computer and MST-enabled dock. macOS supports one external display through this USB-C switch

Product Description

Acer	Nitro XV275K P3biipruzx, Nitro XV282K KVbmiipruzx, SH272U Ebmiphux
ASUS	ProArt PA278CV, ProArt PA279CRV, ProArt PA34VC
BenQ	PD3220U, PD3225U, PD3420Q, SW271C PhotoVue
Dell	S2722QC, UltraSharp U2720Q, UltraSharp U2723QE, UltraSharp U3224KB, UltraSharp U3425WE, UltraSharp U4025QW
HP	E27m G4 QHD USB-C Conferencing Monitor, Z32k G3 4K USB-C Monitor, Z43 42.5-inch 4K UHD Display
Lenovo	ThinkVision P27h-20, ThinkVision P34w-20, ThinkVision T32p-20
LG	27UN850-W, 32UN880-B
Samsung	CJ791, S60UA, S80UA, ViewFinity S80PB
*Important	When using the USB-C switch to a Thunderbolt 3 dock, it will support only ONE display with a max resolution of 4K@60Hz.
Note#1	We do not recommend using a USB-C coupler to connect the switch to a USB-C hub or docking station with an integrated pigtail cable.
Note#2	Do not use Thunderbolt 3/4/5 cables for connection. Only use the included USB4 cables to avoid compatibility issues.
Note#3	The switch is designed to connect to a single monitor with a USB-C input. For multi-monitor setups or monitors with DisplayPort / HDMI inputs, a USB-C docking station is required.
Note#4	The remote control is pre-paired with the switch. To pair a new remote, connect the switch to the computer, then press and hold the Pair button for 5s until the LED stops flashing.