Product Features
-
Complete Sensor & Circuit Overhaul: Includes 1 direct-fit engine crankshaft position sensor and 1 matching 3-pin pigtail wiring harness to replace both the sensor and damaged plug in one repair.
-
Eliminates Stalling & No-Start Issues: Resolves extended cranking, sudden engine stalling under operating temperature, rough idling, hesitation, and persistent crankshaft circuit error codes (such as P0335–P0339).
-
High-Temperature Severe-Duty Housing: Sensor and connector housing are molded from automotive-grade thermoplastic with integrated silicone seals to withstand high lower-block heat, oil mist, and road vibration.
-
Splice-Ready 3-Lead Pigtail: Features three pre-assembled wire leads with female blade terminals for a clean, secure splice directly into the factory engine wiring loom.
Product Description
ALPHALINK AUTO PARTS offers this complete 2-Piece Engine Crankshaft Position Sensor and Electrical Connector Pigtail Kit. Located low on the engine block near the transmission bellhousing, factory crankshaft sensors and their wiring harness plugs endure constant extreme heat cycles, hot oil mist, and engine vibration. Over time, internal sensor electronics drift out of calibration, while original plastic locking clips become brittle, crack, or allow oil and moisture to contaminate the terminal pins.
Replacing only the sensor when the harness plug is loose or heat-degraded often leaves intermittent stalls and check engine lights unresolved. This 2-piece kit provides a brand-new crankshaft position sensor alongside a fresh, weather-sealed 3-pin pigtail connector. Designed specifically for Part# GT8345 and EC1163, it directly replaces OEM numbers 06H906433C and 06H906433D, and interchanges with PC886. Shipped promptly from California and backed by a 5-Year Warranty, this complete kit provides a durable, cost-effective solution to restore engine timing synchronization and reliable starting.
Technical Specifications
-
Part Type: Engine Crankshaft Position Sensor & Electrical Connector Pigtail Kit
-
Condition: Brand New
-
Quantity Included: Total 2 Pieces (1x Sensor, 1x Connector Pigtail)
-
Placement on Vehicle: Lower Engine Block / Crankshaft Sensor Area
-
Part Number: GT8345, EC1163
-
MPN: GT8345, EC1163
-
OE/OEM Numbers: 06H906433C, 06H906433D
-
Interchange / Cross-Reference Numbers: PC886, CPS0066, SS12089, 2351589, 235-1589, 1800780, 180-0780, V10721320, 2CRK0328, 5S12685, S10303, EH0067, 009168731, GT8345
-
Category: Engine Management / Sensors & Wiring Pigtails
-
Connector Gender: Male
-
Terminal Gender: Female
-
Terminal Quantity: 3-Pin
-
Terminal Type: Blade
-
Wire Quantity: 3 Leads
-
Warranty: 5-Year Warranty
-
Location: California
Detailed Vehicle Compatibility
AUDI
-
2015-2020 | A3
-
2011-2020 | A4
-
2014-2020 | A4 ALLROAD
-
2013-2020 | A5
-
2012-2020 | A6
-
2013-2016 | ALLROAD
-
2019-2020 | Q3
-
2013-2020 | Q5
-
2014-2020 | S3
-
2010-2020 | TT
SEAT
-
2015-2017 | LEON
VOLKSWAGEN
-
2019-2020 | ARTEON
-
2018-2022 | ATLAS
-
2011 | BEETLE
-
2015-2019 | GOLF
Functions
-
Measures real-time rotational speed and position of the crankshaft to supply essential timing data for fuel injection sequencing and spark ignition.
-
Relays digital timing pulse signals directly to the ECM/PCM.
-
Positive-lock retention clip secures firmly onto the sensor body to prevent disconnects from engine torque and vibration.
-
Internal silicone weather seals prevent engine oil vapors, water spray, and road grime from corroding terminal pin cavities.
Symptoms of Failure
-
Check Engine Light (CEL) illuminated with active crankshaft position sensor circuit trouble codes.
-
Extended engine cranking, intermittent hard starting, or complete crank-no-start condition.
-
Sudden engine stalling while idling or driving at normal operating temperatures.
-
Tachometer (RPM gauge) dropping to zero or reading erratically during engine misfire events.
-
Broken retention clips, oil contamination inside the connector cavity, or loose terminal pins.
Diagnostic Trouble Codes (DTCs)
-
P0335: Crankshaft Position Sensor "A" Circuit Malfunction
-
P0336: Crankshaft Position Sensor "A" Circuit Range / Performance
-
P0337: Crankshaft Position Sensor "A" Circuit Low Input
-
P0338: Crankshaft Position Sensor "A" Circuit High Input
-
P0339: Crankshaft Position Sensor "A" Circuit Intermittent
Package Includes
-
1x Engine Crankshaft Position Sensor (Part# GT8345)
-
1x 3-Pin Electrical Connector Pigtail (Part# EC1163 with pre-wired leads attached)
Important Notes:
- Product Variation: Sensor/connector colors vary by supply chain. Performance is unaffected.
- Shipping Address: Verify address accuracy. Return costs deducted for insufficient addresses.
- Warranty: Refer to the Warranty tab for full coverage details.
- Fitment Verification: Please use the Compatibility tool at the top of the listing to confirm fitment for your specific Year, Make, and Model.
We offer a 30-day return policy for unused items in original, uninstalled condition. Buyer is responsible for return shipping unless the item is defective. Verified addresses only.
At Alphalink Auto Parts, we stand behind our components. This product is backed by an exclusive replacement warranty for 5 years from the purchase date.
Manufacturing defects in materials or workmanship. If the part fails under normal use, we provide a one-time brand-new replacement part shipped from our CA warehouse.
Contact us via eBay messages with your Order ID. Once verified, we ship your replacement at no cost to you.
Exchange-only. Refunds are not provided under the 5-year warranty period. Warranty does not cover labor costs or damage from improper installation.
Based in California, Alphalink Auto Parts is a proud US-based business dedicated to providing professional-grade automotive components. Built on trust and excellence, we specialize in high-quality pigtail connectors, sensors, and electrical parts designed to keep your vehicle moving with confidence. Thank you for supporting our community!