Features:
The HT30A is a test designed for automotive for signal testing. Measuring approximately 2.9 meters in length, it allows the for oscilloscope to be placed on a for workbench away from the vehicle during testing and maintenance. The 4mm connectors at the ends of the leads accommodate a wide range of probes, clamps, and hooks.
The features a fully shielded design to effectively minimize noise . To prevent tangling, the two leads (equipped with 4mm connectors) are of unequal length; the shorter ground connects easily to any grounding point, while the longer positive connects conveniently to the engine wiring harness. It is also compatible with a 20:1 attenuator, making it a highly versatile connection cable.
The HT25 automotive ignition probe is an inductive-capacitive probe designed for use with an for oscilloscope.
When used together, it allows for the testing of ignition parameters—such as primary and secondary waveforms—enabling the diagnosis of engine ignition status and providing a visual display of ignition voltage changes over time for each cylinder.
The pickup features three terminals: a BNC connector for the for oscilloscope, a ground clamp, and a high-voltage line connector. The pickup clamp acts as an attenuator, reducing the high-voltage for signal to a low-voltage level to protect the for oscilloscope from electrical damage.
Specifications:
Product Name: for signal test for oscilloscope probe
Model: HT30A, HT25
Material: ABS
for color: Black
size: Approx. 2.9 meters (9.5 feet)
Peak Attenuation Ratio: 10,000:1
Input Resistance: 50Ω
Usage Precautions:
(1) for Do not clamp the test clip directly onto the spark itself; instead, clamp it onto the insulated wire connecting to the spark to prevent damage and electric shock.
(2) Maintain a distance of at least 2 inches from other high-voltage lines to avoid . (3) HT25 attenuation ratio up to 10,000:1
Probe colors: Black/Blue/Yellow/Red/Green
Acupuncture probes: 5 pieces
Replacement needles: 20 pieces
Total probe length (single unit): 65 mm / 2.56 inches
Needle length: 37 mm / 1.45 inches
Package contents:
1 * Automotive for signal test for oscilloscope probe
Note:
1. The real for color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.