LMR®-600-LSZH

LMR-600-LSZH coaxial cable is an extremely popular product within the Times Microwave LMR coaxial cable range. The LMR-600-LSZH cable is recognised globally as the industry standard ultra low loss, fire retardant, flexible, low cost, lightweight, DC – 6GHz coaxial cable solution for many RF applications. This is also backed up by the best warranty and technical support in the business.

Important Alert: There are many "fake" or "alternative" attempted copies of the Times Microwave Systems LMR® High Performance Coaxial Cable and Connector range - buy only 100% genuine Times Microwave Systems Products - available only here on eBay from an official UK Authorised Distributor.

Why choose LMR-600-LSZH?

LMR-600-LSZH is a non-halogen (non-toxic), low smoke, fire retardant cable with excellent reliability, unsurpassed flexibility and ultra low attenuation. The LMR-600-LSZH cable has loss figures comparable to the extremely rigid corrugated coaxial cables, however it has superior flexibility with a much tighter bend radius. Installing the connectors on the LMR-600-LSZH cable versus corrugated copper cables is much quicker and simpler.

How is the LMR-600-LSZH low loss figures achieved?

This is achieved due to the cable construction specifications. The centre conductor uses a high conductivity, bare copper clad covered aluminium centre conductor material. The dielectric is nitrogen injected, foamed, closed cell, polyethylene which helps achieve 85% velocity of propagation. The dielectric has an aluminium foil outer conductor, which is chemically bonded on to it. Due to the cable construction, the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of LMR-600-LSZH is > 90 dB.

Outer Jacket

The LMR-600-LSZH jacket is made from fire retardant polyethylene. The cable jacket can withstand harsh outside environments and UV rays from sunlight, as well as being fully fire retardant to allow the cable to be routed indoors safely.

Flame meets the following certifications:

• IEC-332-1-2
• IEC 332-3 CAT.C
• UL-VW1
• UL-1581
• IEEE-383
• BS-4066-1
• BS-4066-3
• UL-1685
• NFPA-130

Smoke meets the following certifications:

• IEC-61034-2
• NES-711

Halogen meets the following certifications:

• IEC-60754-1
• BS 6425-1
• IEC-60754-2
• BS 6425-2

Frequency Operating Band

LMR-600-LSZH is designed to operate excellently from DC – 6GHz. For any frequency band at VHF and above, LMR is the obvious choice.

Applications

LMR-600-LSZH Flexible Low Loss Communications Coaxial Cable is ideal for:

• Jumper assemblies in wireless communications systems
• Short antenna feeder runs
• WLL
• GPS
• LMR
• WLAN
• WISP
• WiMAX
• SCADA
• 3G or 4G repeaters
• Radio antennas or receivers
• VSAT applications
• TVRO
• VHF radio communications
• UHF radio communications

Attenuation

Construction

Mechanical & Environmental

Compatible Connectors

This cable can be installed with the following connectors:

LMR-600 'TC' (solder-on centre pin) Connectors

TC-600-716FC, TC-600-716MC, TC-600-716M-X, TC-600-716M-RA-D, TC-600-HNMC, TC-600-LCM, TC-600-NF-X, TC-600-NF-BH, TC-600-NFC-BH, TC-600-NMC-2-D, TC-600-NMC, TC-600-NMH-X, TC-600-NMH-75/50, TC-600-NMH-RA-D, TC-600-QDSM, TC-600-TM-X, TC-600-TF-X, TC-600-TF-RP, TC-600-TM-RP, TC-600-TM-RA-D, TC-600-UMC, TR-600, TC-600-4310M-X, CR-600-X

LMR-600 'EZ' Install (non-solder) Connectors

EZ-600-4310M-X, EZ-600-4310M-RA-X, EZ-600-716F-X, EZ-600-716M-X, EZ-600-716M-RA-X, EZ-600-78 EIA, EZ-600-FM-75-X, EZ-600-FMH-75, EZ-600-NF-BH-X, EZ-600-NF-BH, EZ-600-NF-X, EZ-600-NMH-X, EZ-600-NM-75, EZ-600-NMC-2-D, EZ-600-NMK, EZ-600-NMH-RA-X, EZ-600-QNF-X, EZ-600-QNM-X, EZ-600-QNM-RA-X, EZ-600-SM-X, EZ-600-TF-X, EZ-600-TF-BH-X, EZ-600-TF-RP, EZ-600-TM-X, EZ-600-TM-RP, EZ-600-UM, EZ-600-UM-X, EZ-600-UM-RA-X, CR-600-X

LMR® is a registered trademark of Times Microwave Systems