eBay

Get a strong, confident grip on your battery terminals with these heavy‑duty jumper cable clamps — built for reliability in any jump‑start situation

Product Parameters:

Rated Current: 1100A

Rated Voltage: 12V

Product Attributes

Size: 6.10*4.41*1.07 inch

Material: Iron

Color: Silver

Packaging: 1*Positive Jumper Cable Clamp+1*Negative Jumper Cable Clamp

Package Sizes: 10.24*7.09*1.10 inch

Product Feature & Functions

Heavy‑duty metal construction – Provides excellent conductivity and stands up to repeated use without bending or losing grip strength

Insulated, non‑slip handles – Designed for comfort and safety. The material resists wear, reduces hand fatigue, and helps avoid accidental shorts

Method of Use:

1. Park the two cars head to head, with the distance between the cars no greater than the length of the jumper cables. After parking the cars, open their respective engine covers

2. Connect the red clamp of the jumper cable to the positive terminal of the dead battery. Note: If there is a plastic protective sleeve on the positive battery terminal, it should be removed first to allow the jumper cable to be connected to the metal pole of the positive terminal

3. Connect the red clamp on the other end of this jumper cable to the positive terminal of the charged battery. Take the same precautions as above

4. Connect one end of the black clamp of the jumper cable to the negative terminal of the energized battery. The other clamp is connected to a metal part of the engine, such as a protruding bolt or a metal bracket. This connection point should be chosen as far away from the battery as possible, and the connection should be made securely

5. Turn off any unrelated accessory electrical equipment on both vehicles, start the vehicle with the battery supplying the power, and let the engine run for a few minutes to allow the power to be fully charged

Insulated Grip: These battery cable clamps are constructed from heavy-duty iron for lasting durability and steady conductivity. The handle features an insulating wrap that resists slipping and wear, giving you a secure grip. A safer, more stable experience is guaranteed every time you use them
Strong Jaws: Inside each battery clips, a high-strength spring works together with sturdy jaws to grip battery posts firmly. Once attached, they resist loosening or falling off. This provides excellent contact and holding power, making these clamps a practical choice for daily jumper cable needs
Use Guidelines: Engines generate high current during operation, so using dedicated jumper cables is essential. Our jumper cable clamps are designed specifically for this task and are simple to operate. Note that you will need separate cables for connection
Compatibility: These battery charger clamps work with most car and boat batteries on the market. Use them to build new jumper cables, repair existing ones, or replace worn-out ends. Their wide-ranging application makes them an essential tool for any driver's roadside kit
Set Specifications: You will receive one red positive heavy-duty alligator clip and one black negative clip. Each measures 6.10 × 4.41 × 1.07 inches. Rated current is 1100A, and rated voltage is 12V. Before buying, please verify that these specifications match your vehicle's requirements