| Item | Specification |
|---|---|
| Model | HA113-27 |
| Nominal Voltage | 36V |
| Shipment Voltage | 38V~40V (approx. 50±5% state of charge) |
| Nominal Capacity (0.2C₅A) | 10Ah±5% (Capacity distribution: roughly 80~90% full capacity ratio, the rest meets tolerance requirements) |
| Max Charge Voltage | 42V (Constant current & constant voltage mode, cut-off current 0.01C₅A) |
| Discharge Cut-off Voltage | 27.5V (Constant current discharge, current 0.2C₅A) |
| Max. Charge Current | 4A |
| Standard Discharge Current | 10A |
| Max. Discharge Current | 18A |
| Over current protection | 60±10A |
| Weight (Approx.) | Approx. 2.0kg |
| Other functions | 0V at charging port; charge inhibit when no discharge |
| Cell Impedance (Max, at 1000Hz) | ≤150mΩ (Charged state) |
| Operating Temperature - Charge | 0℃ ~ 45℃ |
| Operating Temperature - Discharge | -10℃ ~ 60℃ |
| Storage Temperature (Within a month) | 0℃ ~ 45℃ |
| Storage Temperature (Within three months) | 5℃ ~ 40℃ |
| Storage Temperature (Within one year) | 10℃ ~ 35℃ |
2. Battery Characteristic
Unless otherwise specified, all battery tests shall be conducted under atmospheric pressure of 86kPa ~ 106kPa, ambient temperature of 20℃±5℃ and relative humidity of 45% ~ 75%. The battery shall be discharged at 1C₅A constant current to the cut-off voltage of 27.5V, and all tests shall be completed within two weeks after product receipt.
Standard Charging: Under ambient temperature of 20℃±5℃, charge at 0.2C₅A constant current. When the battery terminal voltage reaches the max charge voltage, switch to constant voltage charging until the charging current drops to ≤0.01C₅A, then stop charging.
| NO. | Item | Standard | Test Method |
|---|---|---|---|
| 1 | Discharge Capacity | Discharge capacity ≥ nominal capacity | Charge the battery or battery pack at 0.2C, cut-off current 0.01C, then rest for 0.5 h. Discharge at 0.2C under ambient temperature of 23℃±2℃ until reaching the voltage specified in the specification. The test can be repeated for 5 cycles. The sample is deemed qualified if it meets the standard in any one of the 5 cycles. |
| 2 | Cycle Life | Capacity ≥65% after 300 discharge cycles | Discharge at 1C₅A to cut-off voltage, rest for 30 min. Repeat this cycle for 300 times. |
| 3 | Rate Discharge Capacity
|
0.5C＞98%
|
Under standard atmospheric pressure, ambient temperature of 25℃±5℃ and relative humidity of 45%~75%. After the battery is fully charged per standard procedure, rest for 30 min. Discharge respectively at 0.5C₅A, 1C₅A and 3C₅A to cut-off voltage. Repeat for 3 cycles. The requirement is satisfied if any cycle meets the standard. |
2.2 Remarks
For matters not covered herein, other requirements for electrical performance and environmental adaptability shall refer to GB/T 31241-2014. The battery structure and functional adaptability shall be subject to the customer’s actual on-vehicle installation test and verification.
3. Description of Main Parts
| No. | Material Name | Model | Qty |
|---|---|---|---|
| 1 | Cell | EVE 18650-2600mAh | 40 |
| 2 | BMS / PCM Circuit Board | SAIWEI, 10S NMC, Separate Charge Port, 4A Charge / 18A Discharge | 1 |
| 3 | Auxiliary Materials | PVC Heat Shrink Film | 1 |
| 4 | Output Connection Mode | Charge Port: EL12
|
1 |
4. Dimensions of battery pack
Battery Pack Label Text (English Warning Label)
Model: HA292 Li-Ion Power Battery Pack, 36V, 360.0Wh, 10000mAh
⚠ WARNING
- Only use the specified charger. Other chargers may cause fire or explosion.
- Do not short-circuit the battery terminals, as this may lead to explosion or fire.
- Never modify the electrical system. Modifications may cause fire.
- Do not submerge the battery in liquid; this will result in permanent damage.
- Store the battery in a cool and dry environment.
- WARNING-TO reduce risk of injury, user must read instruction manual.
SHENZHEN HANI ENERGY TECHNOLOGY CO.,LTD Red: + Black: - 10INR19/66-4 Made in China
Italian ATTENZIONE Warning Label → English Translation
WARNING
- Read and follow all warnings and instructions carefully before use to avoid accidents and battery damage.
- Do not immerse the battery in water or other liquids. Do not store the battery in wet, hot or corrosive environments.
- Keep away from heat sources. Do not expose the battery to high temperatures or direct sunlight.
- Use only the designated charger. Stop charging immediately if abnormal conditions occur during charging.
- Do not connect the positive and negative terminals of the battery together.
- Do not touch the battery with metal objects; shorting the positive and negative poles may cause injury.
- Do not transport or store the battery together with metal items.
- Do not drop, crush, disassemble or pierce the battery. Discontinue use if the battery is deformed.
- Do not throw the battery into fire.
- Do not strike the battery with nails or other sharp objects.
- Do not expose the battery to temperatures above 60°C. High temperature will accelerate battery aging and damage its service life.
- If the battery emits unusual odors, overheats, leaks, swells or deforms during use or charging, stop using it immediately. Remove the battery from the device and stop charging.
CAUTION! DO NOT LOAD FOR TRANSPORT IF PACKAGE IS DAMAGED Product liability insurance by China ping and insurance CE
| Item | Description | Specification |
|---|---|---|
| Thickness | (mm) | 41±2mm |
| Width | (mm) | 71±2mm |
| Length | (mm) | 295±2mm |
| Wire length | (mm) | Charge: EL12, 3239 20AWG, exposed wire length (including terminal): 200±10mm
|
Spezifische Parameter
Nennspannung: 36 V
Nennkapazität: 10 Ah
Batterieleistung: 360 Wh
Spezifikation: 10S3P
Maximale Ladespannung: 42 V
Entladeschlussspannung: 27,5 V
max. Ladestrom: 3A
Standard-Entladestrom: 6 A
max. Entladestrom (BMS): 15A
Überstromschutz: 50A
Nettogewicht: 2.1 kg
Bruttogewicht: 2.5 kg
Batteriegröße: 14.96inch*2.95inch*1.50inch
Technostar EG31 (TES200)
Packungsinhalt:
1 * Batterie
Verpackungsgröße 370*70*110mm
Betriebstemperatur:
Ladung: 0℃～45℃
Entladung: -20℃～60℃
Note*
1. Verwenden Sie zum Laden des Akkus bitte das normale Marken-Ladege*ät. Die Ladezeit sollte 6 Stunden nicht überschreiten.
2. Es ist strengstens verboten, Batterien in Wasser und Feuer zu legen, um zu vermeiden, in die Nähe der Wärmequelle zu kommen. Es ist verboten, Metall und leitfähige Materialien zum Anschließen der Lade- und Entladeschnittstellen zu verwenden.
3. Wenn Sie den Akku längere Zeit nicht verwenden, halten Sie die Akkuleistung bitte zwischen 40 % und 70 %. Es wird empfohlen, den Akku alle zwei Monate aufzuladen. Andernfalls kann der Akku beschädigt werden, und dieser irreversible Schaden wird nicht von der Garantie abgedeckt.
4. Bitte bewahren Sie diese Produkte und Zubehörteile ordnungsgemäß auf und halten Sie sie von Kindern fern.
5. Unbefugte Selbstreparatur und Modifikation von Teilen können Schäden am Produkt verursachen, und solche vom Menschen verursachten Schäden fallen nicht unter die Garantie.
6.Bitte verwenden Sie dieses Produkt gemäß den örtlichen Gesetzen, Vorschriften und Beschränkungen.
Tipps:
Wenn Sie sich nicht sicher sind, ob dieser Akku für Ihr Elektrofahrrad geeignet ist, senden Sie uns bitte eine E-Mail.
Der Inhalt der E-Mail enthält die Parameter Ihres Elektrofahrrads so detailliert wie möglich
Zum Beispiel die Marke, das Modell; oder es sind bestimmte Parameter auf der ausgebauten Altbatterie vorhanden, einfach ein Foto machen und an uns senden
