5. Bitte erlauben Sie den leichten Farbunterschied durch die Aufnahme Licht und 1-3cm Fehler aufgrund der manuellen Messung verursacht, und stellen Sie sicher, dass Sie nichts dagegen haben, bevor Sie bestellen.
Application
It is suitable for various industries such as packaging, printing, food, textile, and engineering machinery, and different machines and production lines such as CNC equipment, mechanical equipment, grinding machines, milling machines, printing machines, production workshops, and assembly lines.
Specifications
Model: DM09 12V 200W NMRV40, 50
Material: Die-cast Aluminum Alloy, 40Cr Alloy Steel
Process: Tempering Heat Treatment, Fine Machining, NitridationTechnique
Color: Silver
Motor Type: Brushed Pure Copper Motor
Input Voltage: DC12V
Current: 23A
Output power: 200W
Speed: 1800RPM
Rated Torque: 6.4kg/cm
Ratio: 1:50 (50K)
1-meter Noise: About 70dB(Actual Smaller)
Product Size: 9*9cm/3.54*3.54in
Output Hole Diameter: 18mm/0.71in
Package Size: 35*17*15cm/13.78*6.69*5.91in
Gross Weight: 10kg/22.05lbs
Net Weight: 9kg/19.84lbs
Package Included
1*200W Gear Motor
Notes
Please note that if you need to adjust the speed, you need to use it with a controller (not included). The motor itself does not have a built-in output shaft.
If the motor has a small load and does not run for a long time, the controller can be adjusted to 50% of the full speed. When the motor is under high load and operates continuously for a long time, the controller should not be lower than 70% of full speed, as the motor decelerates by lowering the voltage. After lowering the voltage, the torque will also decrease, which may cause overload; At this point, due to the increase in current, the heat dissipation will deteriorate, and the motor will generate severe heat.
To ensure the heat dissipation of the product, please do not use it in a closed environment.
This product does not have waterproof properties, so please do not let it rely on damp environments or use it outdoors on rainy days.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.