🔌 DJI AC Power Adapter for Mavic Air – Fast Charging for Drone & Accessories
✅ Compatible Product
📦 Package Contents
-
1 × AC Cable (Please leave a message to tell us the plug type(s) used in your country.)
🔍 Product Overview
The DJI AC Power Adapter for Mavic Air is a dedicated charging solution that powers up your Mavic Air intelligent flight battery and remote controller at the same time, drastically cutting down preparation time between flights. In addition to the primary drone-related outputs, it features dual USB ports (5 V, 2 A each) so you can conveniently charge smartphones, tablets, or other USB devices without needing extra chargers.
With its wide input voltage range (100–240 V, 50–60 Hz), the adapter is suitable for worldwide use, making it ideal for travelers and professionals who operate in different regions. Charging times are approximately:
-
1 hour 20 minutes for a full charge of the Mavic Air intelligent flight battery alone.
-
2 hours for a full charge of the remote controller alone. When charging both simultaneously, times may vary depending on battery levels.
The adapter’s rated power of 50 W ensures efficient energy conversion while protecting your devices with stable voltage and current outputs:
-
Battery interface: 13.20 V, 3.79 A
-
USB interface: 5 V, 2 A (each port)
Compact yet powerful, this adapter streamlines your workflow by letting you power the drone system and personal devices from a single source.
✨ Key Features
-
Simultaneous Charging – Charges Mavic Air battery and remote controller at the same time.
-
Dual USB Output – Two USB ports (5 V, 2 A) for charging smartphones, tablets, and other USB devices.
-
Worldwide Voltage Compatibility – Input 100–240 V, 50–60 Hz for global use.
-
Fast Charging Times – Approx. 1 h 20 min for battery, 2 h for remote control (separate charging).
-
Stable & Safe Output – Battery port: 13.20 V, 3.79 A; USB port: 5 V, 2 A.
-
Compact & Travel-Friendly – Lightweight design with included AC cable for portability.
⚙️ Technical Specifications
-
Input Voltage: 100–240 V AC, 50–60 Hz
-
Battery Interface Output: 13.20 V DC, 3.79 A
-
USB Interface Output: 5 V DC, 2 A (each port)
-
Intelligent Flight Battery: 1 hour 20 minutes
-
Remote Controller: 2 hours
-
Package Includes: AC Cable × 1, Power Adapter × 1
-
Compatibility: DJI Mavic Air
💡 Usage Tips
-
Use Original AC Cable – For safe and optimal power delivery, use the supplied cable.
-
Charge in Well-Ventilated Area – Avoid covering the adapter during charging to prevent overheating.
-
USB Device Priority – If charging both drone and USB devices, monitor total load to maintain efficiency.
-
Travel Friendly – Thanks to wide voltage input, no voltage converter needed for international trips.
-
Check Connectors – Ensure battery and remote control connectors are clean and properly seated before charging.
⚠️ Important Notes
-
Device-Specific – Only compatible with DJI Mavic Air battery and remote controller; not for other DJI models unless specified.
-
Do Not Overload USB Ports – Each USB port supplies max 2 A; avoid high-power devices that exceed this limit.
-
Avoid Water & Moisture – Keep adapter dry during use and storage.
-
Heat Generation – Slight warming during charging is normal; disconnect if excessively hot.
-
Replacement Parts – Use only genuine DJI parts to ensure safety and performance.