Used to drive constant voltage LED products within the voltage range of DC5-24V. The main unit works with a RF remote controller, user can setup LED brightness and dynamic modes on the remote controller.
| Type | 17 Key RF Remote LED Controller |
| Supply Voltage | 5V/12V/24V (Wide Voltage) |
| Static Power Consumption | <1W |
| Maximum Load Current | < 12A（ 3 Channels） |
| Connection Mode | Common Anode(+) |
| Power | 5V30W 12V72W 24V144W |
| Working Temperature | -4 to 140℉(-20 to 60°) |
| Dimension | L1.6*W0.5*H0.2 Inch |
| Package Included | 1 X Mini 17 Keys RF Wireless Remote Controller(CR2025 Button Battery) |
| RGB control | 3 output channels, common anode |
| Battery Type: | CR2025 button battery |
Why does the remote control not work？
First of all, check whether you have removed the plastic spacer at the bottom of the remote control before using it (the plastic spacer isolates the battery power).
Whether the power supply is included？
Power supply/adapter/plug is not included in the package. Please choose a power supply with the same voltage as the original power supply.
Why the light strip is slightly bright or only red light up?
Reason: incorrect voltage use, please keep in mind: Input voltage=output voltage (the use of voltage depends on the light bar you use)
If the lighting effect is stuck, or the end of the LED strip gradually darkened to do？
Please add voltage to the LED strip in time. This is a normal physical phenomenon, and all the LED strips cannot avoid this problem.
What to do when your controller is connected to the light bar and the light appears to flicker?
Please do not worry, may be your light bar, the controller and the power supply between the three connection problems, the situation is varied, you can contact our , accompanied by your connection to the light bar model and photo!