SUNLU 1.75mm FDM Filament
| Material | Print Temperature | Platform temperature | Retraction Distance | Retraction Speed | Drying Temperature |
| PLA | 200-210℃:50-100mm/s 210-240℃:100-200mm/s | 50-60℃ | 0.8-1.2mm | 30-40mm/s | 50℃ |
| PLA+ | 200-210℃:50-100mm/s 210-240℃:100-200mm/s | ||||
| PETG | 250-260℃:50-100mm/s 260-280℃:100-200mm/s | 60-70℃ | |||
| High Speed Matte PETG | 230-240℃:50-100mm/s 240-255℃:100-300mm/s 255-270℃:300-600mm/s |
| PLA：Eco-friendly and non-toxic, completely plant-derived with biodegradable proper ties. High compatibility, perfect for begin ners to get started and provide a quality printing experience. |
| PLA+：Modified PLA material, designed to enhance printing performance. Good impact tough ness, drop and smash resistance is 5-10 times that of PLA. |
| PETG：Bright color, excellent toughness and impact resistance, able to withstand falls and impacts, not easy to break. |
| High Speed Matte PETG：Matte PETG, supports printing speeds of up to 600 mm/s |
Welcome! It is Sunlu Official Store!
About Sunlu Filament
* When printing, please refer to the printing parameters on the spool label. When the filament is not printed for a long time, it is better to dry it before printing.
Our filaments are vacuum packed at the factory. When not in use, please pack them in a sealed bag to prevent moisture from affecting the printing effect.
In addition, there is a hole on Sunlu's spool. When the filament is not in use, please thread one end of the filament through the spool hole to prevent tangling.
