The original packaging may show signs of shelf wear, including scuffs, creases, or dents, due to long-term warehouse storage.
If you are purchasing the last available unit, its packaging may have been opened solely for product photography.
Genuine Taco | Model 007-F5-7IFC | Cast Iron | Integral Flow Check | 115V | 1/25 HP
The Taco 007-F5-7IFC is a single-speed, wet-rotor cartridge circulator designed for residential and light commercial hydronic heating and cooling systems.
Featuring an integrated flow check (IFC), this circulator helps prevent unwanted gravity circulation and reverse flow, eliminating the need for a separate inline check valve in many applications.
Its durable cast iron housing, replaceable cartridge, and maintenance-free design make it a practical choice for hydronic heating system installations and replacements.
Genuine Taco Comfort Solutions circulator
Model / Part Number: 007-F5-7IFC
Durable cast iron pump housing
Factory-installed Integral Flow Check (IFC)
Helps prevent reverse flow and gravity circulation
Eliminates the need for a separate inline check valve in many installations
Single-speed, continuous-duty motor
Replaceable, field-serviceable cartridge
Self-lubricating wet-rotor design
No mechanical shaft seal
Quiet, efficient operation
Standard flanged connections
Impedance-protected motor
UL Listed
| Specification | Details |
|---|---|
| Brand | Taco |
| Model / MPN | 007-F5-7IFC |
| Product Type | Cartridge Circulator Pump |
| Series | Taco 007-IFC |
| Pump Housing | Cast Iron |
| Voltage | 115V AC |
| Frequency | 60 Hz |
| Phase | Single Phase |
| Motor Power | 1/25 HP |
| Rated Current | 0.74 A (Nameplate) |
| Motor Speed | 3250 RPM |
| Maximum Flow | 17 GPM |
| Maximum Head | 8.5 ft |
| Maximum Working Pressure | 125 PSI |
| Fluid Temperature Range | 40°F–230°F |
| Connections | Flanged |
| Compatible Flange Sizes | 3/4", 1", 1-1/4", 1-1/2" |
| Flange-to-Flange Length | 6-3/8" |
| Integral Flow Check | Yes |
| Impeller | Non-Metallic |
| Cartridge | Stainless Steel |
| Shaft | Ceramic |
| Bearings | Carbon |
| Seals | EPDM |
| Enclosure | Type 2 |
| Insulation Class | H |
| Motor Protection | Impedance Protected |
| UPC | 687752539288 |
According to Taco's published Competitive Model Cross Reference Guide, the 007-F5-7IFC is listed as a performance-based alternative to:
Grundfos UPS15-58FRC – Speed 1
Aquamotion AM7-FV
These cross-references are provided for model comparison only. Direct interchangeability is not guaranteed. Verify pump curves, motor specifications, flange orientation, installation dimensions, and system requirements before purchasing.
Residential Hydronic Heating Systems
Boiler Circulation
Radiant Floor Heating
Hydronic Heating and Cooling
Indirect Water Heater Circulation
Multi-Zone Heating Systems
Hydro-Air Fan Coil Systems
Closed-Loop Water Circulation
This listing is for the Taco 007-F5-7IFC cast iron circulator with an integral flow check, not the standard 007-F5 model without an IFC.
The cast iron construction is intended for compatible hydronic applications and is not recommended for domestic potable water recirculation.
Professional installation is recommended. Please verify the manufacturer's requirements and compatibility with your system before ordering.
WARNING: This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.