60 × 30 cm Red Concrete Texture Mold with Carrying Handles
A practical concrete stamping mold designed for courtyard paths and other concrete surfaces. It features a red modern look, easy carrying handles, and a simple structure for efficient manual use. 🚧
Key Features
- Durable Construction: Made of PU with seamless stamping and vacuum high-temperature heating molding process.
- Clear Texture Result: The uneven surface helps create a natural pattern with a neat and non-slip finish.
- Large Working Area: The 23.62 × 11.81-inch surface helps you stamp a larger area at one time.
- Easy to Carry: Built with carrying handles for easier movement on different job sites.
- Simple to Clean: After use, dirt can be rinsed off with water.
- Ready to Use: No assembly required.
Description
This concrete mold is designed for manual stamping work and is suitable for adding texture to concrete walls or floors. The jagged edges help create clear and tidy edges on the finished surface, while the carrying handles make it easier to move the mold to the desired area.
The bright red color and clean line design give it a modern appearance and can also serve as a warning on construction sites. It is intended for practical use in concrete imprinting projects where simple handling and efficient work matter.
Specifications
| Material | PU |
| Process | Seamless Stamping, Vacuum High Temperature Heating Molding |
| Color | Red |
| Operation Mode | Manual |
| Assembly Required | No |
| Style | Modern |
| Product Size | 60 × 30 × 1.7 cm / 23.62 × 11.81 × 0.67 in |
| Package Size | 30 × 60 × 1 cm / 11.81 × 23.62 × 0.39 in |
| Gross Weight | 1.5 kg / 3.31 lbs |
| Net Weight | 1.5 kg / 3.31 lbs |
Package Included
How to Use
- Pour the concrete first and smooth the surface.
- Sprinkle reinforcing material quickly and wait 10–20 minutes for it and the concrete underneath to solidify together.
- Smooth the surface, sprinkle the reinforcing material again where it is not even, and compact the surface.
- Evenly sprinkle mold release agent. There should be no water accumulation on the surface at this time, and it is strictly prohibited to work on rainy days.
- Press the mold and tamp it, alternately and gradually press the mold, then trim the edges and corners with small tools.
- After about 3 days, when the pavement is dry, rinse off the surface with water to remove the mold release agent.
- When the pavement is dry, brush on the protectant.
- Stamping is completed.
Important Notes
- Please check the style and size before purchasing.
- This product requires a mold release agent (not included) or mold lubricant (not included) to prevent sticking to the concrete.
- This listing includes only the concrete mold.
- Please allow slight color differences due to shooting light.
- Please allow a 1–3 cm error due to manual measurement.
If you need a practical concrete stamping mold for courtyard paths, driveways, sidewalks, parking lots, or similar projects, this listing is ready for your next job. 🙂