TWO RACK STYLES • ONE LISTING

Adjustable Overland
Truck Bed Rack System

Heavy-Duty Carbon Steel | Adjustable Height & Width | 2 × 36W LED Lights

PLEASE SELECT YOUR RACK STYLE BEFORE ORDERING

This is a multi-variation listing. You will receive ONE rack system in the style selected at checkout, not both styles. Dimensions and package contents depend on your selection. Side connecting bars are included only with Rack With Side Bars.

Choose Your Rack Style

STYLE A

Standard Rack

Two rack assemblies with adjustable height and width. Position the front and rear assemblies to suit your cargo and available mounting locations.

  • Height: 18.5–27.3 inches
  • Inner bed width with feet: 55.11–66.77 inches
  • No side connecting bars
  • Approximate product weight: 57 lbs

STYLE B

Rack With Side Bars

Two rack assemblies joined by adjustable side connecting bars. Adjust the height, width and front-to-back side bar length.

  • Height: 18.5–27.3 inches
  • Inner bed width with feet: 55.11–66.77 inches
  • Side connecting bars included
  • Side bar length: 37.7–60.7 inches

Compare Specifications

Specification A: Standard Rack B: Rack With Side Bars
Height from bracket base 18.5–27.3 in 18.5–27.3 in
Inner bed width with feet 55.11–66.77 in 55.11–66.77 in
Front-to-back adjustment Position the two assemblies as needed Side bars extend 37.7–60.7 in
Side connecting bars Not included Included
LED lights 2 × 36W 2 × 36W
Maximum static load 800 lbs per complete system 800 lbs per complete system
Maximum dynamic load 400 lbs per complete system 400 lbs per complete system

Load ratings are for evenly distributed weight across the complete two-rack system, not each rack. Your vehicle's bed rails, tonneau rails or mounting hardware may impose a lower limit.

Measure Before You Order

Required inner bed width with mounting feet: 55.11–66.77 inches

  1. Measure between the inner bed rail surfaces at both the front and rear mounting-foot locations, at the height where the feet attach.
  2. Check the bed rail shape, usable mounting lip and space for the feet and bolts. Do not assume front and rear widths are identical.
  3. Check for interference from bed liners, tonneau rails, cargo tracks and other accessories.

The 55.11–66.77-inch range applies with the mounting feet installed. It is not a T-slot spacing or direct-mount hole-spacing specification. Vehicle make and model alone do not guarantee fitment.

Potential Vehicle Applications — Measurement Required

The following are potential applications for both styles, subject to measurements, mounting method and the limitations below. This is not a guarantee for every bed configuration.

  • Ford: 2004–2026 F-150 / F-250 / F-350; 2019–2026 Ranger
  • Chevrolet / GMC: 2007–2026 Silverado / Sierra 1500 2500 HD 3500 HD; 2015–2026 Colorado / Canyon
  • Dodge / Ram: 2009–2026 Ram 1500 / 2500 / 3500
  • Toyota: 2007–2026 Tundra; 2005–2026 Tacoma
  • Nissan: 2005–2026 Frontier; 2004–2024 Titan; Titan XD subject to model-year and bed verification
  • Jeep: 2020–2026 Gladiator JT

Additional potential applications for Style A: 2007–2026 Chevrolet Silverado / GMC Sierra 2500 / 3500 HD.

Additional potential applications for Style B: 2002–2008 Dodge / Ram 1500 / 2500 / 3500.

Mounting Limitations

  • Both styles: Standard mounting feet are not suitable for narrow side rails, smooth/flat inner rails without a suitable mounting lip, or step-side/flare-side beds.
  • Both styles: Fitment is unconfirmed for RamBox and GMC CarbonPro composite beds.
  • Style B: Direct attachment to factory utility tracks, including Toyota Deck Rail and Nissan Utili-track, is not supported. Honda Ridgeline fitment is unconfirmed.
  • Style A: Factory utility-track attachment is not confirmed; contact us before ordering if you plan to use those tracks.

Installation & Tonneau Compatibility

Standard mounting — Style A: Secure the removable feet to suitable bed rails using the supplied bolts and nuts. Confirm the fastening points and any drilling requirements before ordering; no-drill installation is not guaranteed.

Standard mounting — Style B: Secure the removable feet using the supplied bolts. Drilling into the bed rail lip is typically required.

Direct drill-on mounting — Both styles: Remove the feet and bolt the rack frame to a flat, weight-bearing rail surface. Check hole spacing, available mounting area and load capacity before drilling.

T-slot mounting — Both styles: Possible only with compatible top rails on a tonneau cover. Verify track spacing, attachment points, load capacity and cover operating clearance. Compatible T-slot mounting hardware is not included. Compatibility with a cover is not guaranteed simply because it has T-slots.

Built for Cargo & Adventure

  • Heavy-duty carbon steel: E-coat primer with a textured black powder-coat finish.
  • Dual LED lights: Two 36W lights included with either rack style.
  • Accessory mounting slots: Pre-drilled slots provide attachment locations for cargo and accessories such as kayaks, surfboards, bikes and recovery boards. Additional cargo securing equipment may be needed.
  • Removable mounting feet: Choose a suitable mounting method after checking your bed and rail structure.

What's in the Box?

Included with either selected style:

  • 1 × disassembled bed rack system consisting of two rack assemblies
  • 4 × removable mounting feet
  • 2 × 36W LED lights
  • 1 × mounting hardware kit (bolts and nuts)
  • 1 × installation instruction manual

Style B also includes the adjustable side connecting bars. Style A does not include these bars.

T-slot mounting hardware is not included. Vehicles, tonneau covers and cargo accessories shown in listing photos are for demonstration and are not included.

Shipping & Support

Payment: Use the payment methods available at eBay checkout. Please refer to the listing for handling time and the estimated delivery date.

Shipping & assembly: Shipping costs depend on the delivery address. The rack ships disassembled. Allow approximately 1.5–2 hours for installation; actual time depends on the vehicle and mounting method.

Need help? Contact us through eBay messages for fitment, installation, missing hardware or return assistance. For fitment questions, send your year, make, model, selected rack style, front/rear mounting measurements and bed rail photos. Return eligibility and terms follow the listing's return policy.

Choose your style. Check both mounting widths. Receive only your selected configuration.