2 Pack High Flow Bottling Bucket Spigot Taps
Practical plastic dispensing taps for homebrew bottling buckets, brewing containers and compatible liquid storage vessels.
These are replacement plastic bucket spigot taps. Universal Hozelock compatibility and a standard 3/4-inch thread are not confirmed. Please compare the product dimensions and your existing bucket opening before purchasing.
Make Homebrew Bottling Easier
Designed for dispensing liquids from compatible bottling buckets, these manually operated spigots offer a convenient way to control flow during homebrewing and bottling tasks.
Illustrative product image. The pack contains two spigots in the selected colour.
Product Overview
These high-flow style plastic bottling spigots are intended for use with compatible homebrew bottling buckets and dispensing containers. Each tap features a manual turning handle, a hose connection outlet and a threaded mounting section with a sealing gasket.
The design can be taken apart for cleaning, making it a useful replacement or spare component for homebrew equipment. Supplied as a convenient pack of two, with black and blue colour options.
Key Features
🍺 Homebrew Bottling Use
Suitable for transferring liquids from compatible brewing and bottling buckets.
🔧 Manual Tap Handle
Simple turning handle allows the user to open and close the tap for controlled dispensing.
💧 Hose Connection Outlet
Tapered outlet designed for connection to appropriately sized flexible tubing. Confirm hose fit before use.
🧹 Disassemblable Design
The supplier describes a removable construction that allows access for cleaning.
📦 Convenient 2 Pack
Two matching spigots supplied for replacement, spare use or fitting to multiple compatible containers.
⚡ No Electricity Required
A mechanical dispensing tap that requires no batteries, charging or mains connection.
Product Dimensions
Approximate dimensions shown in the supplier's product photographs.
Product Gallery
Available in black and blue. Select your preferred colour variation before ordering.
Available Colour Options
Each pack contains two spigots of the selected colour unless the listing variation states otherwise.
Technical Specifications
| Product Type | Bottling Bucket Spigot / Dispensing Tap |
| Brand | Unbranded |
| Material | Plastic |
| Colour | Black / Blue (Selected Variation) |
| Pack Quantity | 2 Spigots |
| Approximate Length | 112 mm |
| Approximate Height | 74 mm |
| Required Installation Hole | 25.4 mm / 1 Inch (Supplier Stated) |
| Hose Compatibility | Verify Before Purchase — Supplier Specifications Conflict |
| Operation | Manual |
| Power Source | Not Required |
| Country of Origin | China |
Installation Guide
STEP 1 — Check the Bucket Opening
Ensure your container has a suitable mounting hole.
The supplier specifies a 1-inch diameter installation opening.
STEP 2 — Position the Tap
Insert the threaded mounting section through the container opening.
STEP 3 — Position the Gasket
Place the rubber sealing gasket on the outside of the bucket,
following the supplier's installation guidance.
STEP 4 — Secure Carefully
Tighten the fitting sufficiently to create a seal.
Avoid overtightening, which may damage plastic parts or the gasket.
STEP 5 — Test Before Use
Fill with a small amount of water and check for leaks before using
the container for bottling or liquid storage.
What's Included?
✓ 2 × Plastic Bottling Bucket Spigot Taps
Supplied in the colour selected at checkout. Fitting gaskets and retaining components are shown in the product photographs; confirm the exact supplied hardware with your seller stock. Buckets, hoses, bottle fillers and bottles are not included.
Important Buyer Information
- Hozelock compatibility: Not confirmed. Do not assume this is a standard Hozelock hose connector.
- Thread size: A standard 3/4-inch BSP thread has not been verified. The 1-inch supplier measurement refers to the installation hole, not necessarily the thread specification.
- Hose sizing: Supplier information mentions both 12 mm ID and 1/2-inch ID tubing. Confirm fit against your existing hose before ordering.
- Food contact: The supplier describes the plastic as food grade, but independent food-contact certification has not been supplied. Confirm suitability before using with consumable beverages.
- Leak prevention: Correct installation, gasket condition and compatible container dimensions are important. A leak-free seal cannot be guaranteed in every setup.
- Water butt use: May suit compatible containers, but fitting dimensions must be checked.
- Pack size: Two spigots are included. Containers, hoses and additional accessories are not included.
- Colour: Slight differences may occur due to lighting and screen settings.
Practical Accessories for Home Brewing
Discover useful home, garden and brewing accessories with clear product details to help you shop confidently.
Thank you for shopping with Well Tech Store.