
![]() | ![]() |

AI-assisted Diagnostic Tool: 
OE-Level Full System Diagnostic Scanner
MUCAR 892BT PRO has the ability to access all available system and subsystems codes, and perform a comprehensive scanning on ECUs: Engines/Transmission/Airbags/Immobilizer/Key Coding/ABS/Cruise Control/Instruments/ Self Leveling Suspension systems/Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip coding/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics, etc.
It supports the detailed Function :
--read fault codes: read and decode the DTCs to identify where the fault location is;
--clear fault codes: erase the DTCs to turn off the MIL after repairs;
--retrieve ecu information: allows you to retrieve vehicle information;
--Graph live data stream: view the dynamic data stream to determine vehicle condition
With the Diagnose Function , you can enhance performance, save energy, reduce emissions and more as following:
For Engine: detect common issues as Poor lubrication, Failing oil pump, Oil deposits and debris, Inadequate fuel and air compression, Leaking engine coolant, Blocked engine radiators, Prolonged engine detonation, Damaged oxygen sensors, Aged spark plugs, etc.
For SRS: pinpoint the trouble area as: a bad seat belt, a corroded crash sensor, or some water intrusion in a connector, etc.
For ABS: diagnose Blown sensor fuse, Low brake fluids, and Faulty sensor, etc.
For Transmission: avoid Grinding or shaking sensation in gear, Whining, humming or clunking noises, Burning smells, Gears Slipping, Low or Leaking Transmission Fluid, etc.
For TPMS: verify problems of Low tire pressure, Faulty in tire pressure monitor control module, Unknown tire sensor, Failure to identify tire sensor, etc.
Support Active Test(BI-Directional Control)
If the actuator is normal,without using the vehicle's controls,to get a significant boost in effectiveness:
[Turn on the radiator fan|Modulate the throttle|Open/close windows|Operate mirrors|Turn on/off the lights|Turn on/off the sound horn|Test door lock …]

Support 35+ Maintenance Services > FAST & EFFICIENT > Improve Repair Efficiency
1. Oil Reset: reset the oil life system and turn off the oil light after oil or oil filter replacements.
2. EPB Reset :the brake pad after replacing the brake pad, the servo motor, etc., deactivate/activate the brake control system, assist with brake fluid control, open and close brake pads, etc.
3. TPMS Reset : the tire pressure and turn off the tire pressure fault indicator.
4. BMS Reset : the monitoring unit of the car battery after replacing the battery or battery monitoring sensors.
5. DPF Regeneration: clear particulate matter from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance.
6. IMMO Keys: disable the lost vehicle keys and program the replacement key fob. ONLY For some Asian and American cars with low-grade IMMO.
7. Injector Coding: write the actual code of the fuel injection nozzle or rewrite the code in the ECU to the code corresponding to the fuel nozzle of each cylinder after replacing the ECU and the fuel injector, to accurately control or correct the fuel injection amount of each cylinder.
8. SAS Calibration: calibrate the steering angle after replacing steering-related parts.
9. Suspension Level Calibration: adjust the vehicle height sensor for level calibration when replacing the vehicle height sensor or control module in the air suspension system.
10. Throttle Adaption: Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.
11. Sunroof Initialization: initialize the sunroof data to set the sunroof to lock off, close in rain, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
12. Seats Calibration: specially designed for the seats with memory functions. Match the seat after repairing or replacing the seat.
13. ABS Bleeding: Help exhaust the air.
14. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.
15. Gear Learning: Monitors certain camshaft position sensors signals.
16. Tire Reset: Set the size parameters of the modified or replaced tire.
17. A/F Reset: Set or learn Air/Fuel ratio parameters.
18. Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
19. Coolant Bleeding: Activate the electronic water pump.
20. Nox Sensor Reset: Reset catalytic converter learned value stored in ECU.
21. ODO Reset: Copy, write or rewrite the kilometer value.
22. SRS(Airbag Reset): Resets the airbag data to clear the airbag collision fault indicator.
23. Transport Mode: Deactivate the transport mode.
24. Windows Calibration: Perform door window matching to recover ECU initial memory.
25. Language Change: Change vehicle system language.
26. EGR Adaption: Learn the Exhaust Gas Recirculation valve after being cleaned.
27. Stop/Start Reset: Set up the automatic start-stop function in ECU.
28. AFS Headlamp Reset: Initialize the adaptive headlamp system.
29. ECU Reset : After performing the ECU coding, some ECUs may not display the new code and will need to run this function to display the correct code
30. Clutch Matching:This function is used to learn the engagement point of the clutch at which the engine torgue is transmitted to the gearbox. To be carried outl after replacing the control unit, replacing/removing the gearbox or replacing the clutch
31. Rain & Light Sensor: The rain sensor is used to adiust the wining frequency and the light sensor adiusts the light intensity of the automatic headlights denendino on the ambient light and darkness. After replacing the windscreen or the sensor, the rain/driving light sensor must be initialised. with this service function, initialisation performs an adjustment of the rain/driving light sensor.
32. FRM Matching:This function resets the FRM control unit (installed in BMW and MINI vehicles). The reset clears fixed faults in the footwell module related to a short circuit of the lights
33. Turbocharging Matching :For learning after replacement of turbocharger system components or resetting the turbocharger learning value.
34. Gateway Module DataCalibration:After replacing the gateway control unit, there may be a VIN inconsistency, so the VIN needs to be changed.
OBD Check
By reading the mileage data of various systems of the vehicle, the vehicle's driving mileage can be comprehensively determine.
(The mileage is generally viewed by reading data streams from the transmission system, engine system, instrument system, body system, ABS system, etc. The specific details are subject to actual conditions, as not all cars support mileage reading.)
MUCAR 892BT PRO unlocks full OEM topology mapping with no extra charge. Its color-coded diagrams clearly visualize all ECU module connections, helping you quickly pinpoint circuit and communication failures.
Equipped with smart multi-channel scanning, it performs simultaneous multi-system diagnosis, greatly accelerating full-vehicle detection and boosting workshop troubleshooting efficiency. 
200000+ Car Coveage + LIFETIME FREE Update Online,NO IP Limited
For Amarica car models —— for FORD,for LINCOIN,for GM,for BUICK,for CADILLAC,for CHEVROLET,for CHRYSLER,for DODGE,for JEEP,for HM
For Europe car models —— for BENZ,for SMART,for SPRINTER,for BMW,for VW,for SKODA,AUDI,for OPEL,for LAMBORGHINI,for PORSCHE,for MAYBACH,for EURO FORD,for LANDROVER,for DR,for BENTLEYRollsRoyce,for ROVER,for MINI,for VAUXHALL,for FERRARI,for FIAT,for Abarth,for LANCIA,for Alfa,Romeo,for Maserati,for BUGATTI,for PEUGEOTCITROEN,for RENAULT,for SAAB,for VOLVO,for OPEL,for Dacia,for SEAT;
For Malaysia car mAakes —— for PERODUA(PERODUA), for PROTON;
For IRAN car makes ——for IKCO, for MVM, for SAIPA;
For Australian car makes —— for Austford, for Holden ;
For India car makes ——for TATA, for MARUTI, for MAHINDRA, for India HM;
For Russia car makes—— for GAZ, for VAZ;
For Brazil car makes ——for FIAT; for GM;
For ASIAN CAR makes ——for SAMSUNG,for DAEWOO,for SSANYYONG,for HYUNDAI,for KIA,for HONDA,for Acura,for TOYOTA,SCION,for LEXUS MAZDA,for NISSAN,Infiniti,forJPISUZU,TLISUZU,DAIHATSUSUZUKI,MITSUBISHI,for SUBARU,for CHANGCHENG,for HUACHEN,for ZHONGXING,for JACTY,QIRUI_TY,for ISUZU,for JINLONG,for CHANGAN,for LIUWEI_TY,for XINKAI,for JPISUZU,for ZHONGSHUN,for HAOQING,for HAFEI,for XIALI,for CHANGHE,ZHONGTAI,for Kowloon,for Brilliance,for LIFAN,for WEILI,FLYER,SSANGYONG,JIAO,for WEILI,LUXGEN.BYD,for CHERY.for ZOTYE.etc.
✔ CONTINUOUSLY GROWING Vehicle Coverage WITH UPDATES

| Materials sourced from | China |
|---|---|
| Country of Origin | China |
| Brand | Mucar |
| Manufacturer Part Number | Car Diagnostic Scanner OBD2 Tool |
| OBD Interface | CAN, EOBD, OBD, OBDII |
| Supported System | ABS, DPF, EPB, SAS, SRS, TPMS |
| Connectivity | Bluetooth |
| Vehicle Type | Passenger Vehicle |
| Accessories | Adapter Cable, Carrying Case, USB Cable, User Guide |
| Features | Backlit Display, Built-In Battery, Check Engine Light Shut Off, Colour Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display |
| 35+ Resests-2 | AdBlue Reset,Adaptive Front Lighting,Gear Learn |
| 35+ Resests-3 | ABS Bleeding,Battery Matching,DPF Regen,Transport Mode |
| 35+ Resests-4 | TPMS(Reset),Turbocharging Matching |
| Wide Compatibility | 🔥All Systems Diagnosis for 150+ car brands |
| 🔥Update | 🔥Lifetime Free update,👍No need subscription fee |
| Feature 1 | AutoAuth for FCA SGW |
| Battery | 4150mAh |
| Memory | 👍4GB + 64GB |
| Operating System | 👍Android 10.0 |
| Warranty | 1 Year |
| Type | Professional Car Diagnostic TOOL |
| Type 1 | Car Code Reader Scanner |
| Model | Mucar 892BT PRO with Thinkcar Tkey 101 |
| 35+ Resests-1 | Tyre Reset ,Windows Calibration |
| 35+ Resests-5 | Oil Maintenance Reset,Injector Coding |
| 👍Advantage 1 | Active Test/Bidirectional Scanner |
| 👍Advantage 2 | Support CAN-FD & DOIP,🔥 J2534 Protocol |
| ✅Features 1 | 🔥AI assisted |
| ✅Features 2 | 🔥Customize backgrounds |
| ✅Features 3 | 🔥Exclusive Technician community |
| 👍Advantage 3 | 🔥Topology Map |
| 👍Advantage 4 | VGA Guided Function |
