This lamp light stick is a slim LED tube that runs on its own rechargeable battery, so nothing trails behind it while it is in use. As a portable led light stick it comes in two lengths, 17cm and 32cm, with a moulded ABS and PC body. A full charge runs the light for around four to six hours. As an led light wand the colour temperature adjusts from 2800K at the warm end through to 6000K at the cool end, so the light can be matched to daylight coming through a window or to the bulbs already in the room. The colour rendering index is given as above 90. There are two ways to put it up — a magnetic back that holds to steel, and a hook for hanging. Used as a handheld led video light it is light enough to hold in one hand through a shot, and as a light wand the long thin shape spreads the light along its whole length. Charging runs at DC 5V.
| Two lengths Available as a 17cm tube or a 32cm tube. |
Built-in rechargeable battery Around four to six hours from a full charge. |
| 2800K to 6000K Adjustable from warm white through to cool white. |
Colour rendering above 90 The CRI figure given for this light. |
| Magnetic back and hook Two ways of mounting it, neither needing tools. |
ABS and PC body A moulded plastic tube, not glass. |
| Type | LED light stick / video fill light |
| Lengths | 17cm and 32cm |
| Material | ABS and PC |
| Colour Temperature | 2800K - 6000K |
| Colour Rendering Index | Above 90 |
| Power | Built-in rechargeable battery |
| Runtime | Approximately 4 to 6 hours |
| Charging Voltage | DC 5V |
| Mounting | Magnetic back and hook |
| 1 | Charge the light fully at 5V before the first use. |
| 2 | Press the switch to turn it on. |
| 3 | Set the colour temperature to suit the room or the camera. |
| 4 | Use the magnetic back on a steel surface, or the hook to hang it. |
| 5 | Recharge the light when it starts to dim. |