Ubiquiti NanoBeam 5AC Gen2 NBE-5AC-Gen2 5GHz Wireless Network Bridge

Product Description

The Ubiquiti NanoBeam 5AC Gen2 is a high-performance outdoor wireless networking device designed to provide reliable, long-range wireless connectivity between buildings, locations and network installations.

Using advanced 5GHz airMAX AC technology and an integrated directional antenna, the NanoBeam provides an effective solution for extending network connectivity without the need to install traditional physical Ethernet cabling between buildings.

Whether you need to connect an outbuilding, workshop, office, garage, remote property or separate building to your existing network, the NanoBeam offers an excellent alternative to expensive cabling installations.

Its compact integrated design combines the wireless radio and antenna into one weather-resistant outdoor unit, helping to simplify installation while delivering focused wireless performance.

Technical Specifications

Manufacturer Ubiquiti Networks

Product NanoBeam 5AC Gen2

Model NBE-5AC-Gen2

Product Type Outdoor Wireless Network Bridge

Wireless Technology airMAX AC

Wireless Frequency 5GHz

Operating Frequency 5150–5875MHz worldwide supported range

Wireless Standard 802.11ac-based airMAX AC

Antenna Type Integrated Directional Antenna

Antenna Gain 19dBi

Antenna Polarisation Dual Linear

Networking Interface 2 x Gigabit Ethernet RJ45

Wireless Management Integrated 2.4GHz Wi-Fi

Management Software airOS 8

Operating Modes Access Point and Station

Point-to-Point Connectivity Supported

Point-to-Multipoint Connectivity Supported

Channel Width Point-to-Point 10/20/30/40/50/60/80MHz

Channel Width Point-to-Multipoint 10/20/30/40MHz

Power Supply 24V 0.5A Gigabit PoE Adapter

Power Consumption Maximum 8.5W

Power Method 24V Passive PoE

Management LEDs Power, Ethernet and Signal Strength

Dimensions 189 x 189 x 125mm

Weight Approximately 530g

Mounting Pole Mount Included

Enclosure UV-Stabilised Outdoor Construction

Operating Temperature -40°C to +80°C

Operating Humidity 5–95% Non-Condensing

Long-Range Wireless Connectivity

One of the main advantages of the NanoBeam 5AC Gen2 is its ability to establish wireless network connections over considerable distances.

Its integrated 19dBi directional antenna focuses the wireless signal in a specific direction, helping to improve connection quality and reduce interference from unwanted signals.

This makes it particularly useful when connecting two buildings that are separated by a road, garden, field, driveway or other physical obstacle to traditional network cabling.

Rather than running hundreds of metres of Ethernet cable, two suitably configured wireless units can establish a dedicated wireless network bridge between locations.

Actual achievable distance and performance depend on installation, line of sight, interference, configuration and local radio regulations.

Ideal Applications

Connecting a house to a detached garage or workshop

Providing network connectivity to an outbuilding

Connecting separate offices or business premises

Extending an existing network across a farm or rural property

Wireless connectivity between warehouses and industrial buildings

Connecting CCTV camera networks across separate locations

Providing network connectivity to remote buildings

Internet connectivity for locations where running Ethernet cable is impractical

Point-to-point wireless networking installations

Point-to-multipoint wireless network deployments

Why Choose the NanoBeam 5AC Gen2?

Traditional networking generally relies on running physical Ethernet cables between devices and buildings. However, this can be expensive, time-consuming or impractical, particularly over longer distances.

The NanoBeam provides an alternative by transmitting network traffic wirelessly between suitably configured units.

Its directional antenna provides a more focused connection than conventional omnidirectional Wi-Fi equipment, making it particularly suitable for dedicated links between two locations.

The integrated design also means there is no need to purchase a separate wireless radio and external antenna.

Gigabit Ethernet connectivity provides a wired connection for your network equipment, while the PoE power arrangement simplifies installation by allowing power and network connectivity to be delivered over a single Ethernet cable.

For installers, businesses and networking enthusiasts, the NanoBeam offers a flexible and cost-effective solution for extending network infrastructure.

Outdoor Construction and Reliability

Designed specifically for external installation, the NanoBeam features a UV-stabilised enclosure and is engineered to withstand demanding outdoor conditions.

Its robust construction is rated for wind survivability up to 200km/h, making it suitable for a wide range of outdoor installations when correctly mounted.

The integrated signal-strength indicators also help with alignment during installation, making it easier to achieve the best possible wireless connection.

Installation and Compatibility

The NanoBeam is designed to operate as part of a Ubiquiti airMAX AC wireless networking system.

For a typical point-to-point installation, two compatible wireless devices are required, one configured as the Access Point and the other as the Station.

The device is managed through Ubiquiti's airOS software.

A suitable 24V passive PoE power supply is required. A compatible Gigabit PoE adapter is supplied with the original retail package.

Please note that this is a specialist wireless networking bridge rather than a conventional home Wi-Fi router or Wi-Fi range extender.

Correct configuration, alignment and a suitable radio connection between locations are important for achieving the best results.

Summary

The Ubiquiti NanoBeam 5AC Gen2 is an excellent solution for anyone looking to establish reliable wireless network connectivity between buildings or extend an existing network over longer distances.

Combining an integrated directional antenna, 5GHz airMAX AC technology, Gigabit Ethernet connectivity and a weather-resistant outdoor design, it provides a compact and professional wireless bridging solution.

Ideal for home users, businesses, network installers, CCTV installations and anyone looking for an effective alternative to running physical network cables.

A quality piece of Ubiquiti networking equipment offering impressive versatility for both domestic and commercial networking applications.