Mounting plate – compatible with IKEA 116791 – SKORVA, MALM, HEMNES – 4 sets
The mounting plate is a spare part for IKEA 116791 and fits MALM, HEMNES, BRIMNES, TARVA and YTTERVÅG bed frames with SKORVA center beams. For each bed, one plate is screwed to the inside of the headboard and one to the footboard; the middle beam is hooked into it and supports the slatted frame in the middle. The plate is made of 2 mm sheet steel, is galvanized and measures 100 × 64 mm. It is screwed on with two screws in the outer holes; the third screw per plate is included as a reserve.
At a glance
- ● compatibility – Spare part for IKEA 116791, suitable for MALM, HEMNES, BRIMNES, TARVA and YTTERVÅG bed frames with SKORVA center beam. The part number can be found in the bed assembly instructions.
- ● Technical data – Mounting plate made of 2 mm sheet steel, galvanized, 100 × 64 mm. Three Euro screws Ø 6.2 × 13 mm per plate: two for the outer holes on the head or foot part, one as a reserve.
- ● Galvanized steel – supports the central beam including the slatted frame and does not bend even after being assembled and dismantled several times.
- ● Application – There are two panels per bed, one on the inside of the headboard and one on the footboard. The SKORVA center beam is hung in it. Replacement if a panel is bent or missing after moving.
Please compare the part number in the bed assembly instructions before purchasing. It is usually on the second or third page.
Scope of delivery
4× mounting plate, galvanized, and 12× Euro screws (4 sets, 16 pieces in total), enough for 2 beds.
Not an original part from Inter IKEA Systems BV The naming of brands and protected trademarks serves solely to indicate the purpose of this spare part (Section 23 Trademark Act).