Breathe Cleaner Air in Your Cybertruck — OEM Fit, 3-Layer HEPA + Carbon Filtration

The Cybertruck's cabin is built for adventure, but dust, pollen, exhaust, and odors can still find their way in. This HEPA cabin air filter is designed specifically for the 2024+ Tesla Cybertruck, using a three-layer filtration system that combines a melt-blown electrostatic layer, a true HEPA layer, and granular activated carbon. The result is 99.97% filtration efficiency for particles as small as 0.3 microns — including PM2.5, dust, pollen, and smoke — while the activated carbon layer targets odors and vehicle exhaust.

It is a direct OEM-fit replacement. The dimensions match the factory filter exactly, so it slides into the original housing without modification. There is no drilling, no trimming, and no adapter. Pop off the frunk access panel, remove the HEPA filter cover, pull the old filter using its tabs, and slide the new one in with the airflow arrows pointing up. Most owners finish the job in under 15 minutes with basic hand tools.

Please Note: This listing is for the cabin air filter only. The Tesla Cybertruck vehicle is NOT included. Compatible with 2024+ Tesla Cybertruck only. Please verify your model year before purchasing.

Key Selling Points

• OEM-Fit for 2024+ Cybertruck – Molded to match the factory filter dimensions exactly. Slides into the original housing with no gaps, no trimming, and no modification. A true drop-in replacement.

• 3-Layer Filtration System – Combines a melt-blown electrostatic layer for initial particle capture, a HEPA layer rated for 99.97% efficiency at 0.3 microns, and granular activated carbon for odor and gas removal. Each layer handles a different contaminant.

• Targets PM2.5, Dust, Odors & Exhaust – Captures fine particulate matter, pollen, mold spores, and road dust, while the activated carbon neutralizes exhaust fumes, smoke, and unpleasant odors before they reach the cabin.

• 360° Air Purification Design – The filter uses double-layer activated carbon fabric alongside high-quality granular carbon to maximize contact area and filtration coverage across the entire filter face.

• Simple, Non-Destructive Installation – No special tools required. Remove the frunk access panel, take off the HEPA filter cover, pull the old filter by its tabs, and slide the new one in. The airflow arrows on the filter indicate the correct orientation.

• Long Service Life – Durable pleated construction and advanced media design maintain filtration efficiency over time. Tesla recommends replacement every 2 years, or every year for off-road and dirt-road driving.
  
  
  

  Package Includes

  • 1 x HEPA Cabin Air Filter with Activated Carbon

  Tesla Cybertruck vehicle is NOT included.

  Installation Guide

  1. Open the Frunk – Open the front trunk and remove the rear access panel to expose the HEPA filter housing.

  2. Remove the Filter Cover – Take off the HEPA filter cover to access the old filter.

  3. Pull the Old Filter – Use the pull tabs on the filter to slide it out of the housing. Note the airflow direction for reference.

  4. Insert the New Filter – Slide the new filter into the housing with the airflow arrows pointing upward. Confirm it seats flush.

  5. Reinstall the Cover and Panel – Reinstall the filter cover and the frunk access panel. Verify all clips and fasteners are secure.

  No drilling, cutting, or permanent modification required.

  FAQ

  Q: Will this fit my Tesla Cybertruck?
  A: It is designed for the 2024+ Tesla Cybertruck. It will not fit Model 3, Model Y, Model S, or Model X.

  Q: What is the filtration efficiency?
  A: The HEPA layer captures 99.97% of particles as small as 0.3 microns, including PM2.5, dust, pollen, and mold spores.

  Q: Does it remove odors?
  A: Yes. The granular activated carbon layer targets exhaust fumes, smoke, and other odors before they enter the cabin.

  Q: Is this a genuine Tesla part?
  A: No. This is a third-party aftermarket replacement designed to match the OEM filter's fit and function.

  Q: How often should I replace the filter?
  A: Tesla recommends replacement every 2 years, or every year if you frequently drive on dirt roads or in dusty environments.

  Q: Do I need special tools?
  A: No. The job requires only basic hand tools — you may need a trim removal tool or a flathead screwdriver to remove the frunk access panel. No drilling or cutting is required.

  Q: How long does installation take?
  A: Most owners complete the replacement in 10–15 minutes.

  Q: Is the Cybertruck vehicle included?
  A: No. This listing is for the cabin air filter only.

  Notes

  • Please confirm your vehicle is a 2024+ Tesla Cybertruck before purchasing. This filter is not compatible with other Tesla models.

  • Tesla and Cybertruck are trademarks of Tesla, Inc. This is a third-party accessory and is not affiliated with or endorsed by Tesla, Inc.

  • If you have any questions, please contact us through eBay Messages.