Why choose ACEL BS200?

ANCEL BS200 Smart Jump Starter System, Connected Under the Hood

About this item

✅Starting Assist System — Works as part of your vehicle after installation, automatically assisting every engine start. No repeated charging. No maintenance. Always ready.

 

✅ Help Battery Last Longer — Engine starts put heavy stress on your battery. BS200 super starter shares the cranking load every start, reducing battery strain to help extend (healthy/weak) battery service life by up to 300%.

 

✅ Built for Prepared Drivers — Ideal for short-trip commuters, drivers dealing with parasitic drain or extra electrical loads, owners of seasonal or second vehicles, drivers in cold climates, and anyone who wants to stay ahead of battery trouble.

 

✅ Start Dead Battery — Instantly start dead batteries with ANCEL BS200 supercapacitor power. Up to 3.0L / 2.5T on its own. Adds up to 700A of assist current to your vehicle's cranking power when installed.

 

✅ 24/7 Battery Monitoring— Detect battery problems before they leave you stranded. Receive early alerts, monitor battery health, and check starting history in the free app via Bluetooth 5.3.

 

✅ Dependable Performance— Maintenance-free supercapacitors deliver consistent starting performance year after year without jump starter aging. Reliable from -40°F to 176°F.

 

✅ Ultrasafe Design — Battery-free supercapacitors eliminate swelling, leakage, and fire risks. Engineered with flame-retardant materials and 10 built-in safety protections for long-term under-hood installation.

TECHNICAL SPECIFICATION

Working Voltage Range	5~20V
Maximum Output Voltage	15V
Discharging Current	700A
Working Temperature	-40°C~80°C (-40°F~176°F)
Service Life	100,000 charge/discharge cycles
Scope of Application	12V Vehicles
Charging Time	Type-C (5V/2A) Charging: 3~50 minutes
Fast charging by car batteries: 3~22 minutes
Communication Method	Bluetooth BLE 5.3
Average Power Consumption	3mA
Waterproof	IP65

FAQ AND SOLUTION

Question 1: Will the starter catch fire by itself?	This product contains no batteries at all. It won't catch fire by itself and is extremely safe. You can use it with confidence.
Question 2: Why can the starter device extend the battery life?	Since the internal resistance of the starter is much lower than that of the car battery, during the start-up moment, the current flows through the starter all the time. The starter thus undertakes the task of discharging the large current. From then on, the car battery no longer bears the heavy load, so its lifespan will be greatly prolonged.
Question 3: How do I operate the starter?	After the starter is installed, there is no need for any operation. Just start the engine directly. This product works fully automatically.
Question 4: Is it suitable to install a starter when the vehicle is not used for a long time? Will the starter drain the battery?	The average power consumption of the starter is only 3mA, which is far lower than the self-consumption of the vehicle and can be disregarded. Moreover, as long as the battery voltage exceeds 5V, the starter can still start the engine normally. This product is particularly suitable for installation when the vehicle is not used for a long time.
Question 5: If my car battery has failed, can I avoid replacing the battery by installing a starter?	This product can only solve the problem of starting the engine. When the battery is damaged, the battery capacity is very low and the voltage is significantly reduced. Some on-board systems detect that the battery voltage is too low and will prompt faults, and may enter an invalid state. Therefore, if the battery is damaged, it is recommended to replace it.
Question 6: Why does the car fail to start using the starter?	① The starter should be connected directly to the car battery terminals. Do not connect it to other cables. Check for proper connection and ensure that the positive and negative terminals are not loose. ② Check if the starter has sufficient power. Please use it when the green power-indicator light is constantly on. ③ When using the forced start via the app or manual button discharge, start the engine within 10 seconds.
Question 7: The Bluetooth connection between the app and the starter failed?	① After the first launch of the app, please add the device first. ② Check if Bluetooth on the mobile phone is enabled and if location permission is granted. According to G.oogle's regulations, for Android system version 6.0 and above, app needs to be granted permission for location access in order to use Bluetooth normally. ③ Even though the Bluetooth function and location permission of the mobile phone have been enabled, the connection still fails. Please restart the Bluetooth function of the mobile phone and try to connect again. ④ Confirm whether the starter is correctly connected to the battery. If it has been correctly installed but still cannot be connected, please remove the starter and reinstall it, then try to connect the Bluetooth again.
Question 8: Why doesn't the starter discharge when the car is starting?	Check if the starter fails to discharge due to low power level. It is recommended to use it when the starter is fully charged.
Question 9: How to wake up the starter in sleep mode?	① When the starter is connected to the vehicle battery and remains unused for an extended period, it will automatically enter sleep mode after 20 minutes of inactivity. The starter will wake up upon detecting vibration or a change in voltage. ② When the vehicle engine is starting up normally, the starter will be woken up immediately and start working.
Question 10: Is the 24V diesel vehicle suitable for installing this product?	For a 24V diesel vehicle, please choose a 24V starter. Do not use a 12V starter.
Question 11: Does installing this product have any impact on the car?	Not only in theory, but also after a large number of long-term actual tests, this product has no impact or harm on the car, so please feel free to use it.