Tosa Hand Forged Japanese NATA - Shirogami Steel, 150mm Blade, with Sheath
OVERVIEW
Japanese nata, hand forged in Tosa by the smith Higashi
Shu. Shirogami (white paper) steel laminated into soft
iron, 150 mm blade, with a sheath. New, made in Japan.
A nata is the Japanese forest knife - the tool for
limbing, clearing vines and splitting kindling. Heavier
in the hand than a machete, shorter and thicker than an
axe, and used with a short chopping stroke rather than a
swing.
6 mm thick at the spine, 55 mm deep at the heel. That
mass is the whole point: it carries through green wood
rather than bouncing off it.
Shirogami laminated into soft iron is the traditional
Japanese construction. A hard high-carbon core takes
and holds a genuinely sharp edge; the soft iron either
side absorbs the shock so the blade does not crack when
you hit a knot. It is the same construction used in
Japanese chisels and plane blades.
Kurouchi finish - the black forge scale is left on the
flats as it came off the anvil, and only the bevel is
ground bright.
Double bevel, so it works the same in either hand.
HAND FORGED - EACH ONE DIFFERS
THESE ARE FORGED AND FINISHED ONE AT A TIME.
The maker states plainly that dimensions vary
between pieces.
The figures below are nominal. Yours will be close to them, not identical
to them. The forge marks, the exact line of the edge and the grain of the
handle are what they are. If you want two identical tools, buy something
stamped out of a press.
SPECIFICATIONS
Smith : Higashi Shu, Tosa
Type : Nata (Japanese
forest hatchet)
Steel : Shirogami (white
paper) laminated
into soft iron
Edge : Double bevel
Finish : Kurouchi
(black forged)
Overall length : approx. 560 mm
Blade length : approx. 150 mm
Blade depth : approx. 55 mm
at heel
Blade thickness : approx. 6 mm
Handle : approx. 450 mm
Weight : approx. 640 g
Sheath : Synthetic leather,
included
Condition : NEW
[CONFIRM AND ADD BEFORE LISTING: total packed
weight with sheath.]
CARBON STEEL - IT WILL RUST
SHIROGAMI IS NOT STAINLESS. Left wet, it will
rust, and quickly.
Wipe it dry after every use and oil it before it goes away. Camellia oil
is traditional; any light oil works. The kurouchi flats will patina over
time, which is normal and does not harm the tool.
If you want something you can leave in a damp pack and forget, buy
stainless. This is not that tool.
NOT A SPLITTING AXE
It splits kindling. It is not for splitting rounds, and it is not for
striking with a baton against a knot. 6 mm of laminated steel is tough,
but a hard carbon core chips where a soft axe would deform.
CUSTOMS AND YOUR OWN LAW
THIS IS A BLADED TOOL. Some countries restrict
importing them, and some carriers will not
carry them.
Check what your own country allows before you buy. I ship from Japan and I
cannot clear a parcel your customs will not admit, nor refund a tool that
has been seized.
If you are unsure, ask me before buying and I will tell you what I know
about shipping to you.
AGE
I do not knowingly sell bladed tools to anyone under 18.
Shipped from Japan with tracking.