SAFE & SECURE SHOPPING
100% SATISFACTION GUARANTEED
FAST SHIPPING
NEW FNIRSI SWM-20 Portable Spot Welder Double Pulse Battery Welding Machine ..

Product Description


Product Features:


1. 1200A Ultra-High Current for Powerful and Stable Welding: Equipped with Grade A battery cells, it delivers a peak current of up to 1200A. The welds are strong and free from spatter, making it easy to weld 0.1–0.3 mm nickel sheets and 18650/21700 battery packs with ease.


2. Smart Multi-Mode Design for Beginner-Friendly Operation: Supports pre-welding / Pulse / Continuous / Interval modes. Pulse duration, interval, and number of continuous welds can be precisely adjusted. Parameters are clearly displayed on the LCD screen, ensuring controllable and adjustable welding results.


3. Portable, All-in-One Design for Welding Anytime, Anywhere: Features a built-in high-capacity battery, eliminating the need for an external power source. Paired with a portable welding pen, it allows for easy operation on a desk or outdoors, making it convenient for DIY battery pack assembly and battery repair.


4. Comprehensive Safety Protection for Peace of Mind: Built-in overcurrent, overtemperature, and overvoltage protection. The unit displays temperature, voltage, and current in real time, and automatically shuts down at high temperatures—ensuring the device and battery cells remain protected even if a beginner makes a mistake.


5. High-Definition Color Screen + Knob Control for Intuitive and Efficient Adjustment: The large color screen displays all parameters in real time. Combined with button and knob controls, parameter adjustments are quick and precise—eliminating the need for repeated test welds and adjustments, doubling your efficiency.


6. One machine, multiple uses—covers all scenarios: Not only can it solder nickel plates for lithium batteries, but it’s also suitable for spot welding hardware, jewelry repair, and model making—a versatile tool for DIY enthusiasts and repair technicians alike


7. Low power consumption and long battery life—capable of 1,500 continuous powerful spot welds per charge


8. Multiple preset time settings from 0 to 99 minutes; automatically shuts off when idle to prevent power waste based on actual usage



[Product Specifications]

Capacity: 5,000 mAh

Charging: 5V/2.1A

Discharging: 5V/2.1A

Welding Materials: Nickel sheets, iron sheets, stainless steel sheets

Welding Thickness: 0.1–0.5 mm

Welding Pen Length: Approx. 30 cm

Display: 2.4-inch TFT HD Color Screen

Maximum Welding Current: 1,200 A

Continuous Spot Welding: 1,500 cycles

Settings: 4-combination setting adjustment


Welding Delay: Sets the delay time for welding operations from 0.1 seconds to 9.9 seconds (default: 0.8 seconds)

Interval Between Spot Welds: Sets the time interval between consecutive spot welds; 0.1 seconds–9.9 seconds (default: 0.5 seconds)

Low Voltage Warning: Sets the warning threshold when battery voltage falls below the warning value; 3.7 V–4.0 V (default: 3.7 V)

Over-Temperature Warning: Sets the warning threshold when temperature exceeds the warning value; 45°C–99°C (default: 65°C)

Short-Circuit Protection: Enables or disables short-circuit protection; On/Off/Default: On

Language Settings: Sets the device’s display language; Chinese/English/Default: Automatic selection at startup

Volume Level: Sets the volume during device operation; 0–100%/Default: 100%

Screen Rotation: Sets the screen display orientation; 0°/180°/Default: 180°

Screen Brightness: Set the device screen brightness from 10–100% / Default: 100%

Auto Shutdown: Set the time before the device automatically shuts down: 0–99 minutes / Default: 10 minutes

Applications: Power bank repair / Cell phone battery soldering / Round battery soldering / Battery assembly

Product Features: High-quality battery cells / Impact protection / Voltage stabilization / Short-circuit protection / Low-temperature protection / High-temperature protection / Overcharge protection / Over-discharge protection

Soldering Thickness Specifications: Nickel-plated steel strip 0.4 mm (MAX) / Pure nickel sheet 0.25 mm (MAX) / Nickel-plated copper 0.1 mm (MAX) / Steel sheet 0.5 mm (MAX) / Iron sheet 0.3 mm (MAX) / Copper sheet 0.1 mm (MAX)


Operating Instructions:


1. Use the [↑] and [↓] buttons to cycle through options, and gently turn the [knob] to precisely adjust each parameter.


2. Preheating Pulse: Before spot welding, briefly heat the electrodes to reach the preset temperature.


3. Main Pulse: During spot welding, the device outputs a brief, high-energy pulse to generate sufficient welding heat while preventing the electrodes from overheating and avoiding excessive current that could burn through or melt the material. (Adjust the main pulse intensity based on actual conditions; if too high, it will burn through the material; if too low, the weld will not hold.)


4. Interval Time: To prevent the heating process from lasting too long, the electrodes from overheating, and the welding pen from being withdrawn from the joint too early, set the time interval between spot welding pulses to ensure a high success rate and quality of the weld. (On uneven surfaces, after the preheat pulse has softened the material, the interval time may be insufficient, causing the nickel strip to not adhere tightly to the battery surface.)


5. Number of Consecutive Welds: This feature serves to reinforce the weld. Once the welding pen makes contact, it will perform N consecutive welds. The default setting is 01. When welding thick nickel sheets, you may adjust the number of consecutive welds appropriately to reinforce the weld, but do not exceed the maximum weldable thickness.



Product List:

SWM-20 Spot Welder *1

2 Replacement Welding Tips *1

Data Cable *1

Nickel Sheet *1

2 Welding Pens *1

User Manual *1





1