Upgrade your home comfort with our High-Resilience EPDM Rubber Sealing Strip. Made from equably foamed, flexible EPDM rubber with a super durable grid adhesive backing, this weather stripping blocks wind, dust, sound, and cold air while protecting your doors and windows from slamming abrasion and noise.
✨ Key Product Features
- Strong Resilience & Collision Avoidance: Equably foamed EPDM rubber bounces back easily after extrusion, cushioning doors and windows effectively.
- All-Round Weather Protection: Great for preventing wind, dust, outside sound, and cold draughts.
- Noise & Abrasion Reduction: Protects door and window frames while reducing wear and slamming noise during opening and closing.
- Unique Grid Adhesive Backing: Super durable, strong mesh adhesive backing sticks firmly without peeling off.
- Easy to Cut & Install: Flexible and easy to trim with normal scissors—no professional tools required.
- Wide Application: Ideal for all kinds of sliding doors, sliding windows, closet doors, wardrobes, and security doors.
📏 Available Shapes & Sizes
⚠️ Important: Please measure your required gap width before buying.
| Seal Shape |
Dimensions (Width × Height) |
Best For |
| I Shape |
9mm × 2mm |
Very narrow gaps (1mm – 2mm) |
| E Shape |
9mm × 4mm |
Small to medium gaps (2mm – 3.5mm) |
| P Shape |
9mm × 5.5mm |
Medium gaps (3mm – 5mm) |
| D Shape |
9mm × 6mm |
Larger gaps (4mm – 6mm) |
📐 How Length Works (Please Read Before Use)
Each roll comes as a double strip. Please tear each roll vertically down the middle before using it. The total length is obtained by adding the two torn-apart sealing strips together:
- 5 Meter Option: 2 Rolls × 2.5 Meters = 5 Meters Total
- 10 Meter Option: 2 Rolls × 5 Meters = 10 Meters Total
🛠️ Installation & Usage Tips for Best Results
- Clean & Dry Surface: Make sure the installation surface is completely clean and dry before applying, otherwise the adhesive will be weakened.
- Press Firmly & Wait 24 Hours: Press the tape firmly after installation for a stronger bond. DO NOT open/close the doors or windows, or pull the tape within 24 hours after installation.
- Cold Weather Tip: Too cold weather is not suitable for direct installation. Heat the adhesive backing with a hair dryer for 2 minutes before sticking for maximum hold.
- Unsuitable Surfaces: Do not apply on oily surfaces, corrosive surfaces, easy-to-peel surfaces, rough dusty surfaces, or rain-soaked surfaces.