eBay

1/4"-20 Furniture Screws Threaded Inserts set:

80 pieces 1/4"-20 Furniture Screws Comes with 9.0mm White steel twist drill and 6mm Hex Spanner.
Features of insert nut:

These threaded inserts are inserted into a pre-drilled hole by screwing in, in that case the external protrusions bite into the wood, preventing the nut from either turning or pulling out.
Suitable application:

Easy to install and with good stability, have a good effect in the furniture combination, suit for all Furniture woods of pine, plywood, fiberboard, etc..
How to use:
pre-drill/ drill a suitably sized hole and enter with an Allen tool screw.
PS：1. The hole depth is 1-2mm longer than furniture screw;
2.If that hardness of the wood material is high, enlarged a little bit the screw hole to fit the screw.
Specification: Material:

high hardness and high quality carbon steel
Size:

Thread Type: 1/4"-20
External Diameter:0.410”(10.5mm)
Inside Diameter: 0.315”(8mm)
Total Length: 10mm.
Drill: 9.0mm
Hex Spanner: 6mm
Quantity:

80 x Furniture Screws
1 x Drill
1 x Hex Spanner
Note: Small objects and sharp drill bits, please keep away from children

80 pieces 1/4"-20 furniture screws threaded inserts for wood furniture. Comes with 9.0 mm white steel twist drill and 6mm hex spanner.
Internal thread insert type: 1/4"-20, it is not a metric nut, the thread inside the nut is different, match this type when selecting accessories
Material: High hardness and high quality carbon steel
Usage: Use the matching bit pre-drill /drill a well-sized hole (depth is 1-2mm longer than furniture screw), then use a proper 6mm internal hex tool to screw in. Tip: If the furniture wood is with high-hardness, please enlarge the screw hole.
Applications:These furniture screws are wear-resistant . Suitable for furniture hardwood/ solid wood, for furniture combinations.