| Model | ISOLAR- SMT- 2K- WIFI |
| Input Formation | L+N+PE |
| AC Input | 220V230/240VAC |
| Input Voltage Range | 90-280VAC±3V(Normal Mode) 170-280VAC±3V (UPS Mode) |
| Frequency | 50/60Hz/Adaptive |
| Rated Power | 1600W |
| Output Voltage | 220V230/240VAC±5% |
| Output Frequency | 50/60Hz±0.1% |
| Output Wave | Pure Sine Wave |
| Transfer Time(Adjustable) | 10ms for Computer Equipment,20ms for Household Equipment |
| Peak Power | 3200VA |
| Overload Ability | Battery Mode:119%105%~150% Load,2s@150%~200% Load,400ms@>200% Load |
| Grid connected Operation | |
| Output Voltage | No grid connection |
| Grid Voltage Range | No grid connection |
| Grid Frequency Range | No grid connection |
| Output Current | No grid connection |
| Power Factor Range | No grid connection |
| Max efficiency (DC/AC) | No grid connection |
| Rated Voltage | 12VDC |
| Constant Charging Voltage | 14.1VDC |
| Float Charging Voltage | 13.5VDC |
| PV Charging Method | MPPT |
| Max PV Input | 2000W |
| MPPT Tracking Range | 30~500VDC |
| MAX PV Input Voltage | 500VDC |
| MAX PV Charge Current | 100A |
| MAX AC Charge Current | 60A |
| MAX Charge Current | 100A |
| LCD | Can display operating mode/load/input/output |
| RS232 | 5PIN/Pitch2.54mm,Baud Rate 2400 |
| Expansion Slot Communication Interface | Lithium Battery BMS Communication Card/WIFI,2×5PIN/Pitch2.54mm |
| Parallel Interface | Not Support Parallel |
| Operating Temperature | -10℃~50℃ |
| Storage Temperature | -15℃~60℃ |
| Work Altitude | No more than 1000m,If 1000m<Rate power will lower, MAX 4000m,Refer |
| Operating Environment Humidity | Non Condensing |
| Noise | ≤50dB |
| Model | ISOLAR-SMT-4K-24V-WIFI |
| AC Input | 220/230/240VAC |
| Input Voltage Range | 90-280VAC±3V(Normal Mode);170-280VAC±3V (UPS Mode) |
| Frequency | 50/60Hz(Adaptive) |
| Rated Power | 3600W |
| Output Voltage | 230VAC±5% |
| Output Frequency | 50Hz±0.1% |
| Output Wave | Pure Sine Wave |
| Transfer Time(Adjustable) | 10ms for Computer Equipment,20ms for Household Equipment |
| Peak Power | 7200VA |
| Overload Ability | Battery Mode: 1s@105%-110% load;2s@150%-200% load;3s@130%-150% load;400ms@>200% load |
| Grid connected operation | |
| Output Voltage | 220/230/240VAC |
| Grid Voltage Range | 170-265VAC |
| Grid Frequency Range | 49-51Hz / 59-61Hz |
| Output Current | 16.7A |
| Power Factor Range | >0.99 |
| Max efficiency (DC/AC) | >98% |
| Rated Voltage | 24VDC |
| Constant Charging Voltage | 28.2VDC |
| Float Charging Voltage | 27VDC |
| PV Charging Method | MPPT |
| Max PV Input | 6500W |
| PV Input Voltage Range | 60~500VDC |
| MAX PV Input Voltage | 500VDC |
| MAX PV Input Current | 27A |
| MAX PV Charge Current | 120A |
| MAX AC Charge Current | 100A |
| MAX Charge Current | 120A |
| LCD | Can display operating mode/load/input/output |
| RS232 | 5PIN/Pitch2.54mm,Baud Rate 2400 |
| Expansion Slot Communication Interface | Lithium Battery BMS Communication Card,WIFI |
| Parallel Interface | Not Support Parallel |
| Operating/ Storage Temperature | -10℃~50℃ / -15℃~60℃ |
| Work Altitude | No more than 1000m,If 1000m<,Rate power will lower, MAX 4000m,Refer |
| Operating Environment Humidity | 20%~95% Non Condensing |
| Noise | ≤50dB |
| LWH(mm) | 440.3×309×125.5mm |
| Model | ISOLAR-SMT-6.2KW-WIFI |
| AC Input | 220/230/240VAC |
| Input Voltage Range | 90-280VAC±3V(Normal Mode) 170-280VAC±3V(UPS Mode) |
| Frequency | 50/60Hz(Adaptive) |
| Rated Power | 6200W |
| Output Voltage | 230VAC±5% |
| Output Frequency | 50Hz±0.1% |
| Output Wave | Pure Sine Wave |
| Transfer Time(Adjustable) | 10ms for Computer Equipment, 20ms for Household Equipment |
| Peak Power | 12400VA |
| Overload Ability | Battery Mode: 11s@105%~130% load ; 2s@150%~200% load ; 3s@130%~150% load ; 400ms@>200% load |
| Grid connected operation - output voltage | 220/230/240VAC |
| Grid connected operation - Grid voltage Range | 170-265VAC |
| Grid connected operation - Grid Frequency Range | 49-51Hz / 59-61Hz |
| Grid connected operation - Output Current | 26.9A |
| Grid connected operation - Power Factor Range | >0.99 |
| Grid connected operation - Max efficiency (DC/AC) | >98% |
| Rated Voltage | 48VDC |
| Constant Charging Voltage | 56.4Vdc |
| Float Charging Voltage | 54VDC |
| PV Charging Method | MPPT |
| Max PV Input | 8500W |
| PV Input Voltage Range | 60-500VDC |
| MAX PV Input Voltage | 500VDC |
| MAX PV Input Current | 120A |
| MAX PV Charge Current | 100A |
| MAX AC Charge Current | 120A |
| MAX Charge Current | 120A |
| LCD | Can display operating mode/load/input/output |
| RS232 | 5PIN/Pitch2.54mm, Baud Rate 2400 |
| Expansion Slot Communication Interface | Lithium Battery BMS Communication Card, WIFI |
| Parallel Interface | Not Support Parallel |
| Operating /Storage Temperature | -10℃~50℃ / -15~60℃ |
| Work Altitude | No more than 1000m, If over 1000m, Rated power will lower, MAX 4000m |
| Operating Environment Humidity | 20%~95% Non Condensing |
| Noise | ≤50dB |
| LWH(mm) | 440.3×309×125.5mm |
| Model | ISOLAR- SMT- 12KP- WIFI |
| Nominal Voltage | 220/230/240VAC |
| Voltage Range | 90-280VAC±3V(Inverter Mode); 170-280VAC±3V(UPS Mode) |
| Frequency | 50-60Hz Auto sensing |
| Rated Output Power | 11000W |
| Output Voltage(AC) | 220/230/240VAC±5% |
| Output Frequency | 50/60Hz±0.1% |
| Waveform | Pure sine wave |
| Transfer time(AC to DC) | 10ms for Computer Equipment, 20ms for Household Equipment |
| Peak Power | 22000VA |
| Overload Capacity(Battery Mode) | Battery Mode: 11s@105%-150% Load; 2s@150%-200% Load, 400ms@>200% Load |
| Grid connected Operation | |
| Output Voltage | 220/230/240VAC |
| Grid Voltage Range | 195-253VA |
| Grid Frequency Range | 49-51Hz/59-61Hz |
| Output Current | 47.8A |
| Power Factor Range | >0.99 |
| Max efficiency (DC/AC) | 0.98 |
| Nominal Voltage | 48VDC |
| Constant Charging Voltage | 56.4VDC |
| Float Charging Voltage | 54VDC |
| PV Charging Way | 2*MPPT |
| Max PV Input Power | 2*5500W |
| MPPT Controller Voltage | 90-500VDC |
| MAX PV Input Voltage | 500VDC |
| MAX PV Charge Current | 150A |
| MAX AC Charge Current | 150A |
| MAX Charge Current | 150A |
| LCD Display | AC input Voltage,AC input frequency,PV Voltage,PV Current,Output Voltage, Output Frequency, Battery Voltage,Load Current,etc. |
| RS232 | 5PIN/Pitch2.0mm |
| Expansion Sbit Communication Interface | 2*5PIN/Pitch2.54mm,Lithium battery BMS communication card,WIFI etc |
| Parallel Interface | Yes Max 9 parallel machines |
| Operating Temperature | -10-50℃ |
| Humidity | 20%-95%(Non-condensing) |
| Storage Temperature | -15-60℃ |
| Altitude | <1000m |
| Noise(dB) | ≤50db |
| Item | ISolar-SMH-II-2.2KW |
| ### Inverter Mode Specifications | |
| Rated Output Power | 2200VA/1800W |
| Output Voltage Waveform | Pure Sine Wave |
| Output Voltage Regulation | 230Vac±5% |
| Output Frequency | 50Hz |
| Peak Efficiency | 94% |
| Overload Protection | 5s @ ≥150% load; 10s @ 110% ~150% load |
| Surge Capacity | 2 × rated power for 5 seconds |
| Nominal DC Input Voltage | 12Vdc |
| Cold Start Voltage | 11.5Vdc |
| Low DC Warning Voltage | |
| @ load < 50% | 11.0Vdc |
| @ load ≥ 50% | 10.5Vdc |
| Low DC Warning Return Voltage | |
| @ load < 50% | 11.5Vdc |
| @ load ≥ 50% | 11.0Vdc |
| Low DC Cut-off Voltage | |
| @ load < 50% | 10.2Vdc |
| @ load ≥ 50% | 9.6Vdc |
| High DC Recovery Voltage | 14.5Vdc |
| High DC Cut-off Voltage | 15.5Vdc |
| No Load Power Consumption | <25W |
| ### Utility Charging Mode Specifications | |
| Charging Algorithm | 3-Step |
| AC Charging Current (Max) | 60Amp (@230Vac) |
| Bulk Charging Voltage | |
| Flooded Battery | 14.1Vdc |
| AGM / Gel Battery | 28.2Vdc |
| Floating Charging Voltage | 13.5Vdc |
| Charging Curve | Bulk (Constant Current) → Absorption (Constant Voltage) → Maintenance (Floating) |
| ### MPPT Solar Charging Mode Specifications | |
| Max. PV Array Power | 2000W |
| Nominal PV Voltage | 240Vdc |
| PV Array MPPT Voltage Range | 55~430Vdc |
| Max. PV Array Open Circuit Voltage | 450Vdc |
| Max. Charging Current | 80Amp |
| (AC charger plus solar charger) | |
| ### General Specifications | |
| Safety Certification | CE |
| Operating Temperature Range | -10°C to 50°C |
| Storage Temperature | -15°C ~ 60°C |
| Humidity | 5% to 95% Relative Humidity (Non-condensing) |
| Dimension (D * W * H), mm | 348*282*105mm |
| Net Weight, kg | 5 |
| Item | ISolar-SMH-II-3.2KW |
| ### Inverter Mode Specifications | |
| Rated Output Power | 3200VA/3000W |
| Output Voltage Waveform | Pure Sine Wave |
| Output Voltage Regulation | 230Vac±5% |
| Output Frequency | 50Hz |
| Peak Efficiency | 94% |
| Overload Protection | 5s @ ≥150% load; 10s @ 110% ~150% load |
| Surge Capacity | 2 × rated power for 5 seconds |
| Nominal DC Input Voltage | 24Vdc |
| Cold Start Voltage | 23.0Vdc |
| Low DC Warning Voltage | |
| @ load < 50% | 22.0Vdc |
| @ load ≥ 50% | 21.0Vdc |
| Low DC Warning Return Voltage | |
| @ load < 50% | 22.5Vdc |
| @ load ≥ 50% | 22.0Vdc |
| Low DC Cut-off Voltage | |
| @ load < 50% | 20.5Vdc |
| @ load ≥ 50% | 20.0Vdc |
| High DC Recovery Voltage | 29Vdc |
| High DC Cut-off Voltage | 31Vdc |
| No Load Power Consumption | <35W |
| ### Utility Charging Mode Specifications | |
| Charging Algorithm | 3-Step |
| AC Charging Current (Max) | 60Amp (@230Vac) |
| Bulk Charging Voltage | |
| Flooded Battery | 14.6Vdc |
| AGM / Gel Battery | 29.2Vdc |
| Floating Charging Voltage | 27Vdc |
| Charging Curve | Bulk (Constant Current) → Absorption (Constant Voltage) → Maintenance (Floating) |
| ### MPPT Solar Charging Mode Specifications | |
| Max. PV Array Power | 3000W |
| Nominal PV Voltage | 240Vdc |
| PV Array MPPT Voltage Range | 55~430Vdc |
| Max. PV Array Open Circuit Voltage | 450Vdc |
| Max. Charging Current | 80Amp |
| (AC charger plus solar charger) | |
| ### General Specifications | |
| Safety Certification | CE |
| Operating Temperature Range | -10°C to 50°C |
| Storage Temperature | -15°C ~ 60°C |
| Humidity | 5% to 95% Relative Humidity (Non-condensing) |
| Dimension (D * W * H), mm | 348*282*105mm |
| Net Weight, kg | 5.5 |
| Item | ISolar-SMH-III-4.2KW |
| Phase | 1-phase |
| Maximum PV Input Power | 6200W |
| Rated Output Power | 4200W/4200VA |
| Maximum Solar Charging Current | 120A |
| GRID-TIE OPERATION | |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| Start-up Voltage/Initial Feeding Voltage | 60VDC/90VDC |
| MPPT Voltage Range | 60~450VDC |
| Maximum Input Current | 1/18A |
| GRID OUTPUT(AC) | |
| Nominal Output Voltage | 220/230/240VAC |
| Output Voltage Range | 195~253VAC |
| Nominal Output Current | 18.2A |
| Power Factor | >0.99 |
| EFFICIENCY | |
| Maximum Conversion Efficiency(DC / AC) | 0.98 |
| TWO LOAD OUTPUT POWER | |
| Full Load | 4200W |
| Maximum Main Load | 4200W |
| Maximum Second Load(battery mode) | 1400W |
| Maximum Load Cut Off Voltage | 26VDC |
| Maximum Load Return Voltage | 27VDC |
| AC INPUT | |
| AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/180VAC |
| Acceptable Input Voltage Range | 90~280VAC or 170~280VAC |
| Frequency Range | 59~61±1Hz |
| Maximum AC input Current | 24.7A |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| MPPT Voltage Range | 60~450VDC |
| Maximum Input Current | 1/18A |
| BATTERY MODE OUTPUT(AC) | |
| Nominal Output Voltage | 220/230/240VAC |
| Output Wave Form | Pure sine wave |
| Efficiency (DC to AC) | 0.94 |
| BATTERY&CHARGER | |
| Nominal DC Voltage | 24VDC |
| Maximum Solar Charging Current | 120A |
| Maximum AC Charging Current | 100A |
| Maximum Solar+AC Charging Current | 120A |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| Start-up Voltage/Initial Feeding Voltage | 90VDC/120VDC |
| MPPT Voltage Range | 60~450VDC |
| Maximum Input Current | 1/18A |
| GRID OUTPUT(AC) | |
| Nominal Output Voltage | 220/230/240VAC |
| Output Voltage Range | 195~253VAC |
| Nominal Output Current | 18.2A |
| AC INPUT | |
| AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/180VAC |
| Acceptable Input Voltage Range | 90-280VAC or 170-280VAC |
| Maximum AC Input Current | 24.7A |
| Maximum Charging Current | 100A |
| PHYSICAL | |
| Dimension ,H*W*D(mm) | 420*350*110 |
| Cartoon Dimension ,H*W*D(mm) | 500*450*180 |
| Net Weight (kgs) | 8 |
| Gross Weight(kgs) | 9 |
| INTERFACE | |
| Communication Port | RS232/RS485/WIFI/GPRS/LITHIUM BATTERY |
| ENVIRONMENT | |
| Humidity | 5% to 95% Relative Humidity(Non-condensing) |
| Operating Temperature | -10℃~50℃ |
| STANDARD | |
| Compliance Safety | CE |
| Item | ISolar-SMH-III-6.2KW |
| Phase | 1-phase |
| Maximum PV Input Power | 6500W |
| Rated Output Power | 6200W/6200VA |
| Maximum Solar Charging Current | 120A |
| GRID-TIE OPERATION | |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| Start-up Voltage/Initial Feeding Voltage | 60VDC/90VDC |
| MPPT Voltage Range | 60~450VDC |
| Maximum Input Current | 1/22A |
| GRID OUTPUT(AC) | |
| Nominal Output Voltage | 220/230/240VAC |
| Output Voltage Range | 195~253VAC |
| Nominal Output Current | 27.0A |
| Power Factor | >0.99 |
| EFFICIENCY | |
| Maximum Conversion Efficiency(DC / AC) | 98% |
| TWO LOAD OUTPUT POWER | |
| Full Load | 6200W |
| Maximum Main Load | 6200W |
| Maximum Second Load(battery mode) | 2067W |
| Maximum Load Cut Off Voltage | 52VDC |
| Maximum Load Return Voltage | 54VDC |
| AC INPUT | |
| AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/180VAC |
| Acceptable Input Voltage Range | 90~280VAC or 170~280VAC |
| Frequency Range | 59~61±1Hz |
| Maximum AC input Current | 36.4A |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| MPPT Voltage Range | 60~450VDC |
| Maximum Input Current | 1/22A |
| BATTERY MODE OUTPUT(AC) | |
| Nominal Output Voltage | 220/230/240VAC |
| Output Wave Form | Pure sine wave |
| Efficiency (DC to AC) | 94% |
| BATTERY&CHARGER | |
| Nominal DC Voltage | 48VDC |
| Maximum Solar Charging Current | 120A |
| Maximum AC Charging Current | 100A |
| Maximum Solar+AC Charging Current | 120A |
| PV INPUT(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360/500VDC |
| Start-up Voltage/Initial Feeding Voltage | 90VDC/120VDC |
| MPPT Voltage Range | 60~450VDC |
| Maximum Input Current | 1/22A |
| GRID OUTPUT(AC) | |
| Nominal Output Voltage | 220/230/240VAC |
| Output Voltage Range | 195~253VAC |
| Nominal Output Current | 27.0A |
| AC INPUT | |
| AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/180VAC |
| Acceptable Input Voltage Range | 90-280VAC or 170-280VAC |
| Maximum AC Input Current | 36.4A |
| Maximum Charging Current | 100A |
| PHYSICAL | |
| Dimension ,H*W*D(mm) | 420*350*110 |
| Cartoon Dimension ,H*W*D(mm) | 500*450*180 |
| Net Weight (kgs) | 8.9 |
| Gross Weight(kgs) | 10 |
| INTERFACE | |
| Communication Port | RS232/RS485/WIFI/GPRS/LITHIUM BATTERY |
| ENVIRONMENT | |
| Humidity | 5% to 95% Relative Humidity(Non-condensing) |
| Operating Temperature | -10℃~50℃ |
| STANDARD | |
| Compliance Safety | CE |
| Model | ISolar-SMS-6.5KP-Wifi |
| AC Input | |
| Rated Input Voltage (VAC) | 208 / 220 / 230 / 240; L + N + PE |
| Voltage Range (VAC) | 90~280±3 (normal mode); 170~280±3 (UPS mode) |
| Frequency (Hz) | 50 / 60 (Auto Adaptive) |
| AC Output | |
| Rated Capacity (kW) | 6.5 |
| Surge Power (kVA) | 12 |
| Voltage (VAC) | 208 / 220 / 230 / 240 |
| Power Factor (PF) | 1 |
| Frequency | 50/60Hz±0.1% |
| Switch Time (ms) | 10 (normal mode) / 10 (UPS mode) |
| Wave Form | Pure Sine Wave |
| Overload Capacity (Battery Mode) | 1min@102%~120%; 10S@ >120%Load |
| Max. Efficiency (Battery Mode) | 94%@48VDC |
| Parallel Quantity | 9 |
| Charger (PV / AC) | |
| Solar Charger Type | MPPT |
| Max PV Input Current / Input Power | 27A / 9000W |
| MPPT Range@Operating Voltage (VDC) | 60~450 |
| Max PV Open Circuit Voltage (VDC) | 500 |
| Max PV Charge Current (A) | 120 |
| Max AC Charge Current (A) | 120 |
| Max. Charge Current (PV + AC) (A) | 120 |
| Battery | |
| Rated Voltage (VDC) | 48 |
| Battery Type | Lithium and Lead-acid |
| Interface | |
| HMI | LCD |
| Interface | RS232 / RS485 / USB |
| Monitoring | WiFi (Optional) |
| General Data | |
| Ingress Protection | IP21 |
| Operating Temperature | -10 ℃ ~ 60 ℃ |
| Relative Humidity | 5% ~ 95% (Non-condensing) |
| Storage Temperature | -15 ℃ ~ 60 ℃ |
| Net Weight (kg) | 9.4 |
| Dimensions (WHD) | 440*335*117mm |
| Max. Operating Altitude | 4000m (Derating above 1000m) |

