GEC6100D power station automation controller is used in the auto-mation and monitoring system of a single diesel generator set torealize automatic control of conventional generator sets.Automatic start/stop, data measurement, alarm protection and"three remote" functions.
The controller adopts a color liquid crystal (LCD) graphic display, which can display Chinese, English, easy to operate, reliable operation.GEC6100D power station automation controller adopts 32-bit mi-croprocessor technology to realize precise measurement, fixedvalue adjustment and Timing, threshold setting and other functions, most of the parameters can be adjusted from the front panel of the controller, and all parameters can be adjusted through the module's 485 interface or USB interface monitoring and adjustment. It has compact structure, simple wiring and high reliability, and can be widely used in automatic svstem.
Project
Content
Working voltage
DC8.0V to 35.0V continuous power supply
Power consumption of the whole machine
<3W (standby mode: ≤2W)
AC generator voltage input:
Three-phase four-wire
Single-phase two-wire
Two-phase three-wire
15V AC - 360 V AC (ph-N)
15V AC - 360 V AC (ph-N)
15V AC - 360 V AC (ph-N)
AC generator frequency
50Hz/60Hz
Speed sensor voltage
1.0V to 24V (effective value)
Speed sensor frequency
Maximum 10000Hz
Start relay output
16Amp DC28V DC power supply output
Fuel relay output
16Amp DC28V DC power supply output
Programmable relay output port 1
7Amp DC28V DC power supply output
Programmable relay output port 2
7Amp 250VAC passive output
Programmable relay output port 3
7Amp 250VAC passive output
Programmable relay output port 4
7Amp 250VAC passive output
Operation panel size
197mm x 152mm x 51mm
Recommended opening size
185mm x 139mm (module size 183mm x 137mm）
Current transformer secondary current
Rated: 5A
Working conditions
Temperature: (-25~70)°C Humidity: (20~90)%
Storage conditions
Temperature: (-30~+80)°C
Protection level
IP55: When a waterproof rubber ring is installed between the controller and the control panel.
IP42: When no waterproof rubber ring is installed between the controller and the control panel.
Insulation strength
Object: Between input/output/power supply Reference standard: IEC688-1992
Test method: AC1.5KV/1min Leakage current 3mA
Weight
0.56kg