The ABS MF154 HW W01*10-KS UKP high-temperature submersible pump from Sulzer has been designed to cover a wide range of internal and external dewatering applications, but primarily where the temperature of the medium exceeds the standard upper limit (40 deg C) to a maximum allowable temperature of 80 deg C. Applications Pumping of high-temperature discharge water from laundries, commercial dishwashers and washing machines. Filling and emptying of containers to the drainage of flooded cellars and removal of rainwater. Suitable for use in septic tanks and pumping effluent from locations below the backwash level in accordance with EN 12056. The vortex hydraulics are particularly suitable for the pumping of fluids containing gaseous or abrasive particles. The compact shape of the MF, fittings for easy mounting, and small sump requirements ensure a quick and cost-effective installation of the pump. Maximum allowable temperature of the pumped medium is 80 deg C. Features 10m lead. Simple, cost-effective, pump installation. Vortex hydraulics for blockage-free pumping in critical applications. Free-standing on legs or pedestal mounted. Discharge connections G 1½″ internal - 1¼″ adaptor. Mechanical and lip seals on rotor shaft. Thermal sensors to protect motor against overheating. Float switch for automatic level control. EasyFit plug-in cable connection. Fitted with Schuko plug Materials Upper lid: Stainless steel 1.4301 (AISI 304) Motor housing: Cast iron EN-GJL-250 Rotor shaft: Stainless steel 1.4021 (AISI 420) Volute: Cast iron EN-GJL-250 Impeller: Polyamide Cable: Neoprene Fasteners: Stainless steel 1.4401 (AISI 316)