eBay

Morrells Induro XL2 Clear 2K Polyurethane Wood Floor Lacquer is a professional two-component, waterborne polyurethane finish developed for timber floors exposed to demanding use, heavy foot traffic and regular cleaning.

Colour and appearance: Induro XL2 is a clear, transparent topcoat. Matt and Silk Matt describe the sheen, not the colour. The timber, stain and sealer beneath remain visible, while the lacquer may deepen and enhance their existing tone.

Its tough yet flexible formulation provides excellent resistance to abrasion, scuffs, spillages and mechanical wear while retaining clear, non-yellowing clarity that enhances the natural character of the timber.

Suitable for solid, engineered, parquet and herringbone flooring, Induro XL2 is an excellent choice for busy homes, commercial premises and other environments where a highly durable professional floor finish is required.

Supplied as a 5L two-component system with the appropriate catalyst . Available in Matt and Silk Matt finishes.

Why Choose Morrells Induro XL2?

Professional 2K waterborne polyurethane lacquer
Designed for medium to high-traffic floors
Excellent abrasion and scuff resistance
Strong resistance to spillages and everyday chemicals
Tough yet flexible protective coating
Clear, non-yellowing appearance
Fast 2-3 hour recoating time
Suitable for solid and engineered wood flooring

Suitable Flooring & Areas

Busy domestic homes
Hallways, kitchens and living areas
Retail premises and offices
Hotels, restaurants and hospitality environments
Medium to high-traffic commercial interiors
Solid wood flooring
Engineered wood flooring with a sandable wear layer
Parquet and herringbone flooring
Newly installed or professionally sanded existing floors

Wiltshire Wood Recommendation:
For most oak, pine and standard hardwood floors, apply one coat of Morrells Induro GP Wood Floor Sealer followed by the required coats of Morrells Induro XL2.

On tropical, naturally oily or potentially contaminated timber, substitute GP Sealer with Morrells Induro Isosil Wood Floor Sealer to isolate natural oils, waxes and other contaminants before lacquering.

Induro XL1 or Induro XL2?

Product	System	Best For
Morrells Induro XL1	1K waterborne polyurethane lacquer No catalyst required	Domestic and light to medium commercial floors where convenient ready-to-use application is preferred.
Morrells Induro XL2	2K waterborne polyurethane lacquer Catalyst included	Busy domestic, medium to high-traffic commercial floors and demanding environments requiring maximum resistance.

Choose Induro XL1 where simple one-component application is the priority. Choose Induro XL2 where increased abrasion, chemical and mechanical resistance is required.

Compatible Morrells Sealers

Compatible Sealer	Colour Effect	Best For
Morrells Induro GP Wood Floor Sealer	Enhances the natural warmth and grain definition of the timber.	Oak, pine and most commonly used solid and engineered wood flooring species.
Morrells Induro Isosil Sealer	Clear shellac-based barrier coat with excellent clarity.	Tropical, oily, resinous or potentially contaminated timber where natural oils, waxes or previous treatments could affect the lacquer.

Do not sand or denib the Induro GP Sealer coat before applying the lacquer. Always follow the relevant sealer instructions and test unfamiliar or previously treated timber before coating the complete floor.

Compatible Morrells Wood Stains

Morrells Induro XL2 can form part of a coloured professional floor-finishing system using a suitable Morrells interior wood stain beneath the recommended sealer and lacquer coats.

Stain Range	Appearance	Application Guidance
Morrells Light Fast Wood Stain	Fast-drying, rich translucent colour with strong grain definition.	Apply evenly, remove excess stain and allow it to dry completely before applying the appropriate Morrells floor sealer.
Morrells SCANDI Wood Stains	Nordic-inspired natural tones and contemporary pigmented colours.	Carry out a complete stain, sealer and lacquer test before treating the floor to confirm colour, adhesion and final appearance.

Browse the full Morrells wood stain range to select a colour before sealing and applying Induro XL2.

Staining Important: Only use a suitable interior wood stain beneath this lacquer system. Remove all excess stain and allow it to dry completely before sealing. Heavy stain deposits or unsuitable exterior and water-repellent stains may interfere with adhesion. Always complete a representative test area using the full stain, sealer and lacquer system.

Recommended Morrells Systems

Floor or Desired Result	Recommended System
Most oak, pine and standard hardwood floors	1 coat Morrells Induro GP Sealer followed by 2 coats of Induro XL2 for domestic use or 3-4 coats for commercial and high-traffic environments.
Tropical, oily or potentially contaminated timber	1 coat Morrells Induro Isosil Sealer followed by the required Induro XL2 lacquer coats.
Stained wood flooring	Suitable Morrells interior wood stain , followed by the correct GP or Isosil sealer and the required coats of Induro XL2.
Fine joints and surface defects	Fill before the final sanding stage using Morrells Mix & Fill , then complete the sanding, staining and coating system.

Technical Information

Product type	Two-component waterborne polyurethane wood floor lacquer
Pack size	5 litres, including the appropriate Induro XL2 catalyst
Available finishes	Matt and Silk Matt
Mixing ratio	9 parts lacquer to 1 part Induro catalyst by volume
Standing time after mixing	Approximately 5 minutes before application
Pot life	Approximately 5 hours after mixing
Application rate	Approximately 100-120ml per m², per lacquer coat
Approximate coverage	Up to approximately 60m² per 5L, per coat
Touch dry	Approximately 20-30 minutes at 18°C
Recoating time	Approximately 2-3 hours minimum at 18°C
Domestic coating system	1 coat of sealer followed by 2 coats of Induro XL2
Commercial coating system	1 coat of sealer followed by 3-4 coats of Induro XL2
Light use	After approximately 24 hours at 18°C
Fully hard	Approximately 5-7 days at 18°C
Traffic rating	Suitable for medium to high traffic once fully cured
Application tools	Short-pile mohair roller, mohair flooring pad or suitable T-bar applicator
Recommended conditions	Approximately 18-22°C with good ventilation and air movement
Intended user	Professional use

Coverage and drying times are approximate and will vary according to timber porosity, surface quality, temperature, airflow, humidity and application rate.

Choose Your Finish

Finish	Appearance	Best For
Matt	A modern, low-sheen appearance that keeps reflections restrained while allowing the natural grain to remain visible.	Contemporary domestic and commercial floors where a natural-looking finish is preferred.
Silk Matt	A soft satin-style sheen that adds greater visual depth and enhances the colour and definition of the timber.	Traditional or premium interiors where additional richness and grain definition are desired.

Floor Preparation

Inspect the floor and countersink any protruding fixings.
Sand the surface evenly back to clean, bare timber.
After the 80-100 grit sanding stage, fill suitable fine joints using Morrells Mix & Fill mixed with clean sanding dust from the floor.
Complete the remaining sanding sequence consistently across the area.
Vacuum thoroughly, including edges, corners and floor joints.
Ensure the floor is clean, dry and free from wax, oil and contamination.
If staining, apply the selected stain evenly, remove all excess and allow it to dry fully before applying the sealer.
Carry out a complete system test on the actual timber before starting.

Mixing

Measure nine parts of Morrells Induro XL2 lacquer to one part of the supplied Induro catalyst by volume.
Add the catalyst to the lacquer container and secure the lid properly.
Turn the container upside down and shake vigorously for approximately one minute.
Allow the mixed product to stand for approximately five minutes before application.
Use the mixed lacquer within approximately five hours.

Application

Apply one even coat of the selected Morrells floor sealer at the specified application rate.
Allow the sealer to dry fully. Do not sand or denib the GP Sealer coat.
Apply the first coat of Induro XL2 at approximately 100-120ml per m² using a short-pile mohair roller, flooring pad or suitable T-bar.
Work predominantly with the timber grain, maintaining an even film and avoiding pooling or excessive overlap.
Allow a minimum of approximately 2-3 hours drying at 18°C.
Lightly denib the dried XL2 coat using 150-180 grit mesh.
Sweep and vacuum thoroughly to remove all abrasive residue.
Apply the remaining coats required for the selected domestic or commercial coating system, lightly denibbing between lacquer coats.
Maintain good ventilation and suitable temperature throughout application and curing.

Recommended Application Accessories

Professional floor-finish rollers and applicators for even application across larger timber floors.
Clean plastic mixing vessels and measuring containers suitable for waterborne two-component coatings.
150-180 grit mesh or fine intermediate abrasives for denibbing between lacquer coats.
Professional dust extraction and vacuum equipment for removing sanding residue before each coat.

Cleaning & Maintenance

Allow approximately 24 hours before light use.
Allow the lacquer to reach full hardness over approximately 5-7 days before heavy traffic, damp cleaning or covering with rugs.
Use cleaners formulated specifically for lacquered and varnished wood floors .
Avoid steam cleaners, harsh detergents and excessive standing water.
Fit protective felt pads beneath furniture and movable objects.
Avoid dragging heavy furniture or equipment across the finished floor.

Important: Morrells Induro XL2 is a professional two-component product and must be mixed accurately at nine parts lacquer to one part catalyst. Once catalysed, it has a working life of approximately five hours and cannot be stored for later use. Do not use application equipment containing copper, iron, zinc, aluminium or platinum. Always follow the current Morrells Technical and Safety Data Sheets and carry out an adhesion test when coating over a non-Induro product.