Specification:
Applications: Home , Stage, Conference
Please note:
This FM wireless transmitter with volume control must be used with a device that has FM radio reception, such as an amplifier, speaker system, or PA system (not included). It cannot amplify sound on its own.
Simply set your device to FM radio mode, tune it to the same frequency as the transmitter, and you're ready for wireless sound.
Please be aware: This FM wireless microphone does not come with its own speaker or audio player.
Package included:
1*Wireless Transmitter
1*Headset Microphone
1* Tie Clip Microphone
1* Data Cable
1*Transmitter Manual
How to use：
Method one
1）Turn on the FM wireless transmitter, at this time the display will display a red digital frequency band, which can be adjusted to any frequency band, such as 107.5, and at the same time insert the wired headset microphone into the FM transmitter microphone
2）Turn on the player (amplifier) with FM radio function, pull out the antenna, and switch the player to the working state of FM radio
3）Operate the player to automatically search for channels. After the search is completed, press the "Previous/Next-Next" button to switch the same frequency to 107.5
4）After switching to the same frequency, the wireless microphone is automatically connected successfully, then you can put on the wired headline microphone to start the amplification
5）This FM wireless transmitter has a volume adjustment function, and the operation can be referred to - User Notes 2.
Method Two
1）Turn on the player (amplifier) with FM radio function, pull out the antenna,and adjust the player to the radio working state
2）At this time, the display of the player (amplifier) shows the digital frequency band of the radio, and you can choose the frequency band arbitrarily,such as 87.5
3）Turn on the FM wireless transmitter, press the "+/" key to adjust to the same frequency of 87.5, (remember, it must be the same frequency)
4）After adjusting to the same frequency, the wireless automatic connection is successful, and you can wear a wired microphone to start amplifying
Notice: If there is noise, please avoid the local radio station frequency when connecting, and adjust to other frequencies arbitrarily to see if there is any noise. Usually, the frequency above 100MHz has less noise.
Special Note
1）This FM transmitter has the functions of volume adjustment and frequency adjustment. Press the "+" and "" keys at the same time to switch between the volume mode and the frequency modulation mode. The display will automatically turn off after 8 seconds in non-operational state. and press any key to wake up. Display, the volume status is displayed by default when it wakes up.
2）This product has a volume adjustment function and adopts a power-saving design. During use (non-operating state), the display will automatically turn off after 8 seconds, Press the +\- key to wake up. When waking up, the default volume function can adjust the volume. Size, if you press the +i- key at the same time, you can switch to the frequency modulation function, Press the +\ key at the same time to enter the volume function.
3）This product has a high-energy polymer battery. The red light is always on when charging, and the red light is off when fully charged. it takes about 2-4 hours to fully charge.
4） Do not use this product in high temperature and humid environment, the charging voltage of this product is 5V, do not use this product while charging.