Wet Dental Model Trimmer Abrasive Disc Wheel Gypsum Arc
Features:
1. Connect One End of the Water Tube to the Nozzle of the Wet Model Trimmer and the Other End to the Tap, Open the Valve
2. Connect the Waste-disposal Tube to the Unit
3. Connect the Power Cord, and Switch on the Power Switch (O=off, L=on)
4. When Braking, It Is Normal to Hear Clicking Before the Sand Tablet Stops. If the Sand Tablet Makes Unusually Loud Noises, Remove It, and Use the Included Hex-wrench to Adjust the Screw on the Back Cover (18)
5. to Check If You Need to Replace the Abrasive Disk, Rotate the Disk by Hand and Estimate: If the Platform Jumps More than 2mm, Change the Disk. After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Closest to the Outside of the Sand Tablet)
Attention:
If There Is some Abnormal Noise When Working on
Possible Reason:① Axon Is Loosing ② Disc Is Not Plain Enough.
How to Solve It:①Dissemble the Disc⒃ with Spanner,Make the Snap
Ring Tightly;② Change the Disc.
The Machine Does Not Work When Power on
Possible Reason:① Fuse Get Burnt;② Motor Get Burnt;③ Switch Get Wrong.
How to Solve It:① Change the Fuse(22) Which Inside the Socket;② Change the Motor;③ Change the
Specifications
Voltage: 220v/60hz±10%
Power: 500w
Rotational Speed: 2800 Rpm
Dimensions: 44×35×35cm Weight of the Dental Trimmer: 20kg
Content:
1x Jt-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment
Warranty: One Year
Dental New Investment Vibrator 4" Round Shaker Oscillator Lab
This Variable-intensity Model Vibrator Is Ideal for Mixing Plaster/Gypsum, Pouring Models, and Investing. Quiet, Powerful, and Highly Durable, This Is the Perfect Tool for Any Dentist! It Comes Brand New in Original Factory Packagin and Is Covered by a One Year Warranty.
Specifications:
Voltage: 220v/60hz ±10%
Power: 100w
Dimensions: 14x15x11cm